Chauvet Rogue R1 User manual

User Manual

Edition Notes
Rogue™ R1 Wash User Manual Rev. 2
Edition
Notes
The Rogue™ R1 Wash User Manual Rev. 2 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Rogue™ R1 Wash. Chauvet
released this edition of the Rogue™ R1 Wash User Manual in February 2015.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements are owned or licensed by CHAUVET®. Any other
product names, logos, brands,
company names, and other trademarks featured or referred to within this document are the
property of their respective trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification,
or printing of this manual or its content for any other purpose withou
t written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Rogue™ R1 Wash User Manual Rev. 2 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version. Go to
www.chauvetprofessional.com for the latest version.
Author Date Editor Date
D. Couppe
2/26/14
M. Trouard
4/9/15

Table of Contents
Rogue™ R1 Wash User Manual Rev. 2 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
Power Linking ...............................................................................................................................................................6
DMX Linking..................................................................................................................................................................6
DMX Personalities........................................................................................................................................................................6
Mounting.......................................................................................................................................................................7
Orientation ...................................................................................................................................................................................7
Rigging.........................................................................................................................................................................................7
Procedure ....................................................................................................................................................................................7
4. Operation...................................................................................................................................................8
Control Panel Description.............................................................................................................................................8
Control Options............................................................................................................................................................................8
Programming................................................................................................................................................................................8
Menu Map.....................................................................................................................................................................9
Menu Map (Cont.).......................................................................................................................................................10
Address.......................................................................................................................................................................11
Set the DMX Address................................................................................................................................................................11
Run Mode ...................................................................................................................................................................11
DMX Personality ........................................................................................................................................................................11
Auto Test....................................................................................................................................................................................11
Manual Test...............................................................................................................................................................................11
Setup...........................................................................................................................................................................12
Pan Reverse..............................................................................................................................................................................12
Tilt Reverse................................................................................................................................................................................12
Pan Angle ..................................................................................................................................................................................12
Tilt Angle....................................................................................................................................................................................12
Fans...........................................................................................................................................................................................12
Display.......................................................................................................................................................................................12
Screen Reverse .........................................................................................................................................................................12
Dimmer Curve............................................................................................................................................................................12
Dimmer Speed...........................................................................................................................................................................12
Color Calibration ........................................................................................................................................................................12
Reset Function...........................................................................................................................................................................13
Factory Reset Function..............................................................................................................................................................13
System Information.....................................................................................................................................................13

Table of Contents
-ii- Rogue™ R1 Wash User Manual Rev. 2
Offset Mode ................................................................................................................................................................13
Pan.............................................................................................................................................................................................13
Tilt..............................................................................................................................................................................................13
DMX Values................................................................................................................................................................14
DMX Values (Cont.)....................................................................................................................................................15
DMX Values (Cont.)....................................................................................................................................................16
DMX Values (Cont.)....................................................................................................................................................17
DMX Values (Cont.)....................................................................................................................................................18
DMX Values (Cont.)....................................................................................................................................................19
DMX Values (Cont.)....................................................................................................................................................20
DMX Values (Cont.)....................................................................................................................................................21
DMX Values (Cont.)....................................................................................................................................................22
DMX Values (Cont.)....................................................................................................................................................23
DMX Values (Cont.)....................................................................................................................................................24
DMX Values (Cont.)....................................................................................................................................................25
5. Technical Information.............................................................................................................................26
Product Maintenance..................................................................................................................................................26
6. Technical Specifications.........................................................................................................................27
Returns .......................................................................................................................................................................28
Contact Us...................................................................................................................................................28

Before You Begin
Rogue™ R1 Wash User Manual Rev. 2 -1-
1. BEFORE YOU BEGIN
What Is
Included
•Rogue™ R1 Wash
•Neutrik® powerCON® power cord
•Omega bracket with mounting hardware
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In addi
tion, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- Rogue™ R1 Wash User Manual Rev. 2
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained Chauvet
certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•Always carry this product by the handles. Do not carry from the head.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage to the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•Do not aim this product toward the Sun. The lenses could concentrate the solar energy
and cause internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.

