Chauvet maverick mk1 spot User manual

User Manual

Maverick MK1 Spot User Manual Rev. 1
EDITION NOTES
The Maverick MK1 Spot User Manual includes a description, safety precautions, installation,
programming, operation and maintenance instructions for the Maverick MK1 Spot as of the release of this
edition.
Trademarks
CHAUVET, the Chauvet logo and Maverick MK1 Spot are registered trademarks or trademarks of Chauvet
& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other
company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2017 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
Document Revision
This Maverick MK1 Spot User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the latest version.

Maverick MK1 Spot User Manual Rev. 1
TABLE OF CONTENTS
TOC 1 of 2
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 3
What Is Included ........................................................................................... 3
Claims........................................................................................................... 3
Manual Conventions ..................................................................................... 3
Symbols ........................................................................................................ 3
Safety Notes.................................................................................................. 4
Personal Safety.............................................................................................................. 4
Mounting and Rigging.................................................................................................... 4
Power and Wiring........................................................................................................... 4
Operation ...................................................................................................... 4
Expected LED Lifespan................................................................................. 4
2. Introduction ................................................................................ 5
Description.................................................................................................... 5
Features........................................................................................................ 5
Product Overview.......................................................................................... 6
Product Dimensions...................................................................................... 7
3. Setup ........................................................................................... 8
AC Power...................................................................................................... 8
AC Plug.......................................................................................................................... 8
Fuse Replacement......................................................................................................... 8
Mounting ....................................................................................................... 9
Orientation...................................................................................................................... 9
Rigging........................................................................................................................... 9
Procedure....................................................................................................................... 9
DMX Linking.................................................................................................. 10
DMX Personalities.......................................................................................................... 10
Remote Device Management (RDM)............................................................ 10
Signal Connections....................................................................................... 10
Art-Net™ Connection..................................................................................................... 10
sACN Connection........................................................................................................... 10
Connection Diagram ...................................................................................................... 10
4. Operation .................................................................................... 11
Control Panel Operation................................................................................ 11
Menu Map..................................................................................................... 11
Operating Settings Configuration.................................................................. 15
Home Screen................................................................................................................. 15
Start Address ................................................................................................................. 15
Network Setup............................................................................................... 15
Ethernet To DMX ........................................................................................................... 15
IP Mode.......................................................................................................................... 16
Universe......................................................................................................................... 16
Artnet IP Address........................................................................................................... 17
Subnet Mask.................................................................................................................. 17
Personality .................................................................................................... 18
Settings......................................................................................................... 18
Control Mode.................................................................................................................. 18
Pan/Tilt Orientation ........................................................................................................ 18
Display Orientation......................................................................................................... 18
Pan/Tilt Angle Range..................................................................................................... 19
Blackout on Pan/Tilt Movement ..................................................................................... 19
Blackout on Color Movement......................................................................................... 19
Blackout on Gobo Movement......................................................................................... 19

