Chauvin Arnoux F07 User manual

CLAMP-ON MULTIMETER F07
ENGLISH User Manual
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Statement of Compliance
Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments
certifies that this instrument has been calibrated
using standards and instruments traceable to
international standards.
We guarantee that at the time of shipping your
instrument has met its published specifications.
An NIST traceable certificate may be
requested at the time of purchase, or obtained
by returning the instrument to our repair and
calibration facility, for a nominal charge.
The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair
and calibration section at www.aemc.com.
Serial #: ________________________________
Catalog #: 2129.54
Model #: F07
Please fill in the appropriate date as indicated:
Date Received: _________________________________
Date Calibration Due: _______________________
Chauvin Arnoux®, Inc.
d.b.a AEMC®Instruments
www.aemc.com
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Table of Contents
1. INTRODUCTION............................................................................... 4
1.1 International Electrical Symbols................................................4
1.2 DenitionofMeasurementCategories .....................................5
1.3 ReceivingYourShipment..........................................................5
1.4 OrderingInformation.................................................................5
1.4.1 AccessoriesandReplacementParts............................5
2. PRODUCT FEATURES ...................................................................... 6
2.1 Description................................................................................6
2.2 ModelF07Callouts...................................................................7
2.3 RotarySwitchFunctions ...........................................................8
2.4 CommandButtons ....................................................................8
2.5 HoldButtonPrimaryFunctions .................................................8
2.5.1 DisplayLock .................................................................8
2.5.2 PreselectingMIN/MAXMode.......................................8
2.5.3 AutomaticCompensationforLeadResistance............9
2.5.4 AutomaticCompensationofCurrentMeasurement
Zero .............................................................................9
2.6 HoldButtonSecondaryFunctions(withrotaryswitch) ..................9
2.6.1 DisableAuto-offFunction.............................................9
2.6.2 ActivateTheV-liveFunction ......................................10
2.6.3 DisplayingTheInternalSoftwareVersion..................10
2.7 YellowButtonPrimaryFunctions ............................................10
2.7.1 ManualSelectionofAC/DCMode .............................10
2.7.2 PossibleSelectionsinContinuityFunction ................ 11
2.7.3 SelectionOfInrushFunction .....................................11
2.7.4 Setting(°C/°F)WhenMeasuringTemperature........... 11
2.8 YellowButtonSecondaryFunctions(withrotaryswitch) .............11
2.8.1 ModicationofAudioIndicationThresholdin
 ContinuityTest ...........................................................11
2.8.2 Selecting°Cor°FastheDefaultSetting....................12
2.8.3 ProgrammingtheScaleFactorofAdapterFunction...12
2.8.3 DefaultConguration ..................................................12
2.9 MIN/MAXButtonPrimaryFunctions .......................................13
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

2.10HzButton ................................................................................13
2.11 Button...............................................................................13
2.12LiquidCrystalDisplay .............................................................14
2.12.1 DigitalDisplay .............................................................14
2.12.2 SymbolDisplay ...........................................................14
2.13Buzzer.....................................................................................15
3. SPECIFICATIONS........................................................................... 16
3.1 Electrical .................................................................................16
3.1.1 Voltage( ) ..............................................................16
3.1.2 Continuity().......................................... 17
3.1.3 Resistance (Ω)............................................................17
3.1.4 Semi-ConductorTest( ) ..........................................17
3.1.5 Current( ) ..............................................................18
3.1.6 INRUSHFunction .......................................................18
3.1.7 Frequency(Hz) ...........................................................18
3.1.8 Temperature(T°).........................................................19
3.1.9 AdapterFunction( ) ..........................................19
3.1.10 PowerSupply..............................................................20
3.2 Mechanical..............................................................................20
3.3 Environmental.........................................................................20
3.4 Safety......................................................................................21
3.5 VariationsinOperatingRange................................................22
3.6 TypicalFrequencyResponseCurves .....................................23
4. OPERATION .................................................................................. 24
4.1 VoltageMeasurement-( ).................................................24
4.2 AudioContinuityTest- ( ) .................................... 24
4.2.1 LeadResistanceCompensation(Ωzero)...................25
4.3 ResistanceMeasurement-(Ω)...............................................25
4.4 Semi-ConductorTest- ( )....................................................25
4.5 CurrentMeasurements-()...............................................26
4.5.1 CorrectionoftheCurrentMeasurementZero
 (DCZero)....................................................................26
4.6 INRUSHFunction ...................................................................26
4.6.1 Implementation ...........................................................27
4.7 FrequencyMeasurement-(Hz)..............................................27
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

