Chicago Pneumatic CP2036 series User manual

Operator’s Manual
CP2036, CP2037, CP2041, CP2042 series
Impact Screwdrivers
To reduce risk of injury, everyone using, installing, repairing,
maintaining, changing accessories on, or working near this tool
must read and understand these instructions before performing
any such task.
WARNING

查询本地联系单位。
www.cp.com
www.cp.com
LOCAL SALES AND SERVICE LOCATIONS
Please find your local contact at:
Busque su contacto local en:
Votre contact local sur :
Per trovare il contatto CP nella vostra zona,
visitate:
Du kan hitta din lokala kontakt på: www.cp.com
Ihren Ansprechpartner finden Sie auch unter:
www.cp.com
www.cp.com
www.cp.com
www.cp.com
www.cp.com
Por favor, encontre o seu distribuidor local em:
www.cp.com
Du kan finne din lokale kontakt på:
U kunt uw plaatselijke contact vinden op:
www.cp.com
www.cp.com
www.cp.com
Find din lokale kontakt på:
Katso pa kallisia yhteystietoja osoitteesta:
www.cp.com
Информация, необходимая для связи с
местным представителем компании, может
быть найдена на следующем веб-сайте:
www.cp.com
请上网站www.cp.com
Παρακαλούμε βρείτε τον τοπικό σας αντιπρόσωπο
στη διεύθυνση:
A helyi elérhetőségek megtalálhatók itt:
www.cp.com
EN
ES
FR
IT
SV
DE
PT
NN
NL
DA
FI
RU
EL
ZH
HU
Lūdzu, atrodiet vietējās kontaktpersonas:
www.cp.com
Najbliższą placówkę można znaleźć po adresem:
www.cp.com
Svůj místní kontakt laskavě vyhledejte na adrese:
www.cp.com
Prosím, vyhľadajte svoj miestny kontakt na
adrese:
Prosimo, najdite svoj lokalni kontakt na:
www.cp.com
Vietinį kontaktą rasite svetainėje:
最寄りの連絡先については、当社ウェブサイトを
ご覧ください： www.cp.com
www.cp.com
www.cp.com
За контакт с местен представител, моля,
посетете:
Svojega lokalnog predstavnika pronađite na:
www.cp.com
Puteţi găsi informaţiile reprezentantului autorizat
local din regiunea dumneavoastră la:
Yerel temsilcinizi şu adresden bulabilirsiniz:
www.cp.com
www.cp.com
귀하 지역의 대리점은 다음 사이트에서 찾으실 수
있습니다: www.cp.com
LV
PL
CS
SK
SL
LT
JA
BG
HR
RO
TR
KO
2050503283 rev 03
08 2011

CP2036, CP2037, CP2041, CP2042 Series
Impact screwdriver
Original Instructions
Copyright 2011, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the
contentsorpartthereofisprohibited.Thisappliesinparticularto
trademarks,modeldenominations, partnumbersand drawings.
Use only authorized parts. Any damage or malfunction caused
by the use of unauthorized parts is not covered by Warranty or
Product Liability.
MANUFACTURER’S LIMITED WARRANTY
Limited Warranty: The “Products” of the Chicago Pneumatic Tool
Co. LLC (“CP”) are warranted to be free from defects in material and
workmanship for one year from the date of purchase. This Warranty
applies only to Products purchased new from CP or its authorized dealers.
Of course, this Warranty does not apply to products which have been
abused, misused, modied, or repaired by someone other than CP or its
Authorized Service Representatives. If a CP Product proves defective in
material or workmanship within one year after purchase, return it to any
CP Factory Service Center or Authorized Service Center for CP tools,
transportation prepaid, enclosing your name and address, adequate
proof of date of purchase, and a short description of the defect. CP will,
at its option, repair or replace defective Products free of charge. Repairs
or replacements are warranted as described above for the remainder of
the original warranty period. CP’s sole liability and your exclusive remedy
under this Warranty is limited to repair or replacement of the defective
Product. (There Are No Other Warranties Expressed Or Implied And
CP Shall Not Be Liable For Incidental, Consequential, Or Special
Damages, Or Any Other Damages, Costs Or Expenses Excepting
Only The Cost Or Expense Of Repair Or Replacement As Described
Above.)
English
EN
Noise & Vibration Declaration
Sound pressure level CP2036 : 83 dB(A), CP2037 : 88 dB(A),
CP2041 : 88 dB(A), CP2042 : 88 dB(A), uncertainty 3 dB(A),
in accordance with EN ISO 15744. For sound power, add 11
dB(A).
Vibration value:
CP2036, CP2037 less than 2.5 m/s²
CP2041 : 3.1 m/s² uncertainty 1.3 m/s²
CP2042 : 6.6 m/s² uncertainty 3.3 m/s², re. ISO 28927-2.
Declaration of noise and vibration emission
All values are current as of the date of this publication. For the
latest information please visit cp.com.
These declared values were obtained by laboratory type
testing in accordance with the stated standards and are
suitable for comparison with the declared values of other
tools tested in accordance with the same standards. These
declared values are not adequate for use in risk assessments
and values measured in individual work places may be higher.
The actual exposure values and risk of harm experienced by
an individual user are unique and depend upon the way the
user works, he workpiece and the workstation design, as well
upon the exposure time and he physical condition of the user.
We, Chicago Pneumatic, cannot be held liable for the
consequences of using the declared values, instead of
values reecting the actual exposure, in an individual risk
assessment in a work place situa ion over which we have no
control.
This tool may cause hand-arm vibration syndrome if its
use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at www.pneurop.eu/uploads/
documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf
We recommend a programme of health surveillance to
detect early symptoms which may relate to noise or vibration
exposure, so that management procedures can be modied to
help prevent future impairment.
INSTRUCTION MANUAL
Machine Type:
This product is designed for installing and removing threaded
fasteners in wood, metal and plastic. No other use permitted.
For professional use only.
Air Supply Requirements
1. Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher
pressure drastically reduces tool life.
2. Connect tool to air line using pipe, hose and tting sizes
shown in the diagram below.
Lubrication
1. Use an air line lubricator with ISO VG15 oil, adjusted to
two (2) drops per minute. If an air line lubricator cannot be
used, add air motor oil to the inlet once a day.
Operation
1. The intended use of these impact screwdrivers is with
impact rated screw bits operating upon threaded fasteners.
To operate, pull trigger on handle.
Maintenance
1. After rst year, disassemble and inspect air motor and
impacting clutch every three (3) months if the tool is used
every day. Replace damaged or worn parts.
2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following service kits
are recommended:
Tune-Up Kit: see part lists :
CP2036 : 8940208293
CP2037 : 8940208351
CP2041 : 8940208296
CP2042 : 8940208380
Technical Data
Free speed:
CP2036, CP2037 : 10 000 RPM
CP2041 : 15 000 RPM
CP2042 : 5 600 RPM