Chemtronics CircuitWorks CW8400 Instruction Manual

PRODUCT DESCRIPTION
CircuitWorksLead-Free Flux Dispensing
Pen is designed specifically for lead-free
soldering. The convenient pen applies flux
where it’s needed with precision control. The
Lead-Free Flux Dispensing Pen quickly
applies a noncorrosive, halide-free, No Clean
flux which meets Bellcore TR-NWT-000078
and passes IPC SF-818 for surface insulation
resistance. Instant wetting action provides
thorough deoxidation of metallic surfaces
providing the best possible surfaces for lead-
free soldering.
Pen dispenser provides controlled and
exact application
Minimizes excess flux on the board
Completely portable package
Flux is noncorrosive and halide-free
Can be used for soldering with lead-free or
Tin/Lead solders
Excellent material compatibility
Fast drying
RoHS compliant
TYPICAL APPLICATIONS
CircuitWorksLead-Free Flux Dispensing
Pen precisely dispenses flux on:
Printed Circuit Boards
Chip Carriers
Surface Mount Device Pads
Switches and Sockets
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Lead-Free Flux Dispensing Pen – CW8400
Flux Type No Clean Flux
ROL0
Flash Point (TCC) 63 °F (17 °C)
Vapor Density (air=1) > 1
Appearance Clear Liquid
Odor Alcohol
Shelflife 2 years
RoHS Compliant
COMPATIBILITY
CircuitWorksLead-Free Flux Dispensing
Pen is generally compatible with most
materials used in the electronics industry. As
with any cleaning agent, material
compatibility should be determined on a non-
critical area prior to use.
CHEMTRONICS
Technical Data Sheet TDS # CW8400
CircuitWorks

Lead-Free Flux Dispensing Pens

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Hold pen vertically and briefly depress tip to
start liquid flow. Rub pen tip on surface to be
fluxed. After soldering, wipe area around
soldered joint using a ControlWipeto
remove unreacted flux.
No Clean flux residues are designed to be left
on the board, however, they can be easily
removed with Chemtronics Flux-OffLead-
Free Flux Remover or CircuitWorksLead-
Free Flux Remover Pen (CW9400).
AVAILABILITY
CW8400 9 gm (0.32 oz)
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to answer
your technical and application related questions. The
toll free number is: 1-800-TECH-401.
NOTE: This information is believed to be accurate.
It is intended for professional end users having the
skills to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888REV. C (08/13)
Chemtronics, Flux-Off®, and CircuitWorksare registered
trademarks of Chemtronics. All rights reserved. ControlWipe
is a trademark of Chemtronics. All rights reserved.
DISTRIBUTED BY:

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Chemtronics:
CW8400