TABLE OF CONTENTS
Maverick MK1 Spot User Manual Rev. 1
TOC 2 of 2
Touchscreen Calibration................................................................................................ 19
Touchscreen Lock.......................................................................................................... 20
Lock the Screen............................................................................................................. 20
Swap Pan and Tilt.......................................................................................................... 20
Pan/Tilt Speed................................................................................................................ 20
WDMX Reset ................................................................................................................. 20
Backlight Timer .............................................................................................................. 21
Loss of Data................................................................................................................... 21
Fan Speed...................................................................................................................... 21
Dimmer Curve................................................................................................................ 21
Dimmer Speed............................................................................................................... 21
Reset Functions............................................................................................................. 22
Factory Reset................................................................................................................. 22
Test Mode..................................................................................................... 22
Auto Test........................................................................................................................ 22
Manual Test ................................................................................................................... 22
System Information....................................................................................... 23
DMX Values.................................................................................................. 23
29 Ch.............................................................................................................................. 23
22 Ch.............................................................................................................................. 25
Design Wheels.............................................................................................. 28
Gobo Wheels ................................................................................................................. 28
Gobo Replacement........................................................................................................ 29
Color Wheel ................................................................................................................... 30
Offset Mode................................................................................................... 30
PAN................................................................................................................................ 30
TILT................................................................................................................................ 31
COLOR .......................................................................................................................... 31
GOBO ............................................................................................................................ 31
GOBO ROTATE............................................................................................................. 31
FOCUS1-GOBO 2.......................................................................................................... 31
FOCUS2......................................................................................................................... 31
FOCUS-GOBO............................................................................................................... 31
ZOOM ............................................................................................................................ 31
PRISM............................................................................................................................ 31
IRIS................................................................................................................................ 32
FROST........................................................................................................................... 32
CYAN............................................................................................................................. 32
MAGENTA ..................................................................................................................... 32
YELLOW........................................................................................................................ 32
MAC4............................................................................................................................. 32
MAC5............................................................................................................................. 32
MAC6............................................................................................................................. 32
Web Server................................................................................................... 32
Information..................................................................................................................... 33
Setup.............................................................................................................................. 33
Manual Test ................................................................................................................... 33
Firmware Update............................................................................................................ 33
Security.......................................................................................................................... 33
5. Technical Information................................................................ 34
Product Maintenance.................................................................................... 34
Error Indication.............................................................................................. 34
6. Technical Specifications ........................................................... 35
Photometrics Chart ...................................................................................... 36
7. Returns ........................................................................................ 37
8.Contact Us .................................................................................. 38

Page 3 of 38
Maverick MK1 Spot User Manual Rev. 1
BEFORE YOU BEGIN
1. BEFORE YOU BEGIN
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
• Maverick MK1 Spot
• Seetronic Powerkon IP65 power cord • 2 Omega brackets • Warranty Card
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Any reference to data or power connections in this manual assumes the use of
Seetronic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!
!

Page 4 of 38
BEFORE YOU BEGIN
Maverick MK1 Spot User Manual Rev. 1
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20).
• CAUTION:Whentransferring product from extremetemperatureenvironments, (e.g., cold trucktowarm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Make sure there are no flammable materials close to the product when operating.
• When hanging this product, always secure to a fastening device using a safety cable.
• Never carry the product by the power cord or any moving part.
Power and Wiring
• Always make sure you are connecting the product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Donotoperatethis product if there is damageonthehousing,lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
!

Page 5 of 38
Maverick MK1 Spot User Manual Rev. 1
INTRODUCTION
2. INTRODUCTION
Description
The Maverick MK1 Spot has an extremely flat field, CMY color mixing, a 5:1 zoom and multiple control
options. Powered by a 350 W LED engine, it includes one static and one rotating gobo wheel, a 7 position
+ white color wheel, variable frost and 3-facet prism. It can be controlled with DMX, sACN, Art-Net, or
WDMX, and can receive Art-Net or sACN in and send DMX out, simplifying cable runs.
Features
• Fully featured 350W LED yoke spot fixture including CMY color mixing, a color wheel, zoom optics,
and two gobo wheels, one rotating, and one static
• 16-bit dimming of master dimmer for smooth control of fades
• Variable CMY color mixing system to create a wide pallet of colors
• DMX, WDMX, sACN, and Art-Net for full flexibility of control options
• RDM Enabled for remote addressing and trouble shooting
• Converts TCP/IP to DMX for shorter data cable runs
• 7° to 33° zoom angle for variable beam sizes
• Iris, 3-facet prism, and frost for beam control
• True 1 compatible power input
• Battery backup touchscreen display with auto rotate depending on fixture orientation

Page 6 of 38
INTRODUCTION
Maverick MK1 Spot User Manual Rev. 1
Product Overview
Fans
Filters
DMX
Data In
DMX
Data Out
Ethercon
through
ports
Fans
WDMX
Antenna
Power
In
Power
Switch
Fuse
Front
Lens
Rubber
Feet
Rubber
Feet
Mounting Points
for Omega
Brackets
Menu
Button
Display