4.8 TemperatureMeasurement-(T°) ...........................................27
4.8.1 WithoutaSensor ........................................................27
4.8.2 WithaSensor .............................................................27
4.9 AdapterMeasurement-( )..............................................28
4.9.1 Scale Factor Selection................................................28
4.9.2 ScaleFactorProgramming .........................................29
4.9.3 Implementation ...........................................................29
5. MAINTENANCE ............................................................................. 30
5.1 ChangingtheBattery ..............................................................30
5.2 Cleaning..................................................................................30
5.3 Storage ...................................................................................30
RepairandCalibration...........................................................................31
TechnicalandSalesAssistance ............................................................31
LimitedWarranty ...................................................................................32
WarrantyRepairs...................................................................................32
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

4 Clamp-on Multimeter Model F07
CHAPTER 1
INTRODUCTION
WARNING
• Never use on circuits with a voltage higher than 600V and an
overvoltagecategoryhigherthanCat.III.
• UseininsideenvironmentswithPollutionDegree2;Temperature
0°Cto+50°C;70%RH.
• Only use accessories compliant with safety standards
(NFEN61010-2-031)600VminandovervoltageCat.III.
• Neveropentheclampbeforedisconnectingallpowersources.
• Neverconnect tothe circuitto bemeasured ifthe clampis not
properlyclosed.
• Before any measurement, check the proper positioning of the
cablesandswitch.
• Whenmeasuringcurrent,checkforproperalignmentofthecon-
ductorinrelationtothemarkersandproperclosingofthejaws.
• Always disconnect the clamp from any power source before
changingthebattery.
• Donotperformresistancetests,continuitytestsorsemi-conduc-
tortestsonacircuitunderpower.
1.1 International Electrical Symbols
This symbol signifies that the instrument is protected by double or reinforced
insulation.
This symbol on the instrument indicates a WARNING and that the operator must refer
to the user manual for instructions before operating the instrument. In this manual,
the symbol preceding instructions indicates that if the instructions are not followed,
bodily injury, installation/sample and product damage may result.
Risk of electric shock. The voltage at the parts marked with this symbol may be
dangerous.
This symbol refers to a type A current sensor. This symbol signifies that application
around and removal from HAZARDOUS LIVE conductors is permitted.
In conformity with WEEE 2002/96/EC
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 5
1.2 Definition of Measurement Categories
Cat. I: Formeasurementsoncircuits not directlyconnectedto theAC
supply wall outlet such as protected secondaries, signal level,
andlimitedenergycircuits.
Cat. II: For measurements performed on circuits directly connected to
the electrical distribution system. Examples are measurements
onhouseholdappliancesorportabletools.
Cat. III: For measurements performed in the building installation at
the distribution level such as on hardwired equipment in xed
installationandcircuitbreakers.
Cat. IV: For measurements performed at the primary electrical supply
(<1000V) such as on primary overcurrent protection devices,
ripplecontrolunits,ormeters.
1.3 Receiving Your Shipment
Uponreceivingyourshipment,makesurethatthecontentsareconsistent
withthepackinglist.Notifyyourdistributorofanymissingitems.Iftheequip-
mentappearstobedamaged,leaclaimimmediatelywiththecarrierand
notifyyourdistributoratonce,givingadetaileddescriptionofanydamage.
Savethedamagedpackingcontainertosubstantiateyourclaim.
1.4 Ordering Information
Clamp-on Multimeter Model F07 ......................................Cat. #2129.54
Includes multimeter, 2 cables with probe tips, 1 K-type thermocouple adapter, 9V battery, soft
carrying case and this user manual.
1.4.1 Accessories and Replacement Parts
Replacementsetofleads,redandblackwithprobetips .... Cat. #2118.92
SoftCarryingPouchforClamp-onMultimeters................... Cat. #2118.65
Always use accessories adapted to the voltage and overvoltage
category of the circuit to be measured (per NF EN 61010).
Order Accessories and Replacement Parts Directly Online
Check our Storefront at www.aemc.com for availability
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

