Child Craft Soho Flat Top Convertible Crib F33901 User manual

1
5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.723.0599 • FAX: [phone]
www.childcraftbaby.com
Soho Flat Top Convertible Crib
KEEP INSTRUCTIONS FOR FUTURE USE .
Model Covered: F33901
Assembled as Toddler Bed
FOR CUSTOMER SERVICE CALL
330-723-0599. DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY
STANDARD COMPLIANCE CERTIFICATES,
PLEASE VISIT OUR WEBSITE AT
www.childcraftbaby.com Assembled as Crib
AB20471_G1
AB20471_G2
AB20471B
Record the information for your product here:
Model number: ___________________
Manufacture date: ___________________
PO number: ___________________
ASSEMBLY ASSISTANCE
IMPORTANT: Retain for future reference and
read carefully.
Child Craft strives for the highest quality in our
products but occasionally a missing part or
problem can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.childcraftbaby.com or call Child Craft for
assistance at 1-330-723-0599 (Monday through
Friday, 9:00 a.m.– 4:00 p.m. Eastern Time). Please
have the model number and manufacture date
available when you call or write us at:
Child Craft, 5216 Portside Dr., Medina, OH 44256
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including polybag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS
THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS
SOLD IN THE UNITED STATES AND CANADA.

2
Part Description Part Number Qty.
A. Footboard 22303067 1
B. Headboard 22304014 1
C. Side 22303046 2
D. Leg 22303049 2
E. Toddler Bed Rail 22303056 1
F. Toddler Headboard Post 22303063 1
G. Toddler Footboard Post 22303065 1
H. Spring 11201023 1
AA. Allen Head Bolt 57mm Long 11200911 8
BB. Allen Head Bolt 32mm Long 11200912 8
CC. Allen Wrench 11200978 2
DD. Allen Head Bolt 16mm Long 11200913 8
EE. Connector Nut 11201001 4
FF. Allen Head Bolt 70mm Long 11200916 2
GG. Joint Connector Nut 11200970 2
HH. Allen Head Bolt 45mm Long 11200915 4
PARTS LIST
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list. Construct
furniture on an even at oor.
Note: during the assembly process whenever using
screws or bolts, check each with the parts list by letter
and size identication. Place each screw or bolt on the
diagram of the item which is sketched actual size. Be
sure to use the proper size specied in the assembly
directions. If any parts are missing or broken or you need
assistance with assembly DO NOT return your product
to the dealer. Please identify the furniture by the model
number identication stamped on the inside face of the
assembly when you call or write to Child Craft.
Make note of all identification numbers and include this
information with your request.
DO NOT Substitute Parts!
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
Crib Parts
Hardware Package
AB20471_G3
A
C
D
E
F
G
B
H
CC
AA
BB
DD
EE
FF
HH
GG
AB20471_G4

3
STEP 1
STEP 2
B x 1
DD x 4
EE x 4
AB20471_G5
EE x 2
B
EE x 2
DD x 2
DD x 2
C x 1
AA x 2
AB20471_G6
AA x 2
C

4
STEP 3
STEP 4
C x 1
AA x 2
AB20471_G7
C
AA
1
2
3
H x 1
DD x 4
AB20471_G8
DD
H
DD

5
STEP 5
STEP 6
A x 1
AA x 4
AB20471_G9
AA
AA
A
D x 2
BB x 8
AB20471_G10
D x 2
BB x 4
BB x 4

6
MATTRESS INSTALL
Place a purchased full sized
mattress on the spring.
The warnings for the United
States and Canada can be
found after the maintenance,
cleaning, and storage
information section.
AB20471_G11
CAUTION (For United States)
• ANY MATTRESS USED IN THIS CRIB SHALL
BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A
THICKNESS NOT EXCEEDING 6 IN. IF
YOUR CRIB IS DESIGNED TO CONVERT TO
A TODDLER BED, THE MATTRESS MUST BE
AT LEAST 4 IN. (100 MM) THICK.

7
TODDLER BED CONVERSION STEP 2
TODDLER BED CONVERSION STEP 1
E x 1
F x 1
G x 1
FF x 2
GG x 2
AB20471_G13
GG
GG
FF
G
F
FF
E
AB20471_G12

8
TODDLER BED CONVERSION STEP 3
AA x 4
HH x 4
AB20471_G16
AA
HH x 2
HH x 2
AA
WARNINGS (For Toddler Bed)
WARNING: INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a
small child. NEVER use bed with children younger than 15 months. ALWAYS follow
assembly instructions.
WARNING: STRANGULATION HAZARD: NEVER place bed near windows
where cords from blinds or drapes may strangle a child. NEVER suspend strings over
bed. NEVER place items with a string, cord or ribbon, such as hood strings or
pacifier cords, around a child’s neck. These items may catch on bed parts.
CAUTION: ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310
mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
•This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Child Craft for assistance. Refer to maintenance section for contact information.

9
GUARD RAIL OPTION & INSTALLATION
AB20471_G14
Assembly bolts come with guard rail kit available from your Child Craft dealer.
FULL SIZE BED CONFIGURATION
ATTENTION: THE FOLLOWING HARDWARE NEEDED FOR THE FULL SIZE
BED CONVERSION ARE NOT PROVIDED BY CHILD CRAFT, BUT MAY BE
PURCHASED AT YOUR LOCAL HARDWARE STORE.
S. Full Size Hollywood Style Bed Frame.
T. 1/4”-20 x 3” Long Bolts.
U. 1/4”-20 Nuts.
Align Hollywood Bed Frame with holes in Headboard (B). Insert Bolts (T)
Through Headboard (B) and Bed Frame.
B x 1
S x 1
T x 4
U x 4
AB20471_G15
B
S
U x 2
T x 2
U x 2
T x 2
Shop for Your Crib’s Matching
Guard Rails
Shop for Your Crib’s Matching
Bed Rails

10
MAINTENANCE, CLEANING, AND STORAGE
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after assembly
and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need assistance DO NOT return crib to your dealer.
Call Child Craft at 330.723.0599 and include model identication numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly dampened in
the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s skin, scouring
pads, steel wool or coarse rags. This crib should be treated the same as any ne furniture.
STORAGE:
When storing crib use caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away from any wood
furniture item.
After completing the assembly, the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE, AND MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to
the crib spring for the permanent storage of the assembly directions. Please place the complete set
of assembly directions into the pouch for future referral. We caution the user to not place excess
hardware in the pouches as it could present danger to the child if retrieved.
Shop More for Your
Nursery, Toddler,
Playroom & Beyond