Child Craft F32401 User manual

1
AB20073E
AB20072_G1
SINCE 1954
TM
Assembled as Crib
AB20072_G2
Assembled as Toddler Bed
Foundations®Worldwide, Inc.
5216 Portside Dr., Medina Oh, 44256 USA • PH: 1 330.722.5033 • FAX: [phone]
www.foundations.com
Bradford Full Size Traditional Wood Crib
ASSEMBLY ASSISTANCE
IMPORTANT: retain for future reference read
carefully.
Foundations®strives for the highest quality in our
products but occasionally a missing part or problem
can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.foundations.com or call Foundations®
for assistance at 1-877-716-2757 (U.S. Only) or
1-330-722-5033 (Monday through Friday, 9:00
a.m.– 4:00 p.m. Eastern Time). Please have the
model number and manufacture date available
when you call or write us at:
Foundations®, 5216 Portside Dr. Medina Oh. 44256
KEEP INSTRUCTIONS FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-877-716-2757
(outside of U.S. 330-722-5033). DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR FEDERAL SAFETY STANDARD
COMPLIANCE CERTIFICATES, PLEASE VISIT
OUR WEBSITE AT
www.foundations.com
Record the information for your product here:
Model number:
Manufacture date:
PO number:
Models Covered: F32401
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including poly bag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS
THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA
INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA

2
Hardware Package
AB20072_G4
O
P
QR
ST
V
N
Crib Parts
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
AB20072_G3
AB
CDEF
GHI
JK
LM
PARTS LIST
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct Crib on an even at oor.
Note: during the assembly process whenever
using screws or bolts, Check each with the parts list
by letter and size identication. Place each screw
or bolt on the diagram of the item which is sketched
actual size. Be sure to use the proper size specied
in the assembly directions. If any parts are missing
or broken or you need assistance with assembly.
DO NOT return your product to the dealer.
Please identify the crib by the model number
identication stamped on the inside face of the
Short Head Assembly or Short Foot Assembly when
you call or write to Foundations®. Make note of all
identification numbers and include this information
with your request.
The Allen Head Bolts (Q) have a friction enhancing
patch on the thread which may cause resistance
during tightening.
DO NOT Substitute Parts!
A. Stationary Side Assembly
B. Long Foot Assembly
C. Short Head Assembly
D. Short Foot Assembly
E. Head Post - Right
F. Head Post - Left
G. Foot Post - Left
H. Foot Post - Right
I. Stretcher
J. Post cap - Left
K. Post cap - Right
L. Guard Rail Extender
M. Spring
N. Allen Head Bolt 6mm x 90mm
O. Allen Head Bolt 6mm x 60mm
P. Allen Head Bolt 6mm x 45mm
Q. Allen Head Bolt 6mm x 14mm
R. Connector Nut
S. Joint Connector Nut
T. Dowel Pin 8mm x 30mm
V. Allen Wrench
Part Description Part Number Quantity
22301218
22301211
22301228
22301229
22301216
22301214
22301204
22301206
22301235
22301233
22301234
22300316
11200405
11200416
11200326
11200373
11200328
11200331
11200330
11200359
11200070
1
1
1
1
1
1
1
1
1
1
1
2
1
10
8
16
12
18
10
4
2

