CHIEF PSB-2307 User manual

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX [phone]
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8804-000193 RevB
2004 Chief Manufacturing
www.chiefmfg.com
11/04
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS
(
79.38 KG
)
.
PSB-2307
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) LCD Interface Bracket (4) Mounting Buttons-Tapped 10-24 (1) 1/8” Allen Key
(4) 10-24 x .5” Button Head Cap Screws (4) M4 x 45mm Socket Head Cap Screws (4) #10 Flat Washer
(4) .75 x .505 x .125 Thin Nylon Spacer (4) .74 x .39 x 1.0 Thick Nylon Spacer (1) M3 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see
Figure 2 & Figure 3).
CAUTION!
Figure 1
WARNING!
Figure 2 Figure 3

2. Stack thin and thick Nylon spacers on mounting holes, aligning hole pattern on brackets with pattern on
back of the display (see Figure 4 & Figure 5).
3. Using flat washers and M4 screws, secure brackets to the display. Do not over tighten screws.
4. With the aid of another person, lift the display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure the display, making sure latch is completely engaged.
Figure 4 Figure 5