CHIEF MSB-6510 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8840-000090 Rev01
2007 Chief Manufacturing
www.chiefmfg.com
11/07
MSB-6510
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Interface Side Brackets (2) Interface Center Brackets
(4) Mounting Buttons – Tapped (8) 10-24 x .500 Button Head Cap Screws
(4) M8 x 30mm Phillips Head Cap Screws (4) .680 x .390 x .625 Nylon Spacers
(1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
NOTE: If installing screen on a Chief J-series wall mount, proceed
to Step 3 (J-Series VESA Interface Installation).
1. Chief Q-latch Button Installation (Used with M-series mounts):
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to center brackets (four places) (see
Figure 2 & Figure3).
2. Proceed to Step 4 (Side Bracket Assembly).
CAUTION!
Figure 1
Figure 2 Figure 3

3. J-Series VESA Interface Installation: Using the 10-24 button head cap screws along with the 10-24 Nylock
nuts (provided with J-Series mount), attach VESA interface from J-
Series mount to center brackets (see Figure 4 & Figure 5).
4. Side Bracket Assembly: Attach center brackets to side brackets using the 10-24 button head cap screws (see
Figure 6 & Figure 7).
5. Bracket Installation: Place nylon spacers over mounting holes of screen and attach brackets to back of display
using the M8 screws (see Figure 8 & Figure 9). Do not over tighten screws.
6. Follow the Chief mount instruction manual for screen installation.
Figure 4 Figure 5
Figure 6 Figure 7
Figure 8 Figure 9