Introduction
Rogue™ R1 Wash User Manual Rev. 2 -3-
2. INTRODUCTION
Description
The Rogue™ R1 Wash is a compact, electronic, moving yoke product equipped with 7 quad-
color RGBW 15-watt LEDs. Rogue™ R1 Wash
is a powerful wash product that features smooth
pan and tilt operation
, an 11° to 48° zoom range, and a unique lens system that gives you an
even, professionally combined color wash.
Features
•DMX Channels: 14, 15, 19 or 21
•Pan: 540°
•Tilt: 230°
•7 RGBW LEDs, 15 W each
•3- and 5-pin DMX input/output connections
•Unique lens design for excellent color blending
•Fast, smooth pan and tilt movement
•6 distinct dimming modes
•Omega mounting bracket, fits all Rogue™, Next™, and Legend™ fixtures
•Easy to read OLED display with simple, effective menu options
•Simple and complex DMX channel profiles for programming versatility
•Reset over DMX

Introduction
-4- Rogue™ R1 Wash User Manual Rev. 2
Overview
Front View
Rear View
Top View
Side View
Control Panel
Fuse
3- and 5-pin
DMX In
3- and 5-pin
DMX Out
Power In
Power Out
LED
Handle

Introduction
Rogue™ R1 Wash User Manual Rev. 2 -5-
Dimensions
3.82 in
97 mm
9.06 in
230 mm
10.43 in
265 mm
5.98 in
152 mm
7.36 in
187 mm
6.38 in
162 mm
7.80 in
198 mm
13.94 in
354 mm

Setup
-6- Rogue™ R1 Wash User Manual Rev. 2
3. SETUP
AC Power
Each Rogue™ R1 Wash has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue™ R1
Wash, refer to the label affixed to the product. You can also refer to the Technical Specifications
chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
www.chauvetprofessional.com.
•Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Rogue™ R1 Wash comes with a power input cord terminated with a Neutrik® powerCON®
A connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(F 4 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Power Linking
The Rogue™ R1 Wash supports power linking. You can power link up to 10 products at 120 V;
up to 18 at 208 V; or up to 21 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
DMX Linking
You can link the Rogue™ R1 Wash to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX-compatible products with the Rogue™ R1 Wash
, you can control each
individually with a single DMX controller.
DMX
Personalities
The Rogue™ R1 Wash uses a 3- or 5-pin DMX data connection for the 14, 15, 19 or 21-channel
DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the Rogue™ R1 Wash to work in
these personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link th
is product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.

Setup
Rogue™ R1 Wash User Manual Rev. 2 -7-
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable.
Procedure
The Rogue™ R1 Wash comes with a preinstalled mounting surface to which you will be able to
attach the included omega bracket. Make sure the clamps are capable of supporting the weight
of this product. Use at least 1 mounting point per product. In addition, use a safety cable to link
the product to the structure.
Mounting Diagram
Floor Mounting
Overhead Mounting
Omega Bracket
Mounting
Surface
Safety Cable
Mounting Clamp

Operation
-8- Rogue™ R1 Wash User Manual Rev. 2
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the
numeric value when in a function
Control Options
You can set the Rogue™ R1 Wash starting address in the 001–512 DMX range. This
enables control of up to 24 products in the 21-channel 21CH personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
•To highlight a menu option or to change a setting, press <UP> or <DOWN>.
•To change menu levels as shown in the Menu Map, press <ENTER> or <MENU>.
This is equivalent to moving right and left of the Menu Map, respectively.
•To accept the current or new value, press <ENTER>.
•To return to the previous menu without making changes, press <MENU>.
•To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
screen will automatically revert to the opening screen.