6 Clamp-on Multimeter Model F07
CHAPTER 2
PRODUCT FEATURES
2.1 Description
TheClamp-onMultimeterModelF07emphasizesreliabilityandsimplicity
ofusetorespondtotheneedsofpowerprofessionals.
Features:
 TRMSmeasurement
 Acompactunit,integratingthecurrentsensorforinten-
sitymeasurementswithoutbreakingthetestcircuit
 Outstandingergonomicfeatures:
●  automaticselectionofACorDCmeasurement
●  measurementoftheRMSvalueofanysignal
(AC+DC)
●  automaticselectionofmeasurementranges
●  programmableaudiovoltageindication(V-Live)
●  “over-range”indication
●  backlightingofthedigitaldisplay
●  powerauto-off
●  MIN-MAX-PEAKvaluerecordingfunction
●  correctionofdifferencesinDCmeasurement
(DCzero)
●  automaticcompensationofmeasurementlead
resistance (Ωzero)
 Compliance with IEC electrical safety standards and
CEmarkings
 Lightandruggedconstructionforelduse
 “INRUSH”function,formeasurementofmotorstarting
currents
 “Adapter”function,withdirectreadingviascalefactor
programming.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 7
2.2 Model F07 Callouts
1
2
3
4
Jaws  CommandButtons

6-wayRotarySwitch LiquidCrystalDisplay
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

8 Clamp-on Multimeter Model F07
2.3 Rotary Switch Functions
OFF Deactivationoftheclamp,activationisensuredby
  selectionofotherfunctions
 MeasurementofDCandACvoltages(rmsvalue)
Continuitymeasurement.Resistanceandsemi-conductor
  measurementsmadebypressingtheyellowbutton.
 MeasurementofDCandACamperes(rmsvalue)
T° Measurementoftheinternalorexternaltemperature,accord-
  ingtothepresenceorabsenceofasensor,in°Cor°F
 Selectionof“Adapter”function
2.4 Command Buttons
Thebuttonsarecapableof3typesofaction:
Short pressure: <1.3s,validifthebuttonpressureisdetected.
Long pressure: >1.3s,givesaccesstoameasurementoroperating
mode.Holdingorreleasingthebuttonhasnoeffect.
Held pressure: Givesaccesstoameasurementoroperatingmode
andremainsinthismodeaslongaspressureisheld.Releasingthe
buttonreturnsyoutothepreviousmode.
2.5 Hold Button Primary Functions
2.5.1 Display Lock
Short-press the HOLD button to freeze/lock the display. Press
againtounlock.
2.5.2 Preselecting MIN/MAX Mode
Short-presstheHOLDbutton,thentheMIN/MAXbuttontoprese-
lecttheMIN/MAXmode.PresstheHOLDbuttonagaintomake
theMIN/MAXmodeeffective.
Use this function to preselect the MIN/MAX mode to prevent
unwantedormistakenintegrationofMIN/MAXvalues.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 9
2.5.3 Automatic Compensation for Lead Resistance
PresstheHOLDbuttonwhenthecontinuitytest( )ormeasure-
mentresistancefunction(Ω)isselected.
When the button is released and the display shows zero, the
correction value is put into memory.
If the value measured is higher than 2Ω,thiscorrectionisstopped
andthevalueinmemoryisresettozero.
NOTE: ThiscorrectionisprohibitedinMIN/MAXmode.
2.5.4 Automatic Compensation of Current Measurement Zero
PresstheHOLDbuttonwhenthecurrentmeasurementfunction
()isselected.
When the button is released and the display shows zero, the cor-
rection value is put into memory.
If the value measured is higher than 6A,thiscorrectionisstopped
andthevalueinmemoryisresettozero.
2.6 Hold Button Secondary Functions (with rotary switch)
2.6.1 Disable Auto-off Function
WhilepressingdowntheHOLDbutton,turntherotaryswitchfrom
theOFFpositiontothe position.
The unit emits a double beep, then the symbol ashes.
Theselectedcongurationisputintomemorywhenthebuttonis
released(the symbolremainslitcontinuously).
AutomaticstopisreactivatedwhenswitchreturnstoOFF position.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

