Child Craft F33601 User manual

This page is for printing and document
formating specications only.
THIS PAGE DOES NOT PRINT.
DO NOT scale the artwork for printing. Each page
has been scaled for proper scaling of parts.
Page 1 will be the cover page and rst page printed
after this specication page. Any blank pages needed will
be placed at the end of this booklet.
printer to arrange booklet pages in proper
sequence according to page number.
297 mm
210 mm
Revisions:
A: Initial Release 04/01/2021 RDA

1
AB20446A
Assembled as Crib
AB20446_G1
AB20446_G2
Assembled as Toddler Bed
5216 Portside Dr., Medina, OH 44256 USA • PH: 1.330.723.0599 • FAX: [phone]
www.childcraftbaby.com
Denman Convertible Crib
IMPORTANT: Retain for future reference and
read carefully.
Child Craft strives for the highest quality in our
products but occasionally a missing part or
problem can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.childcraftbaby.com or call Child Craft for
assistance at 1-330-723-0599 (Monday through
Friday, 9:00 a.m.– 4:00 p.m. Eastern Time). Please
have the model number and manufacture date
available when you call or write us at:
Child Craft, 5216 Portside Dr., Medina, OH. 44256
KEEP INSTRUCTIONS FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-330-723-0599. DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY
STANDARD COMPLIANCE CERTIFICATES,
PLEASE VISIT OUR WEBSITE
AT www.childcraftbaby.com
Record the information for your product here:
Model Number:___________________________
Manufacture Date:_________________________
PO Number:______________________________
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including polybag. Identify and check all parts.
Model Covered: F33601
ASSEMBLY INSTRUCTIONS
ASSEMBLY ASSISTANCE

2
Hardware Package
Furniture Parts
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct furniture on an even at oor.
Note: During the assembly process whenever
using screws or bolts, check each with the parts list by
letter and size identication. Place each screw or bolt on
the diagram of the item which is sketched actual size.
Be sure to use the proper size specied in the assembly
directions. If any parts are missing or broken or you need
assistance with assembly, DO NOT return your product
to the dealer. Please identify the furniture by the model
number identication stamped on the assembly when
you call or write to Child Craft. Make note of all
identification numbers and include this information with
your request.
DO NOT Substitute Parts!
#2 Medium Straight Screwdriver
AB20446_G3
A
B
C
D
E
F
G
H
I
AB20446_G4
J
K
L
M
N
O
P
Q R
S
PARTS LIST
PREPARATION
SUGGESTED TOOLS
Part Description Part Number Qty.
A. Stretcher 22303914 1
B. Right Side 22303905 1
C. Left Side 22303906 1
D. Footboard 22303899 1
E. Headboard Right Post 22303916 1
F. Headboard Left Post 22303915 1
G. Headboard 22303897 1
H. Headboard Bottom Rail 22303923 1
I. Mattress Spring 11200975 1
J. Joint Connector Nut 11200330 4
K. Connector Nut 11201269 8
L. 8mm x 30mm Dowel Pin 11200969 3
M. 10mm x 40mm Dowel Pin 11200995 8
N. 6mm x 14mm Allen Head Bolt 11200328 4
O. 6mm x 20mm Allen Head Bolt 11200384 8
P. 6mm x 50mm Allen Head Bolt 11200372 8
Q. 6mm x 60mm Allen Head Bolt 11200326 4
R. 6mm x 90mm Allen Head Bolt 11200416 6
S. Allen Wrench (4mm) 11200070 2

3
G x 1
M x 4
L x 3
AB20446_G6
M x 2
G
L
M x 2
STEP 1
STEP 2
AB20446_G5
F
E
M
H
M
E x 1
F x 1
H x 1
M x 4

4
R x 6
R
R
AB20446_G7
AB20446_G8
K x 4
N x 4
K x 4
N x 4
STEP 4
STEP 3

5
STEP 6
STEP 5
P x 2
C
C x 1
P x 2
AB20446_G9
AB20446_G10
B x 1
P x 2
P x 2
B

6
A x 1
J x 4
Q x 4
AB20446_G11
Q x 4
J x 4
A
I x 1
O x 4
AB20446_G12
O
I
O
STEP 7
STEP 8

7
Place a purchased full sized
mattress on the spring.
The warnings for the United
States can be found
immediately after the
maintenance, cleaning, and
storage information section.
AB20446_G14
STEP 9
MATTRESS INSTALL
AB20446_G13
D x 1
P x 4
P
P
D

8
TODDLER BED CONVERSION
1 2
AB20446_G15
K
Remove footboard
assembly for toddler
bed conversion.
K x 4
O x 4
D x 1
P x 4
O x 2
O x 2
P
P
D
WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a
small child. NEVER use bed with children younger than 15 months. ALWAYS follow
assembly instructions.
WARNING:STRANGULATION HAZARD: NEVER place bed near windows
where cords from blinds or drapes may strangle a child. NEVER suspend strings over
bed. NEVER place items with a string, cord or ribbon, such as hood strings or
pacifier cords, around a child’s neck. These items may catch on bed parts.
CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310
mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
•This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Child Craft for assistance. Refer to maintenance section for contact information.
WARNINGS (For Toddler Bed)

9
FULL SIZE BED CONFIGURATION
The bolts used to
attach the Guard Rail
are included with
the Guard Rail.
AB20446_G16
TODDLER BED GUARD RAIL OPTION AND INSTALL
K
O
O
O
K x 4
O x 8
AB20446_G17
Reference Bed and Guard Rail assembly instructions.
Guard Rail and Full Bed Options are complete kits that can be purchased separately
from your Child Craft dealer.