Chauvet LED-BANK4 User manual

Operating Instructions
DMX Channel Values
NOTE!
Please read all instructions carefully on fixture DMX control mode and addressing.
DMX channels 2, 3 and 4 functions are determined by the current settings of channel 1. For example,
while Channel 1 is set between 210 and 219 the following conditions will apply;
Channel 2 will control the Red leds
Channel 3 will control the Green leds
Channel 4 will control the Blue leds
CHANNEL VALUE FUNCTION CH 2 CH 3 CH 4
000 Ù009
010 Ù019
020 Ù029
030 Ù039
040 Ù049
050 Ù059
060 Ù069
070 Ù079
Static Colors
Blackout
Red
Green
Blue
Yellow
Purple
Cyan
White
Flash Speed
000 Ù249
Sound Active
250 Ù255
080 Ù089
090 Ù099
100 Ù109
110 Ù119
Color Changes
Color change 1
Color change 2
Color change 3
Color change 4
Flash Speed
000 Ù249
Sound Active
250 Ù255
120 Ù129
130 Ù139 Color change 5 Color change 6
140 Ù149
150 Ù159
160 Ù169
170 Ù179
180 Ù189
190 Ù199
200 Ù209
Sequential Color Chases
Color chase 1
Color chase 2
Color chase 3
Color chase 4
Color chase 5
Color chase 6
Color chase 7
Run Speed
0-100%
210 Ù219 RGB Color Mix RGB mode Red 0-100% Green 0-100% Blue 0-100%
220 Ù229 Color Fade Fade Speed
0-100%
1
230 Ù255 Auto Run (sound active only)
LED-BANK4 User Manual 12 2007-03-12/17:46