10 Clamp-on Multimeter Model F07
2.6.2 Activate The V-live Function
While pressing down the HOLD button, bring the rotary switch
fromtheOFF positiontothe position.
The unit emits a double beep, then the Vand symbol ashes.
The selected conguration is put into memory when the button
is released (the V symbol becomes xed and the symbol
ashes).
ProceedinthesamewaytodeactivatetheV-Livefunction(the
symboldisappearswhenthebuttonisreleased).
2.6.3 Displaying The Internal Software Version
While pressing down the HOLD button, bring the rotary switch
fromtheOFFpositiontotheAposition.
The unit beeps, the software version is displayed in the form
UX.XX for 2 seconds, then all the segments of the display are
shown.
2.7 Yellow Button Primary Functions
2.7.1 Manual Selection of AC/DC Mode
Bydefault,theclampswitchestoACorDCmodeautomatically
(AC/DCsymbolashes)fortheAandVfunctions.Whenthemode
ismanuallyselected,theAC/DCsymbolisxed.
Useaseriesofshortpressesontheyellow buttontomanually
selectAC/DCmeasurement,andtoreturntoautomaticmode.
NOTE: Manual selection is not possible in MIN/MAX or HOLD
mode,TheselectionofAC+DCmodefortheadapterfunctionisnot
possibleeither.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 11
2.7.2 Possible Selections in Continuity Function
Bydefault,theclampisinthecontinuityfunction( ).
Toselectresistancemeasurement(Ω),semi-conductortestfunc-
tion ( ),andtoreturntothecontinuityfunction( ),perform a
series of short presses on the yellow button.
2.7.3 Selection Of Inrush Function
ThisisdoneinfunctionA(AC)byrstpressingontheMIN/MAX
button,thenontheyellow button.
Consultationofthevaluescorrespondingtothisfunctionispossible
bypressingrst onthe HOLDbutton, then byshort successive
pressesontheyellow button.
To quit this function, perform short presses on the MIN/MAX
button.
2.7.4 Setting (°C/°F) When Measuring Temperature
Short-presstheyellow buttontoselect°Cor°F.Theselection
madewillnotbesavedwhentheclampisturnedoff.
2.8 Yellow Button Secondary Functions (with rotary switch)
2.8.1 Modification of Audio Indication Threshold in Continuity Test
Whilepressingdowntheyellow button,bringtherotaryswitch
fromtheOFFpositiontothe position.
The unit beeps, the Ωand symbols appear, along with the
threshold value (40.0 by default).
Adjustmentisthenpossiblefrom1Ωto 40Ωbypressingtheyellow
button(shortpressure:progressionof1Ωby 1Ω;pressandhold:
progressionof10Ωby 10Ω).
Once the value is chosen, activate the rotary switch to memo-
rize.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

12 Clamp-on Multimeter Model F07
2.8.2 Selecting °C or °F as the Default Setting
To set either °C or °F as the default,presstheyellow button
downandturntherotaryswitchtotheT°position.
The instrument beeps twice, then the T° symbol lights up and the
°F symbol ashes if the instrument was previously in °C or the °C
symbol ashes if the was in °F.
Theconguationchosenissavedwhenthekeyisreleased.
2.8.3 Programming the Scale Factor of Adapter Function
Whilepressingdowntheyellow button,bringtherotaryswitch
fromtheOFFpositiontothe position.
The unit beeps, and the scale factor value is displayed (1 per
defualt).
Adjustment of the scale factor is then possible by successive
pressesontheyellow buttonof1m(0.001)to100k(100,000).
Once the value is chosen, activate the rotary switch to memo-
rize.
2.8.3 Default Configuration
While pressing down the yellow button, turn the rotary switch
fromtheOFFpositionto position.
The unit emits a double beep, then all the segments of the digital
display and the symbol ashes.
Thedefaultcongurationissetwhenthebuttonisreleased(the
displaynolongerashesandthe symboldisappears).
The default conguration is:
• Audioidenticationthreshold:40Ω
• Auto-off:ON
• V-Livefunction:none
• Scalefactorinadapterfunction:1
• Unitfortemperaturemeasurement:notcontrolled
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 13
2.9 MIN/MAX Button Primary Functions
MIN/MAXoperatesbyend-aroundshiftonshortpressure:
MIN/MAX V and A Functions Other functions
1stpress PEAKvalue MAXvalue
2ndpress MAXvalue MINvalue
3rdpress MINvalue ReturntoMAXvalue
4thpress ReturntoPEAKvalue –
AlongpressonthebuttonwillquittheMIN/MAXmode.
NOTE:InMIN/MAXmode,theAuto-offfunctionoftheunitisunavail-
able ( symbollit).
2.10 Hz Button
A short press displays the frequency of the measured signal,
anotherpressswitchesbacktothepreviousvalue.
ThisbuttonisactiveonlyfortheAAC,VACfunctions.
2.11 Button
Short pressure:Displaybacklightcommand.
Automaticshutdownafter2minutes.
Held pressure: Display of estimated remaining battery power, in hours
(exceptINRUSHandphaseorderfunctions).
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