Page 7 of 38
Maverick MK1 Spot User Manual Rev. 1
INTRODUCTION
Product Dimensions
16.81 in
427 mm
4.57 in
116 mm
8.58 in
218 mm
5.31 in
135 mm
5.51 in
140 mm
14.61 in
371 mm
15.51 in
394 mm
9.84 in
250 mm
5.51 in
140 mm
10.39 in
264 mm
7.09 in
180 mm
8.07 in
205 mm
8.90 in
226 mm
13.66 in
347 mm
26.34 in
669 mm
5.51 in
140 mm
10.43 in
265 mm
20.12 in
511 mm

Page 8 of 38
SETUP
Maverick MK1 Spot User Manual Rev. 1
3. SETUP
AC Power
Each Maverick MK1 Spot has an auto-ranging power supply that works with an input voltage range of 100
to 240 VAC, 50/60 Hz. To determine the power requirements for each Maverick MK1 Spot, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.
.
AC Plug
The Maverick MK1 Spot comes with a power input cord terminated with a Seetronic PowerkonAconnector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your
product has no plug, or if you need the change the plug, use the table below to wire the new plug.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(F 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
!

Page 9 of 38
Maverick MK1 Spot User Manual Rev. 1
SETUP
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure to mount this product away from any flammable material as indicated in the Safety Notes
• Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The Maverick MK1 Spot comes with a double-bracketed yoke to which you can either attach mounting
clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
Omega Bracket
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)
Overhead Mounting Floor Mounting

Page 10 of 38
SETUP
Maverick MK1 Spot User Manual Rev. 1
DMX Linking
You can link the Maverick MK1 Spot to a DMX controller using a 3- or 5-pin DMX connection. If using other
DMX-compatible products with this product, you can control each individually with a single DMX controller.
DMX Personalities
The Maverick MK1 Spot uses a 3- or 5-pin DMX data connection for the 22- and 29-channel DMX
personalities.
• Refer to the Introduction for a brief description of each DMX personality.
• Refer to the Operation chapter to learn how to configure the Maverick MK1 Spot to work in these
personalities.
• The DMX Values section provides detailed information regarding the DMX personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Maverick MK1 Spot supports RDM
protocol that allows feedback to make changes to menu map options.
Signal Connections
The Maverick MK1 Spot can receive DMX, Art-Net™, sACN, or Kling-Net signal. The Maverick MK1 Spot
has 2 Neutrik® etherCON® through ports, and 3- and 5-pin DMX in and out ports. For more information
about DMX, read the DMX primer at: https://www.chauvetprofessional.com/wp-content/uploads/2016/06/
DMX_Primer.pdf.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using
an Neutrik® etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is
available from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Also known asANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and formatting of
Architecture for Control Networks to transport DMX512 data over IP or any otherACN compatible network.
ACN is maintained by the Professional Lighting and Sound Association (PLASA).
Connection Diagram
The three LED indicators in between the ethernet through ports indicate a connection
to a network and activity on that network. They do not indicate whether or not the
Maverick MK1 Spotis receiving a signal from a controller.
Switch or Router
(such as the NET-Switch from
CHAUVET Professional)
Maverick
MK1 Spot
Computer/
Controller
(running Art-
Net™ or
sACN
protocol)
TootherArt-Net™
or sACN devices

Page 11 of 38
Maverick MK1 Spot User Manual Rev. 1
OPERATION
4. OPERATION
The Maverick MK1 Spot has a touchscreen display as well as 6 control buttons. Navigate the menu
structure by pressing the buttons, touching the images of the buttons on the sides of the display, or
touching the desired menu option on the display directly. The touchscreen can be locked and calibrated
through the Setup options in the menu (see Touchscreen Calibration and Touchscreen Lock)
Control Panel Operation
Menu Map
Button Function
Navigates upwards through the menu list or increases the numeric value when in a
function <UP>
Exits from the current menu or function <MENU>
Navigates downwards through the menu list or decreases the numeric value when in a
function <DOWN>
Navigates left through the menu list <LEFT>
Enables the currently displayed menu or sets the currently selected value into the
selected function <ENTER>
Navigates right through the menu list <RIGHT>
Main Level Programming Levels Description
Address 000–255 Network Setting
Network
Setup
Ethernet to DMX YES Convert Ethernet In to DMX Out
NO
IP Mode Manual Selection of IP modeDHCP
Static
Universe 000–255 Set the Universe
IP 002.243.075.222 IP setting
SubMask 255.000.000.000 Subnet Mask
Personality DMX 22CH YES Choose 22 Channels of DMX
NO
DMX 29CH YES Choose 29 Channels of DMX
NO

