CHIEF MSB-6309 User manual

INSTALLATION INSTRUCTIONS
8840-000048 RevB
10/18/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: chi[email protected]
MSB-6309
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
Figure 1
(2) Interface Side Brackets (2) Interface Center Brackets
(4) Mounting Buttons – Tapped (8) 10-24 x .5” Button Head Cap Screws
(4) M6 x 35mm Phillips Head Cap Screws (4) .500 x .257 x .625 Nylon Spacers
(1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION! DISPLAYS ARE EXTREMELY FRAGILE.
NOTE: If installing screen on a Chief J-series wall mount, proceed to Step 3 (J-Series VESA Interface Installation).
1. Chief Q-latch Button Installation (Used with MSR, MTR, MWH, MWR, MCS and MCD mounts): Using a
10-24 button head cap screw inserted from back side of bracket, secure mounting button, with chamfered hole of
mounting button (larger surface) facing bracket, to center brackets (four places) (see Figure 2 and Figure 3).
2. Proceed to Step 4 (Side Bracket Assembly).
Figure 2 Figure 3

Installation Instructions MSB-6309
2
3. J-Series VESA Interface Installation: Using the 10-24 button head cap screws along with the 10-24 Nylock nuts
(provided with J-series mount), attach VESA interface from J-Series mount to center brackets (See Figure 4
and Figure 5).
Figure 4
Figure 5
4. Side Bracket Assembly: Attach center brackets to side brackets using the 10-24 button head cap screws (see
Figure 6 and Figure 7).
Figure 6
Figure 7
5. Bracket Installation: Place nylon spacers over mounting holes of screen and attach brackets to back of display
using the M6 screws (see Figure 8 and Figure 9). Do not over tighten screws.
6. Follow the Chief mount instruction manual for screen installation.
Figure 8
Figure 9