14 Clamp-on Multimeter Model F07
2.12 Liquid Crystal Display
The liquid crystal display includes the digital display of the measured
values,therelatedunitsandsymbols.
2.12.1 Digital Display
4digits,9999counts,3decimalpoints,+and-signs(DCandpeakmea-
surement)
+ OL : Positivevaluerangeexceedance(>3999cts)
- OL : Negativevaluerangeexceedance
OL : Unsignedvaluerangeexceedance
- - - - : Indeterminatevalue(middlesegments)
2.12.2 Symbol Display
Flashing:powerlimitedtoapproximately1hour
Steady:batterydrained,operationandaccuracyareno
  longerguaranteed
 Constantoperation(noautomaticshutdown)
 ONsteadywhentheINRUSHfunctionisselected
Fixed:Continuitymeasurement
Flashing:V-Livefunctionselected
 HOLDFunctionactive
PEAK ONinVandAinMIN/MAXmodeifthemeasurementof
  thepeakvalueisselected
MAX IndicatesthedisplayofamaximumvalueinMIN/MAXmode
MIN IndicatesthedisplayofaminimumvalueinMIN/MAXmode
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 15
AC Fixed:measurementinACmanualmode
Flashing:measurementinACautomaticmode
DC Fixed:measurementinDCmanualmode
Flashing:measurementinDCautomaticmode
AC+DC MeasurementinACandDCmanualmode
T° Temperaturemeasurement
INT Measurementoftemperaturewhentheterminalsarenot
  connected,orthethermocoupleconnectedisfaulty.
EXT Measurementoftemperaturewhenthethermocoupleis
connected
 Semi-conductortestonpositionΩ
m Scalefactor<1inadapterfunction
k Scalefactor>1000inadapterfunction
2.13 Buzzer
Differenttonesareemittedaccordingtothefunctiongiventothebuzzer:
• Short and medium sound:validbutton
• Short and high-pitched sound:prohibitedbutton
• Short and low-pitched sound:exitMIN/MAXmode
• 2 short, high-pitched sounds:validationofaconguration
parameter
• Short and medium sound every 400 ms:voltagemeasuredis
higherthantheunit’sguaranteedsafetyvoltage
• 5 short and medium recurring sounds:automaticshutdownof
theinstrument
• Continuous medium sound: measured continuity value lower
thanprogrammedthreshold,short-circuitconnectionduringsemi-
conductortest
• Modulated medium continuous sound: value measured in
volts,higherthan45VpeakwhentheV-Livefunctionisselected
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