Operation
Rogue™ R1 Wash User Manual Rev. 2 -9-
Menu Map
Main Level Programming Levels Description
Address
001–512
Sets the DMX starting address
Run Mode
DMX
14CH
Selects the DMX mode
15CH
19CH
21CH
Auto Test
Runs the product’s test sequence
Manual Test
Pan
000–255 Allows manual control of all settings from the
control panel
Tilt
Dimmer
Shutter
Red
Green
Blue
White
Zoom
Setup
Pan Reverse
OFF
Reverse pan operation
ON
Normal pan operation
Tilt Reverse
OFF
Reverse tilt operation
ON
Normal tilt operation
Pan Angle
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
Tilt Angle
230
Selects the 230° tilt angle range
180
Selects the 180° tilt angle range
90
Selects the 90° tilt angle range
Fans
Auto
Selects the fan’s operation mode.
ECO
Full
Display
OFF
Determines whether or not the backlight of the
display will stay on after last command button
pressed
ON

Operation
-10- Rogue™ R1 Wash User Manual Rev. 2
Menu Map (Cont.)
Main Level Programming Levels Description
Setup
(Cont.)
Screen Rev
OFF
Rotates control screen view 180°
ON
Normal control screen view
Dimmer Curve
Linear
Liner dimmer
Square
Square curve dimmer
I Squa
Reverse square curve dimmer
SCurve
S curve dimmer
Dimmer Speed
Smooth
Slow (smooth) or fast (fast) dimmer curves
Fast
Color
calibration
Off
Max. output when RGBW DMX channels are at
full
On
Factory calibrated color temperature when
RGBW DMX channels are at full
Custom
RED
100–255 Manual calibration of color temperature when
RGBW DMX channels are at full
GREEN
BLUE
Reset
Function
Pan/Tilt
NO
Resets pan/tilt functions to the home position
YES
Zoom
NO
Resets all zoom functions to the home position
YES
All
NO
Resets all functions to the home position
YES
Factory Set
Reverts the product back to the original factory
settings
Sys Info
Ver:
Displays the software version
Running Mode:
Displays the current running mode
Dmx Address:
Displays the current DMX address
Temperature:
Displays the product’s temperature in Celsius
Fixture Time
Displays the product’s total time running

Operation
Rogue™ R1 Wash User Manual Rev. 2 -11-
Address
This programming level sets the DMX starting address.
•
Starting from the Main Level screen, select Address, press <ENTER>.
Set the
DMX Address
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
This option
sets the products DMX address.
•Change the starting address (001–512), press <ENTER>.
Run Mode
This programming level sets the DMX personality and controls the different test modes.
•Starting from the Main Level screen, select Run Mode, press <ENTER>.
DMX Personality
This option selects which DMX Personality the product uses.
1. Highlight DMX, press <ENTER>.
2. Select the DMX personality 14CH, 15CH, 19CH, or 21CH, press <ENTER>.
•See the DMX Values section for the highest starting address you can select for
each personality.
•Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
Auto Test
This option runs every attribute individually through 1 cycle.
•Highlight Auto Test, press <ENTER>.
The Auto Test will end after 1 full cycle. You can stop the test by pressing <MENU>
at any time.
Manual Test
This option allows you to run each attribute individually or as a group.
1. Highlight Manual Test, press <ENTER>.
2. Highlight the desired attribute listed on the control panel screen, press <ENTER>.
3. Set the attribute value (000–255), press <ENTER>.
4. Repeat step 2 for the other attributes.
When exiting the Manual Test level, the values of all tested channels will go back
to zero.

