Child Craft Redmond F32801 User manual

1
AB20062G
AB20062_G3
SINCE 1954
TM
Assembled as Crib
AB20062_G4
Assembled as Toddler Bed
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
Foundations Worldwide, Inc.
5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: [phone]
www.foundations.com
Redmond 4-in-1 Convertible Crib
ASSEMBLY ASSISTANCE
IMPORTANT: retain for future reference read
carefully.
Foundations strives for the highest quality in our
products but occasionally a missing part or problem
can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.foundations.com or call Foundations
for assistance at 1-877-716-2757 (U.S. Only) or
1-330-722-5033 (Monday through Friday, 9:00
a.m.– 4:00 p.m. Eastern Time). Please have the
model number and manufacture date available
when you call or write us at:
Foundations, 5216 Portside Dr. Medina OH. 44256
KEEP INSTRUCTIONS FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-877-716-2757
(outside of U.S. 330-722-5033). DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY STANDARD
COMPLIANCE CERTIFICATES,
PLEASE VISIT OUR WEBSITE AT
www.foundations.com
Record the information for your product here:
Model number:
Manufacture date:
PO number:
Models Covered: F32801.
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including poly bag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS
THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

23
A. Stationary Side Assembly
B. Long Foot Assembly
C. Short Foot Assembly
D. Short Head Assembly
E. Stationary Post Left
F. Stationary Post Right
G. Top Back Rail Assembly
H. Base Front Rail Assembly
I. Foot Post Left
J. Foot Post Right
K. Cleat
L. Guard Rail Extender
M. Post Cap Left
N. Post Cap Right
O. Spring
P. Allen Head Bolt 6mm x 80mm
Q. Allen Head Bolt 6mm x 70mm
R. Allen Head Bolt 6mm x 45mm
S. Allen Head Bolt 6mm x 25mm
T. Allen Head Bolt 6mm x 14mm
U. Connector Nut 6mm
V. Joint Connector Nut 6mm
AA. Dowel Pin 8mm x 40mm
BB. Allen Wrench 4mm
Figure 1
STEP 1
Hardware Package
AB20069_G2
P
AA
Q
RS
TUV
BB
Crib Parts
PARTS LIST
Part Description Part Number Quantity
22301109
22301118
22301138
22301129
22301115
22301117
22301139
22301122
22301126
22301128
22301137
22300316
22301143
22301144
11200404
11200324
11200332
11200373
11200327
11200328
11200331
11200330
11200348
11200070
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
16
8
14
8
16
22
18
6
2
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct Crib on an even at oor.
Note: during the assembly process whenever
using screws or bolts, Check each with the parts list
by letter and size identication. Place each screw
or bolt on the diagram of the item which is sketched
actual size. Be sure to use the proper size specied
in the assembly directions. If any parts are missing
or broken or you need assistance with assembly.
DO NOT return your product to the dealer.
Please identify the crib by the model number
identication stamped on the inside face of the
Short Head Assembly or Short Foot Assembly when
you call or write to Foundations. Make note of all
identification numbers and include this information
with your request.
The Allen Head Bolts (S) and (T) have a friction
enhancing patch on the thread which may cause
resistance during tightening
DO NOT Substitute Parts!
AB20062_G5
R
U
I
R
T
T
U
K
D
E
S
STEP 2
Construct Short Foot and Head assembly:
Short Head Assembly:
Insert Allen Head Bolts (S) and (T) and Connector
Nuts (U) into holes in Foot Post Left (I) and
Stationary Post Left (E) as shown to ll in unused
Holes. Tighten Bolts with Allen Wrench (BB).
Align Stationary Post Left (E) with Short Head
Assembly (D). Insert Allen Bolts (R) and Snug Bolts
with Allen Wrench.
Align Foot Post Left (I) with Short Head Assembly
(D). Insert Allen Bolts (R) and Snug Bolts with Allen
Wrench.
Align Cleat (K) with 2 holes in the lower front of
Short Head Assembly (D). Insert Allen Bolts (R) and
Snug Bolts.
Tighten all Nuts and Bolts securely.
See gure 1.
Repeat the above procedure with Short Foot
Assembly (C) Stationary Post Right (F) and Foot
Post Right (J).
Figure 2
AB20072_G6
G
V
AA
E
P
A
Stationary Side Assembly to Short Head Assembly:
Place Joint Connector Nuts (V) into holes in the
bottom of top rail Stationary Side Assembly (A) and
bottom of bottom rail of Stationary Side Assembly
(A). Align Stationary Post Left (E) with Stationary
Side Assembly (A). Insert Allen Head Bolts (P) into
lower 2 holes of Stationary Post Left (E) and Rotate
Joint Connectors Nuts to align threads with bolts
and snug with Allen wrench.
Insert Dowel Pin (AA) into center hole of the Top
Back Rail Assembly (G). Place Joint Connector Nut
(V) into hole in the back of Back Rail Assembly (G).
Place groove in bottom of Back Rail Assembly (G)
over tenon in top of Stationary Side Assembly (A).
Insert Allen Head Bolt (P) into Stationary Post Left
(E) and Rotate Joint Connectors Nut to align threads
with bolts and snug with Allen wrench.
Tighten all Nuts and Bolts securely.
See gure 2.
AB20062_G1
AB
CDEF
G
H
IJ
K
L
M
NO