16 Clamp-on Multimeter Model F07
CHAPTER 3
SPECIFICATIONS
Reference Conditions: 23°C ±3°K; RH of 45 to 75%; battery power at 8.5V ± 5V; frequency
range of applied AC signal 45 to 65Hz; position of conductor centered in clamp jaws;
conductor diameter .20"; no electrical eld; no external AC magnetic eld.
3.1 Electrical
3.1.1 Voltage ( )
Range 40V 400V 600V*
MeasuringRange** 0.2Vto39.99V 40.0Vto399.9V 400to600V
400to900Vpeak
Accuracy 1%ofReading
+5cts
1%ofReading
+2cts
1%ofReading
+2cts
Resolution 10mV 0.1V 1V
InputImpedance 1MΩ
Overload Protection 600VAC/DC
*In DC, the display indicates +OL above +600V and -OL above -600V (900V in PEAK mode).
In AC, the display indicates OL over 600Vrms (900V in PEAK mode).
**In AC if the value of the voltage measured is <0.15V the display indicates 0.00.
MIN/MAX Mode:
Accuracy:sameasprevioustable+0.2%ofReading
CaptureTime:100mstypical
PEAK Mode:
Accuracy:sameasprevioustable+2%ofReading
CaptureTime:500µstypical(2.5msmax)
Detection Threshold Accuracy (V-Live Mode):
45Vpeak±2V
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

Clamp-on Multimeter Model F07 17
3.1.2 Continuity ( )
Range 400Ω
MeasuringRange 0.0 to 399.9Ω
Accuracy* 1%ofReading+2cts
Resolution 0.1Ω
OpenCircuitVoltage ≤3.2V
MeasuringCurrent 320µA
Overload Protection 500VACor750VDCorpeak
*with compensation for measurement lead resistance
MIN/MAX Mode:
Accuracy:sameasprevioustable+0.2%ofReading
CaptureTime:100mstypical
3.1.3 Resistance (Ω)
Range 400Ω4000Ω40kΩ
MeasuringRange 0.0 to 399.9Ω400 to 3999Ω4.00kΩto39.99kΩ
Accuracy* 1%ofReading+2cts
Resolution 0.1Ω1Ω10Ω
OpenCircuitVoltage ≤3.2V
MeasuringCurrent 320µA 40µA
Overload Protection 500VACor750VDCorpeak
*With compensation for measurement lead resistance
MIN/MAX Mode:
Accuracy:sameasprevioustable+0.2%ofReading
CaptureTime:100mstypical
3.1.4 Semi-Conductor Test ( )
Display Range 4V
MeasuringRange 0to3.199V
Accuracy 1%ofReading+2cts
Resolution 1mV
MeasuringCurrent* 2mA to 4mA
Overload Protection 500VACor750VDCorpeak
*Per the voltage measured
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]

18 Clamp-on Multimeter Model F07
MIN/MAX Mode:
Accuracy:sameasprevioustable+0.2%ofReading
CaptureTime:100mstypical
3.1.5 Current ( )
Display Range 40A 400A 600A*
MeasuringRange** 0.20 to 39.99A 40.0 to 399.9A 400to600Apeak
Accuracy*** 1.5%ofReading+10cts 1.5%ofReading+2cts
Resolution 10mA 100mA 1A
*In DC, the display indicates +OL above +400A and -OL above -400A (600A in PEAK mode).
In AC, the display indicates OL over 400Arms (900V in PEAK mode).
**In AC, if the value of the current measured is <0.15A, the display shows 0.00.
***With correction of zero in DC
MIN/MAX Mode:
Accuracy:sameasprevioustable+0.2%ofReading
CaptureTime:100mstypical
PEAK Mode:
Accuracy:sameasprevioustable+0.2%ofReading+0.5A
CaptureTime:500µstypical(2.5msmax)
3.1.6 INRUSH Function
Range for Use: ≥5Apeakfortherstperiodofthesignal
Accuracy:5%+0.5A
Capture Time: 10periodsofthesignalfrequency(200msat50Hz)
3.1.7 Frequency (Hz)
Display Range 40Hz 400Hz 4000Hz 40kHz
Measuring
Range*
10.00 to
39.99Hz
40.0 to
399.9Hz
400 to
3999Hz
4.00kHzto
19.99kHz
Accuracy 0.4%ofReading+1ct
Resolution 0.01Hz 0.1Hz 1Hz 10Hz
Triggering
Threshold** 5Vor10A
*Below 5Hz, the display shows 0.0
**Below the triggering threshold, the display shows an indeterminate value (- - - -). In AC +DC mode, the
triggering threshold corresponds to the AC component (AC) of the signal.
www.GlobalTestSupply.com
Quality AEMC Products Online at: [e-mail]