Operation
-12- Rogue™ R1 Wash User Manual Rev. 2
Setup
This programming level controls the product’s head movement, display, dimming, and fan
adjustments.
•Starting from the Main Level screen, select Setup, press <ENTER>.
Pan Reverse
Reverses the operation of the pan attribute.
1. Highlight Pan Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Tilt Reverse
Reverses the operation of the tilt attribute.
1. Highlight Tilt Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Pan Angle
This option assigns pan range.
1. Highlight Pan Angle, press <ENTER>.
2. Select 540, 360, or 180, press <ENTER>.
Tilt Angle
This option assigns tilt range.
1. Highlight Tilt Angle, press <ENTER>.
2. Select 90, 180, or 270, press <ENTER>.
Fans
This option allows you to choose a fan mode. AUTO mode controls the fan speed based
on the temperature of the LED’s. In ECO mode, fans will stay as quiet as possible and
allow the output of the LEDs to decrease by about 20% over time depending on the
ambient temperature. As the ambient temperature increases, the output of the LEDs will
decrease. In Full mode, the fans are on all the time at the highest speed.
1. Highlight Fans, press <ENTER>.
2. Select Auto, ECO, or Full, press <ENTER>.
Display
Determines whether or not the backlight of the display will stay on after last command
button pressed.
1. Highlight Display, press <ENTER>.
2. Select OFF or ON, press <ENTER>.
Screen Reverse
To invert the control panel screen:
1. Highlight Screen Rev, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Dimmer Curve
This option allows you to choose a dimmer curve mode. Linear mode follows the speed
of the user controlling the fader when it is brought down to a “0” value. In Square mode
the dimmer follows a square dimming curve when the fader is brought to a “0” value. In
I
Square mode the dimmer follows a square dimming curve in reverse when the fader is
brought to a “0” value. In SCurve mode,
the dimmer follows a square dimming curve
when the fader is brought to a “0” value.
1. Highlight Dimming Curve, press <ENTER>.
2. Select Linear, Square,I Square, or SCurve, press <ENTER>.
Dimmer Speed
This option sets the speed of the Dimmer Curve menu option .
1. Highlight Dimmer Speed, press <ENTER>.
2. Select Smooth or Fast, press <ENTER>.
Color Calibration
This programming level allows the user to set what each of the RGBW DMX channels do
when set to a “255” value.
•Starting from the Setup screen level, select Color calibration, press <ENTER>.
Factory calibration
This option chooses to set the color temperature calibration to Off or On. When RGBW
DMX channels are at full, setting to Off sets the fader to Max. output
on each of the
RGBW DMX Channels or to On which uses the factory calibrated color temperature.
•Highlight On or Off, press <ENTER>.
Custom Calibration
Choosing Custom allows manual calibration of the RGBW DMX Channels.
1. Highlight Custom, press <ENTER>.
2. Select RED, GREEN, or BLUE, press <ENTER>.
3. Set the color value (100–255), press <ENTER>.
4. Repeat step 2 for the other colors.

Operation
Rogue™ R1 Wash User Manual Rev. 2 -13-
Reset Function
This programming level allows the user to reset individual functions to the home position.
•
Starting from the Setup screen level, select Reset Function, press <ENTER>.
Pan/Tilt Reset
This option resets the Pan/Tilt functions to the home position.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Zoom Reset
This option resets the Zoom function to the home position.
1. Highlight Zoom, press <ENTER>.
2. Select YES or NO, press <ENTER>.
All Reset
This option resets the all the functions to the home position.
1. Highlight All, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Factory Reset
Function
This reverts the product back to its original factory settings.
•Starting from the Setup screen level, select Factory Settings, press <ENTER>.
System
Information
This programming level shows standard information regarding the product’s operating status.
•Starting from the Main Level screen, select Sys Info, press <ENTER>.
•Ver: The current software version is displayed on the screen.
•Running Mode: The current Running mode is displayed on the screen.
•DMX Address: The current DMX address is displayed on the screen.
•Temperature: The current product temperature is displayed on the screen.
•Fixture Time: The product’s total running time.
Offset Mode
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU>until the passcode screen
appears.
2. Using <UP> to increase the number value and <DOWN> to move to the next column,
enter 2323, press <ENTER>. This brings you into the Zero Adjust menu screen.
Pan
1. Highlight PAN, press <ENTER>.
2. Select 000–255, press <ENTER>.
Tilt
1. Highlight TILT, press <ENTER>.
2. Select 000–255, press <ENTER>.