3
Figure 1
STEP 1
AB20072_G5
C
F
P
Q
P
RR
G
STEP 2
Figure 2
AB20072_G6
A
F
N
S
Construct Short Foot and Head assembly:
Short Head Assembly:
Insert Allen Head Bolts (Q) and Connector Nuts (R)
into holes in Head Post -Left (F) as shown to ll in
unused Holes.
Insert Allen Head Bolt (P) and Connector Nut (R)
into hole in Foot Post -Left (G) as shown to ll in
unused Holes. Tighten Bolts with Allen Wrench.
Align Head Post -Left (F) with Short Head Assembly
(C). Insert Allen Bolts (P) and Snug Bolts with Allen
Wrench.
Align Foot Post - Left (G) with Short Head Assembly
(C). Insert Allen Bolts (P) and Snug Bolts and Nuts
with Allen Wrench.
Tighten all Nuts and Bolts securely.
See gure 1.
Repeat the above procedure with Short Foot
Assembly (D) Head Post - Right (E) and Foot Post -
Right (H).
Stationary Side Assembly to Short Head Assembly:
Place Joint Connector Nuts (S) into holes in the
back of top rail and bottom of bottom rail of
Stationary Side Assembly (A). Align Head Post - Left
(F) with Stationary Side Assembly (A). Insert Allen
Head Bolts (N) into Head Post - Left (F) and Rotate
Joint Connectors Nuts to align threads with bolts
and snug with Allen wrench .
Tighten all Nuts and Bolts securely.
See gure 2

4
Figure 3
STEP 3
AB20069_G7
S
A
E
N
STEP 4
Figure 4
AB20072_G8
I
S
N
N
G
H
Stationary Side Assembly to Short Foot Assembly:
Place Joint Connector Nuts (S) into holes in the
back of top rail and bottom of bottom rail of
Stationary Side Assembly (A). Align Head Post -
Right (E) with Stationary Side Assembly (A). Insert
Allen Head Bolts (N) into Head Post - Left (E) and
Rotate Joint Connectors Nuts to align threads with
bolts and snug with Allen wrench .
Tighten all Nuts and Bolts securely.
See gure 3.
Assemble Stretcher to crib.
Insert Joint Connector Nuts (S) into Stretcher (I) .
Align and insert dowels on end of stretcher into
holes in Foot Posts (H) and (G).
Insert Allen Head Bolts (N) into Foot Posts
(H) and (G) . Rotate Joint Connectors Nuts to align
threads with bolts and loosely tighten with Allen
wrench.
Tighten all Nuts and Bolts securely.
See gure 4.

5
Figure 5
STEP 5
Add Mattress Spring to crib.
There are 2 positions for the Spring (M) shown as
(1) and (2). The position must be the same as for all
the brackets attached to the crib.
Note: Pouches containing warnings and instructions
face up on top surface of Spring.
Position tabs on Spring at approximately a 45
degree angle. The Spring (M) is lowered into the
crib. Take care not to scratch the wood with the
metal Spring. Align the Spring Brackets with the
holes in the crib at the desired height. Insert
Allen Bolt (Q) into hole in spring brackets from
inside of crib then through correct height hole in the
crib together with Connector Nut (R). Insert
Connector Nuts (R) and Allen Head bolts (Q) into
unused Holes.
Tighten all bolts securely with Allen Wrenches.
To Adjust height of Spring (M) remove Nuts and
Bolts. Then relocate Spring (M) to new height
adjustment level and install Nuts and Bolts as
described in previous paragraph.
See gure 5.
AB20072_G9
2
1
MQ
R
QR
AB20072_G10
N
S
G
B
N
H
Figure 6
STEP 6
Construct Long Foot Assembly to crib:
Align Long Foot Assembly (B) between Foot Posts
(G) and (H) and Dowels in Long Foot Assembly with
Holes in Foot Posts. Insert Joint Connector Nuts (S)
into Long Foot Assembly rails. Insert Allen Bolts (N)
through Foot Posts. Rotate Joint
Connectors Nuts to align threads with Bolts and
snug with Allen wrench .
Tighten all Nuts and Bolts securely.
See gure 6