45
Figure 3
STEP 3
AB20069_G7
A
V
AA
F
P
G
STEP 4
Figure 4
AB20062_G8
K
I
HJ
R
Figure 5
STEP 5
Add Mattress Spring to crib.
There are 2 positions for the Spring (O) shown as
(1) and (2). Refer to warning section to determine
appropriate height for the intended child. The
position must be the same as for all the brackets
attached to the crib.
Note: Pouches containing warnings and instructions
face up on top surface of Spring.
Position tabs on Spring at approximately a 45
degree angle. The Spring (O) is lowered into the
crib. Take care not to scratch the wood with the
metal Spring. Align the Spring Brackets with the
holes in the crib at the desired height. Insert
Allen Bolt (T) into hole in spring brackets from inside
of crib then through correct height hole in the crib
together with Connector Nut (U). Insert
Connector Nuts (U) and Allen Head bolts (T) into
unused Holes.
Tighten all bolts securely with Allen Wrenches.
To Adjust height of Spring (O) remove Nuts and
Bolts. Then relocate Spring (O) to new height
adjustment level and install Nuts and Bolts as
described in previous paragraph.
See gure 5.
Stationary Side Assembly to Short Foot Assembly:
Insert Dowel Pin (AA) into center hole of the top rail
of Top Back Rail Assembly (G). Place Joint
Connector Nuts (V) into holes in the back of Top
Back Rail Assembly (G) and bottom of top and
bottom rail of Stationary Side Assembly (A). Align
Stationary Post Right (F) with Stationary Side
Assembly (A). Insert Allen Head Bolts (P) into
Stationary Post Right (F) and Rotate Joint
Connectors Nuts to align threads with bolts and
snug with Allen wrench .
Tighten all Nuts and Bolts securely.
See gure 3.
Assemble Base Front Rail Assembly to crib.
Assemble slots on top of Base Front Rail Assembly
(H) over tenon on bottom of Foot Posts (I) and (J).
Insert Allen Head Bolt (R) through Cleat (K) and into
Base Front Rail Assembly (H).
Tighten all Nuts and Bolts securely.
See gure 4.
AB20062_G9
2
1
OT
U
TU
AB20062_G10
P
V
I
B
P
J
AA AA
Figure 6
STEP 6
Construct Long Foot Assembly to crib:
Insert dowel pins (AA) into top of Foot Posts (I) and
(J). Align Long Foot Assembly (B) between Foot
Posts (I) and (J) and push down onto Dowel Pins.
Insert Joint Connector Nuts (V) into Long Foot
Assembly rails. Insert Allen Bolts (P) through Foot
Posts. Rotate Joint Connectors Nuts to align threads
with Bolts and snug with Allen wrench .
Insert additional Allen Bolts (P) into Bottom of Base
Front Rail Assembly (H) and into Long Foot
Assembly (B).
Tighten all Nuts and Bolts securely.
See gure 6