Operation
-14- Rogue™ R1 Wash User Manual Rev. 2
DMX Values
21CH
Channel Function Value Percent/Setting
1
Pan
000ó255
0–100%
2
Fine Pan
000ó255
Fine control (16-bit)
3
Tilt
000ó255
0–100%
4
Fine Tilt
000ó255
Fine control (16-bit)
5
Pan/Tilt Speed
000ó255
0–100%
6
Dimmer
000ó255
0–100%
7
Fine Dimmer
000ó255
Fine control (16-bit)
8 Shutter
000
ó
019
020ó024
025ó064
065ó069
070ó084
085ó089
090ó104
105ó109
110ó124
125ó129
130ó144
145ó149
150ó164
165ó169
170ó184
185ó189
190ó204
205ó209
210ó224
225ó229
230ó244
245ó255
Closed
Open
Fast to slow
Open
Fast on/ramp off
Open
Ramp off/fast on
Open
Random
Open
Random fast on/ramp off
Open
Random slow on/fast off
Open
Pulse
Open
Random pulse
Open
Fade on/off
Open
Pulse
Open
9
Red
000ó255
0–100%
10
Fine Red
000ó255
Fine control (16-bit)
11
Green
000ó255
0–100%
12
Fine Green
000ó255
Fine control (16-bit)
13
Blue
000ó255
0–100%
14
Fine Blue
000ó255
Fine control (16-bit)
15
White
000ó255
0–100%
16
Fine White
000ó255
Fine control (16-bit)

Operation
Rogue™ R1 Wash User Manual Rev. 2 -15-
DMX Values (Cont.)
21CH
(Cont.)
Channel Function Value Percent/Setting
17 Color
000ó004
005ó009
010ó014
015ó019
020ó024
025ó029
030ó034
035ó039
040ó044
045ó049
050ó054
055ó059
060ó064
065ó069
070ó074
075ó079
080ó084
085ó089
090ó094
095ó099
100ó104
105ó109
110ó114
115ó119
120ó124
125ó129
130ó134
135ó139
140ó144
145ó149
150ó154
155ó159
160ó164
165ó169
170ó174
175ó179
180ó201
202ó207
208ó229
230ó234
235ó249
250ó255
Open
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Color 8
Color 9
Color 10
Color 11
Color 12
Color 13
Color 14
Color 15
Color 16
Color 17
Color 18
Color 19
Color 20
Color 21
Color 22
Color 23
Color 24
Color 25
Color 26
Color 27
Color 28
Color 29
Color 30
Color 31
Color 32
Color 33
Color 34
Closed
Clockwise color scroll, fast to slow
Stop on current color
Counter-clockwise color scroll, fast to slow
Closed
Color scroll
Closed
18
Zoom
000ó255
0–100%

Operation
-16- Rogue™ R1 Wash User Manual Rev. 2
DMX Values (Cont.)
21CH
(Cont.)
Channel Function Value Percent/Setting
19 Movement Macros
000ó007
008ó023
024ó039
040ó055
056ó071
072ó087
088ó103
104ó119
120ó135
136ó151
152ó167
168ó183
184ó199
200ó215
216ó231
232ó247
248ó255
No function
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Effect 6
Effect 7
Effect 8
Effect 9
Effect 10
Effect 11
Effect 12
Effect 13
Effect 14
Effect 15
Effect 16
20
Movement Macro Speed
000ó255
0–100%
21 Control
000ó009
010ó014
015ó019
020ó024
025ó029
030ó034
035ó039
040ó044
045ó049
050ó054
055ó059
060ó064
065ó069
070ó074
075ó079
080ó084
085ó089
090ó094
095ó099
100ó104
105ó109
110ó114
115ó119
120ó124
125ó129
130ó134
135ó139
140ó144
145ó255
No function
Blackout during pan/tilt (5 s activation delay)
No function
No function
No function
No function
No function
No function
No function
Pan reset (5 s activation delay)
Tilt reset (5 s activation delay)
Zoom reset (5 s activation delay)
No function
All reset (5 s activation delay)
No function
Pan/Tilt movement
reverse (5 s activation delay)
Pan movement reverse (5 s activation delay)
Tilt movement reverse (5 s activation delay)
Disable Pan movement
reverse (5 s activation delay)
Disable Tilt movement
reverse (5 s activation delay)
Disable Pan/Tilt movement
reverse (5 s activation delay)
No function
No function
Eco fan (5 s activation delay)
Full fan (5 s activation delay)
Auto fan (5 s activation delay)
Fast dimmer curve (5 s activation delay)
Smooth dimmer curve (5 s activation delay)
No function