CHIEF SSC Bracket SSC-1 User manual

CHIEF MANUFACTURING INC. 8802-000124
1-800-582-6480 952-894-6280 FAX [phone] Chief Manufacturing
12800 HIGHWAY 13 SOUTH, SUITE 500 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 01/04
INSTALLATION INSTRUCTIONS
BRACKET
SSC-1, SSC-2, SSC-3
The SSC bracket is designed for adding additional security to installations. By installing the SSC, a locking
device can be placed to obscure access to fastening hardware.
Unpack and check contents (see Figure 1) :
(Qty. 3) Bracket SSC-1 [up to 10-24 (M5)], SSC-2 [up to ¼” (M7)], or SSC-3 [from M7 to 5/16”(M8)]
Figure 1.
1. Remove screw to be secured.
2. If screw to be secured is not a cap screw, replace existing screw with a cap screw.
3. Install bracket and secure using cap screw (see Figure 2).
Figure 2.
4. Install locking device in bracket, making sure locking device is large enough to cover access to cap
screw (see Figure 3).
Figure 3.
Lock not included