6
Toddler Bed
Figure 7
AB20072_G12
P
J
T
P
K
T
G
H
RP
Toddler bed conversion:
Follow assembly instructions up to and including
installation of Stretcher (I) shown in Step 4.
Spring (M) should be assembled and installed in the
lowest position as shown in Step 5.
If the Long Foot Assembly (B) is in place it must
be removed. Save the hardware and Assembly for
future possible use.
Holes remaining from the Removal of the Long Foot
Assembly (B) must be lled with Connector Nuts (R)
and Allen Bolts (P) to prevent nger entrapment.
Insert Dowel Pins (T) into top of Foot Posts (G) and
(H). Align Post Cap - Left (J) onto Foot Post - left
(G) and press onto Dowel Pins. Insert Allen Head
Bolt (P) ithrough Post cap into Foot post and tighten.
Repeat above procedure with Post cap - Right (K)
onto Foot Post (H).
See gure 7.
Finishing Touches
Place a purchased full sized mattress on the spring.
After completing the crib assembly, and after
making yourself aware of WARNINGS, CAUTIONS,
CLEANING,STORAGE,USE and MAINTENANCE
of crib on pages 9 and 10, store the assembly
directions in the pouch which was pre-attached to
the spring. For future referral to assembly directions
you will only need to remove them from the pouch.
We caution you not to store excess hardware in
pouch as this would be a danger to child if retrieved
by him/her.
AB20072_G11

7
WARNING
WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a
small child. NEVER use bed with children younger than 15 months. ALWAYS follow
assembly instructions.
WARNING:STRANGULATION HAZARD: NEVER place bed near windows
where cords from blinds or drapes may strangle a child. NEVER suspend strings
over bed. NEVER place items with a string, cord or ribbon, such as hood strings or
pacifier cords, around a child’s neck. These items may catch on bed parts.
CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310
mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
• This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Foundations® for assistance. Refer to maintenance section for contact
information.
WARNING
WARNING
WARNING
WARNINGS (For Toddler Bed)
Guard Rail Option and Installation
For added security, a guard rail can be purchased for
this crib. Contact Foundations® or your dealer.
Follow the directions supplied with the purchased
Guard Rail.
Note: 4 of the Allen Head Bolts (N) and (2) Guard
Rail extenders(L) will be needed to attach the Guard
Rail.
Guard Rail extenders (L) must be installed between
Guard Rail and Foot Posts (G) and (H) for this crib.
If the Long Foot Assembly (B) and Stretcher (I) is in
place it must be removed. Save the hardware and
assemblies for future possible use.
Holes remaining from the Removal of the Long Foot
Assembly and Stretcher must be lled with
Connector Nuts (R) and Allen Bolts (P) after Guard
Rail is installed to prevent nger entrapment.
Note:Keep All parts and these instructions for Further
use and reference. General guard rail instructions
will be included in the guard rail kit.
Post Caps (J) and (K) must be installed using the
Toddler Bed conversion instruction.
See gure 8.
AB20072_G13
K
J
L
G
H
RP
RP
Figure 8

8
Maintenance Cleaning and Storage
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and
secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after
assembly and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.
Call Foundations® at 330.722.5033 and include model identication numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly
dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a
soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s
skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne
furniture.
STORAGE:
When storing crib use Caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away
from any wood furniture item.
After completing the assembly the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the
crib spring for the permanent storage of the assembly directions. Please place the complete set of
assembly directions into the pouch for future referral. We caution the user to not place excess
hardware in the pouches as it could present danger to the child if retrieved.
CAUTION
• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND
FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK
SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND
TIGHTEN IF NEEDED.