Page 12 of 38
OPERATION
Maverick MK1 Spot User Manual Rev. 1
Settings
Control Mode
DMX
Signal Selection
WDMX
sACN
ArtNet
Pan Reverse YES Reverse the Pan
NO
Tilt Reverse YES Reverse the Tilt
NO
Screen Reverse NO Manually or automatically reverse
the screen
YES
AUTO
Pan Angle 540 Change the Pan angle360
180
Tilt Angle 270 Change the Tilt angle180
90
BL. O. P/T Move YES Enable/disable XY blackout
NO
BL. O. Color Move YES Enable/disable color blackout
NO
BL. O. Gobo Move YES Enable/disable gobo blackout
NO
Calibration YES Turn on Calibration
NO
Touchscreen Lock YES Lock the touchscreen
NO
Lock Screen YES Lock the buttons and touchscreen
NO
Swap XY YES Swap the pan and tilt
NO
XY Mode Fast Pan and tilt speed
Slow
WDMX Reset YES Reset the wireless DMX
NO
Backlight Timer
30S Set the backlight to turn
off automatically after a chosen
time
1M
5M
ON
Loss of Data Hold Loss of data setting
Close
Fans Auto Change the fan speed modeFull
ECO
Dimmer Curve
Linear
Set the dimmer curve
Square
I Square
Scurve
Main Level Programming Levels Description

Page 13 of 38
Maverick MK1 Spot User Manual Rev. 1
OPERATION
Settitlngs
Dimmer Speed Smooth Change the dimmer speed
Fast
PWM Option
600
PWM selection
1200
2000
4000
6000
25000
Reset Function
Pan/Tilt
YES/
NO Reset individual functions to
factory
Iris/
Prism
Color/
CMY
+CTO
Gobo/
Gobo
Rotate
Zoom/
Frost/
Focus
All
Factory Settings YES Reset all functions to factory
NO
Test
Auto Test Auto test the product
Manual Test
Pan
000 ~
255 Individually test each function/
channel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Virtual Shaking
Cyan
Magenta
Yellow
Color
Gobo
Gobo Rotate
Fine
Gobo Index
Gobo 2
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Prism
Main Level Programming Levels Description

Page 14 of 38
OPERATION
Maverick MK1 Spot User Manual Rev. 1
Test Manual Test
Prism Rotate
000 ~
255 Individually test each function/ channel
Iris
Frost
CMY Macro
CMY Macro
Speed
Special Function
Information
Fixture
Information
Ver V1 Current Version
Running Mode DMX Current Mode
DMX Address
Temperature Current Temperature
Fixture Hours Current active hours
IP Current IP address
SubMask Current subnet mask
MAC MAC address
Fan Information
Base Fan 1 Speed
View speed setting
Base Fan 2 Speed
Head Fan 1 Speed
Head Fan 2 Speed
Error
Information _______ Will appear on screen
Channel
Information
Frequency Hz
Status of individual channel
Pan
000 ~
255
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Channel
Information
Dimmer Fine
000 ~
255 Status of individual channel
Shutter
Virtual Shaking
Cyan
Magenta
Yellow
Color
Gobo
Gobo Rotate
Fine
Gobo Index
Gobo 2
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Prism
Prism Rotate
Iris
Frost
CMY Macro
CMY Macro
Speed
Special Function
Main Level Programming Levels Description

