Chenbro 80H10220919A0 User manual

1
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
CHENBRO
Server Chassis
4-Ports SATA III Backplane
User’s Manual
80H10220919A0
Dec / 03 / 2013

2
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Copyright
Copyright © 2010 Chenbro Micom Co., Ltd. All rights reserved.
Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights
reserved. No part of this manual, either text or image may be used for any purpose other than internal use within
purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or
otherwise, for reasons other than internal use, is strictly prohibited without prior written permission.
Chenbro Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in this
manual at any time. Specifications are therefore subject to change without prior notice.
Information provided in this manual is intended to be accurate and reliable. However, Chenbro Micom Co., Ltd.,
assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from
its use.
Technical Support
Chenbro works hard to offer our customers maximum performance from our chassis. But in case you have
any problem with our product you can find supports from the following resources.
Web Support
Detail information of our products is in our website. You can find technical updates, installation guides, FAQs,
technical specifications and more. Our web address is: www.chenbro.com.
Email Support
You can also fill out the technical support form at our Technical Support page. You technical issue inquiries will be
sent directly to our support professionals.
Phone Support
You can also contact Chenbro HQ or branch office for immediate support; contact Information is as
following:
Chenbro HQ Chenbro Europe B.V. Chenbro Micom (USA) Inc
Tel: [phone] Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone] Fax : [phone]

3
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Contents
Copyright…………………………………………………………………………………………….........2
Technical Support……………………………………………………..…………………………………2
Revision History………………………………………………………………………………………….4
Hardware Specification………………………………………………………………………………… 5
Accommodated Chassis………………………………………………………………………………..5
Backplane Photos………………………………………………………………………………………..6
Backplane Layout………………………………………………………………………………………..7
Backplane wiring……………………………………………………………………………………….11

4
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Revision History
Date
Modifications
Sep / 15 / 2010
First release
Dec / 03 / 2013
Add CN06 SGPIO Pin Assignment

5
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Hardware Specification
Specification
Host Interface
SATAIII
HDD Interface
SATA / SAS
Hot-Swap
Yes, allows user to on line replace Hard Disk Drive
Display
LED indicates Hard Disk Drive status ( Defined by Chenbro )
Power LED –Blue ( When HDD is present )
Access LED –Green ( When HDD is busy )
Error LED –Red ( When HDD is fail )
Cooling
3pin Fan connector x2
Connectors
1. SATA III x 4
2. SAS 29pin x 4 ( for HDD )
3. Standard 4pin Power connector x 2 for +5V, +12V from power supply
4. PSU alarm
5. SGPIO
Dimension
114.8 ( Length ) x 107.8 ( Width ) x 2.4 ( Thickness ) mm
Accommodated Chassis
SR105 / SR107 / SR108 / SR209

6
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Backplane photos
Front side
Rear side

7
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Backplane Layout
Front view ( HDD slot IN )
1. [CN11 / CN21 / CN31 / CN41]: connect to 29pin SAS or 22pin SATA II HDD
2. [LD11 / LD21 / LD31 / LD41]: Blue LED indicate HDD Power,
3. [LD12 / LD22 / LD32 / LD 42]: Green LED indicate HDD activity, Red LED indicate HDD failure.

8
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Rear View ( Host Connectors IN )
4. [CN12 / CN22 / CN32 / CN42]: connect to 7pin SATA II host
5. [JF1 / JF2]: 3P3C Fan connector
J14
J15
Pin1
Pin1

9
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
6. [JP1]: Power failure signal ( To Redundant Power Supply )
7. [JM1]: Power Failure Alarm Mute ( To Redundant Power Supply )
8. [F0104]: Discrete HDD Fail LED Signal Input connector ( From RAID Card )
9. [CN01 / CN02]: standard big 4pin power connector
10. [CN08]: Fan / Power / Temperature Fail LED output connector ( To Front Panel LED Display )
HDD4
HDD3
HDD2
HDD1
Pin1
Pin1
Pin1
Pin1
Pin6

10
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
11. [SW1]: Fan & Temperature setting
12. [CN04]: SGPIO HDD access function jumper
[CN05]: SGPIO HDD fail function jumper
13. [CN06]: External HDD Activity LED Signal Input connector (from RAID Card)
SGPIO SIGNAL CONNECTOR (CN06)
CN05
CN04
SGPIO
Pin B8 Signal
Close
Close
Enable HDD failure and activity signal via SGPIO
Low
Close
Open
Enable HDD failure signal via SGPIO (Default)
Low
Open
Close
Enable HDD activity signal via SGPIO
Low
Open
Open
Disable HDD failure and activity signal via SGPIO
High
Pin
NO.
Descriptions
Pin
NO.
Descriptions
1
SGPIO DATA INPUT
2
NC
3
SGPIO DATA OUTPUT
4
GND
5
GND
6
SGPIO LOAD
7
CONTROL TYPE
8
SGPIO CLOCK
9
NC
10
KEY PIN

11
4-Port SATA III Backplane 80H10220919A0 User’s Manual
15F., No.150, Jian 1st Rd.,Zhonghe Dist.,New Taipei City, Taiwan( R.O.C.)
Tel: [phone] Fax: [phone] Email: [email protected]
w w w . c h e n b r o . c o m
Backplane Wiring
SATA 7pin Cable
Fan cable
standard big 4pin power
HDD Fail LED Signal Input
Fan / Power / Temperature Fail LED output
Power failure input
Power Failure Alarm Mute Output
External HDD Activity LED Signal Input
To Fan
To M/B
To M/B
To M/B
To front Bezel
To RAID card
To R/PSU
To M/B
SGPIO connector