67
Toddler Bed
Figure 7
AB20062_G12
S
M
AA
I
SU
S
AA
N
J
Toddler bed conversion:
Follow assembly instructions up to and including
installation of Base Front Rail Assembly (H) shown
in Step 4.
Spring (O) should be assembled and installed in the
lowest position as shown in Step 5.
If the Long Foot Assembly (B) is in place it must
be removed. Save the hardware and Assembly for
future possible use.
Holes remaining from the Removal of the Long Foot
Assembly (B) must be lled with Connector Nuts (U)
and Allen Bolts (S) to prevent nger entrapment.
Insert Dowel Pins (AA) into top of Foot Posts (I) and
(J). Align Post Cap Left (M) onto Foot Post Left (I)
and press onto Dowel Pins. Insert Allen Head Bolt
(S) through Post cap into Foot post and tighten.
Repeat above procedure with Post Cap Right (N)
onto Foot Post (J).
See gure 7.
WARNING
WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM
ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a
small child. NEVER use bed with children younger than 15 months. ALWAYS follow
assembly instructions.
WARNING:STRANGULATION HAZARD: NEVER place bed near windows
where cords from blinds or drapes may strangle a child. NEVER suspend strings
over bed. NEVER place items with a string, cord or ribbon, such as hood strings or
pacifier cords, around a child’s neck. These items may catch on bed parts.
CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any
mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310
mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.
• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).
• Mattress MUST be moved into lowest position for proper positioning.
•This crib contains all components necessary to convert to a toddler bed. However,
a guardrail may be available for purchase to provide additional security. Contact
Foundations for assistance. Refer to maintenance section for contact
information.
WARNING
WARNING
WARNING
WARNINGS (For Toddler Bed)
Guard Rail Option and Installation
For added security, a guard rail can be purchased for
this crib. Contact Foundations or your dealer.
Follow the directions supplied with the purchased
Guard Rail.
Note: 4 of the Allen Head Bolts (P) and (2) Guard
Rail extenders (L) will be needed to attach the Guard
Rail.
Guard Rail extenders (L) must be installed between
Guard Rail and Foot Posts (I) and (J) for this crib. If
the Long Foot Assembly (B) is in place it must be
removed. Save the hardware and assemblies for
future possible use.
Holes remaining from the Removal of the Long Foot
Assembly and Stretcher must be lled with
Connector Nuts (U) and Allen Bolts (S) after Guard
Rail is installed to prevent nger entrapment.
Note:Keep All parts and these instructions for Further
use and reference. General guard rail instructions
will be included in the guard rail kit.
Post Caps (M) and (N) must be installed using the
Toddler Bed conversion instruction.
See gure 8.
AB20062_G14
N
M
L
I
J
SU
SU
Figure 8
Finishing Touches
Place a purchased full sized mattress on the spring.
After completing the crib assembly, and after
making yourself aware of WARNINGS, CAUTIONS,
CLEANING,STORAGE,USE and MAINTENANCE
of crib on pages 9 and 10, store the assembly
directions in the pouch which was pre-attached to
the spring. For future referral to assembly directions
you will only need to remove them from the pouch.
We caution you not to store excess hardware in
pouch as this would be a danger to child if retrieved
by him/her.
AB20062_G11

89
Maintenance Cleaning and Storage
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and
secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after
assembly and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.
Call Foundations at 330.722.5033 and include model identication numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly
dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a
soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s
skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne
furniture.
STORAGE:
When storing crib use Caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away
from any wood furniture item.
After completing the assembly the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the
crib spring for the permanent storage of the assembly directions. Please place the complete set of
assembly directions into the pouch for future referral. We caution the user to Not place excess
hardware in the pouches as it could present danger to the child if retrieved.
CAUTION
•ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST
27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING
6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A
TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN.
(100 MM ) THICK.
• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND
FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK
SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND
TIGHTEN IF NEEDED.
Full Size Bed Conguration
Figure 9
2AB20062_G12
Q
V
Q
Full Size Bed conversion:
The crib can be converted to a full size bed with the
purchase of a bed rail and slat kit from
Foundations®.
Use Allen Bolts (Q) from existing hardware and
re-use the Joint Connectors (V).
Remove and save the Short Foot Assembly (C) and
Short Head Assembly (D) for future use.
For further Full size bed conguration refer to
instructions with the bed rails and slats.
See gure 9.

10
• Read all instructions before assembling crib. Keep instructions for future use. A
pouch is attached to the crib for permanent storage of the instructional literature.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on
their backs to sleep, unless otherwise advised by your physician.
• Strings can cause strangulation! DO NOT place items with a string around a child’s
neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib
or attach strings to toys.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing
on loose fasteners.
• DO NOT place crib near window where cords from blinds or drapes may strangle a child.
•When child is able to pull to standing position, set mattress to lowest position and remove
bumper pads, large toys and other objects that could serve as steps for climbing out.
• Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm).
• After raising side, make sure latches are secure (if your unit has a movable side).
• DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position
whenever child is in crib (if your crib has a moveable side).
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing
parts or sharp edges before and after assembly and frequently during use. Securely tighten bolts
and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. If any
parts are missing or broken or you need assistance with assembly, DO NOT return the product to
your dealer. Call Foundations for assistance at 1 877.716.2757 (U.S. Only) or +1 330.722.5033 for
replacement parts and instructional literature if needed. Include model identication numbers
recorded on page 1 with your request. DO NOT substitue parts.
• Replace teething rail(s) if damaged, cracked or loose (if equipped with teething rails).
• If renishing use a non-toxic nish specied for children’s products.
• Follow warnings on all products in a crib.
• NEVER use plastic shipping bags or other plastic lm as mattress covers because they can
cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• DO NOT use a water mattress with this crib.
• When disassembling this crib, DO NOT remove any item attached with wood screws.
Meets CPSC
Safety Requirements
SINCE 1954
TM
5216 Portside Dr.
Medina Ohio 44256 USA
Telephone: [phone]
Fax: [phone]
www.child-craft.com
www.foundations.com
WARNING
WARNING: Infants can suffocate on soft bedding. NEVER add a pillow
or comforter. NEVER place additional padding under an infant.
FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH.
WARNING