Page 15 of 38
Maverick MK1 Spot User Manual Rev. 1
OPERATION
Operating Settings Configuration
Home Screen
The Maverick MK1 Spot has a home screen that shows the protocol mode, the IP address or DMX
address, the DMX personality, and the current product temperature. To see the home screen, press.
<MENU> repeatedly until it appears on the display.
Start Address
To set the starting address, set the Control Mode and then follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Start Address, or touch the display where
it says Start Address.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Enter the starting address (001–512) with one of the following methods:
Type the address number using the number pad that shows on the touchscreen display.
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
5. Press <ENTER>.
Network Setup
Ethernet To DMX
The Maverick MK1 Spot can convert a single Ethernet input signal to a single DMX output signal.
To activate or deactivate the Ethernet to DMX function, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Ethernet to DMX, or touch the display where it says Ethernet
to DMX.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (deactivate) or YES (activate), or touch
the display where it says the desired setting.
7. Press <ENTER>.
The universe of the TCP/IP protocol will be the universe of the DMX function.

Page 16 of 38
OPERATION
Maverick MK1 Spot User Manual Rev. 1
IP Mode
The IP address of the Maverick MK1 Spot can be set manually, by the network, or to a pre-set static
address specific to each product. To set the IP Mode, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select IP Mode, or touch the display where it says IP Mode.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from:
Manual (set the IP address with the control panel),
DHCP (the network sets the IP address),
or
Static (a pre-set address specific to each product),
or touch the display where it says the desired mode.
7. Press <ENTER>.
Universe
The Universe must be assigned through the product menu. To set the Universe do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
Type the universe number using the number pad that shows on the touchscreen display.
or
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe or subnet is set as desired.

Page 17 of 38
Maverick MK1 Spot User Manual Rev. 1
OPERATION
Artnet IP Address
To set the IP address, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select IP, or touch the display where it says IP.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the IP address (from 000.000.000.000 to 255.255.255.255) with one of the following methods:
Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed. Use the
number pad on the display to enter the desired number.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the IP address is set as desired.
With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers) to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired
7. Press <ENTER>.
Subnet Mask
To set the Subnet Mask, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Network Setup, or touch the display where
it says Network Setup.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select SubMask, or touch the display where it says SubMask.
5. If using the buttons instead of the touchscreen, press <ENTER>
6. Set the Subnet Mask (from 000.000.000.000 to 255.255.255.255) with one of the following
methods.
Through the touchscreen:
a. Touch the display where it shows the byte (set of three numbers) to be changed. Use the
number pad on the display to enter the desired number.
b. Use the number pad on the display to enter the desired number.
c. Repeat until the IP address is set as desired.
With the buttons:
a. Use <LEFT> or <RIGHT> to select the byte (set of three numbers to be changed).
b. Use <UP> or <DOWN> to increase or decrease the value.
c. Repeat until the IP address is set as desired
7. Press <ENTER>.
In DHCP or Static IP Mode, the IP and SubMask menu settings have no effect on
the product.

Page 18 of 38
OPERATION
Maverick MK1 Spot User Manual Rev. 1
Personality
To set which DMX personality to use, do the following:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Personality, or touch the display where it
says Personality
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX 22CH or DMX 29CH, or touch the
display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (cancel) or YES (confirm) or touch the
display where it says the desired option.
7. Press <ENTER>.
Settings
To reach the Settings menu, follow the instructions below:
1. Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the display where it
says Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.
Control Mode
The Maverick MK1 Spot can be set to respond to DMX, WDMX, Art-Net™ or sACN. The protocol
configuration must be set for the product to respond correctly to the controller(s). See the Menu
Map for more information.
To configure the protocol for the Maverick MK1 Spot, follow the instructions below:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control
Mode.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet., or touch the
display where it says the desired option
5. Press <ENTER>.
Pan/Tilt Orientation
To set whether the pan or tilt orientation is normal or inverted:
1. Navigate to the Settings menu
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it says
the desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5. Press <ENTER>.
Display Orientation
To set which way the display faces, do the following:
1. Navigate to the Settings menu.
2. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and orients
itself accordingly), or touch the display where it says the desired option.
5. Press <ENTER>
For WDMX control, ensure the antenna is raised and there are no obstructions
between the controller and the product. See WDMX Reset for troubleshooting
information.