9
Meets CPSC
Safety Requirements
SINCE 1954
TM
5216 Portside Dr.
Medina Ohio 44256 USA
Telephone: [phone]
Fax: [phone]
www.child-craft.com
www.foundations.com
WARNING
• DO NOT use this crib if you cannot exactly follow the accompanying instructions.
• DO NOT use this crib for a child who can climb out of it or who is taller than 90 cm.
• DO NOT place in or near this crib any cord, strap or similar item that could become
wrapped around a child’s neck.
•DO NOT place this crib near a window or a patio door where a child could reach the
cord of a blind or curtain and be strangled.
• Ensure that the sides of the crib are properly latched or locked in the appropriate
position when a child is left unattended in it.
• Check this crib regularly before using it and do not use it if any parts are loose or
missing or if there are any signs of damage. Do Not substitute parts. Contact the
manufacturer if replacement parts or additional instructions are needed.
• Use a crib mattress that is no thicker than 15 cm thick and is of such a size that,
when it is pushed firmly against any side of the crib, it does not leave a gap of
more than 3 cm between the mattress and any part of the sides of the crib.
• Children can suffocate on soft bedding. Do Not place pillows, comforters or soft
mattresses in this crib.
Full Size Bed Conguration
Figure 9
AB20072_G14
R
O
Full Size Bed conversion:
The crib can be converted to a full size bed with the
purchase of a bed rail and slat kit from
Foundations®.
Use Allen Bolts (O) from existing hardware and
re-use the Joint Connectors (R).
Remove and save the Short Foot Assembly (C) and
Short Head Assembly (D) for future use.
For further Full size bed conguration refer to
instructions with the bed rails and slats.
See gure 9.

10
SINCE 1954
TM
Bradford Full Size Wood Crib
Modèles couverts : F32401
THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN CANADA
INSTRUCTIONS D’ASSEMBLAGE POUR LES LITS DE BÉBÉ VENDUS AU CANADA
Foundations®Worldwide, Inc.
5216 Portside Dr., Medina, Oh 44256 É-U • Téléphone: 1 330.722.5033 • Télécopieur: 1 330.722.5037
www.foundations.com
CONSERVEZ CES INSTRUCTIONS À TITRE DE RÉFÉRENCE.
POUR LE SERVICE À LA CLIENTÈLE, APPELEZ LE 1-877-
716-2757
(à l’extérieur des É-U, appelez le 1-330-722-5033).
N’APPELEZ PAS LE VENDEUR OU LE DISTRIBUTEUR
POUR LE SERVICE À LA CLIENTÈLE, CAR ILS NE SONT
PAS AUTORISÉS À RÉSOUDRE CE
GENRE DE PROBLÈMES.
POUR OBTENIR DES CERTIFICATS DE CONFORMITÉ
AUX NORMES DE SÉCURITÉ FÉDÉRALES, VEUILLEZ
VISITER NOTRE SITE WEB AU
www.foundations.com
GUIDE D’ASSEMBLAGE
IMPORTANT: conserver pour consultation
future - lire attentivement.
Foundations® met tout en œuvre pour fabriquer
des produits de la plus haute qualité. Néanmoins,
malgré tous nos efforts, il arrive parfois qu’une
pièce manque ou qu’une difculté se présente
pendant l’assemblage. Si une pièce est manquante
ou brisée, ou si vous avez besoin d’aide pour as-
sembler le produit, NE retournez PAS le produit au
détaillant. Visitez notre site Web au www.founda-
tions.com ou demandez de l’aide à Foundations®
en composant le 1-877-716-2757 (É.-U. seulement)
ou le 1-330-722-5033 (du lundi au vendredi, de 9
h 00 à 16 h 00, heure de l’Est). Assurez-vous de
disposer du numéro de modèle et de la date de
fabrication du produit lorsque vous nous appelez ou
nous écrivez au :
Foundations®, 5216 Portside Dr. Medina, OH.
44256
• L’assemblage doit être effectué par un adulte.
• Veuillez lire toutes les instructions AVANT de
commencer l’assemblage et l’utilisation du produit.
• Déballez le produit et enlevez les matériaux
d’emballage, y compris le sac en polyéthylène.
Identiez et vériez toutes les pièces.
INSTRUCTIONS D’ASSEMBLAGE
Assemblé en lit de bébé
Assemblé en lit d’enfant.
Inscrivez les renseignements de votre
produit ici :
Numéro de modèle :
Date de fabrication :
No de commande :
AB20072_G1
AB20072_G2