Chipolino FLASH User manual
This toy is produced in conformity with the requirements of Toy Safety
Directive 2009/48/EC of the European Parliament and the Council and the
applicable for the toys European standards.
IMPORTANT! RETAIN THIS INSTRUCTION MANUAL
FOR FUTURE REFERENCE!
INSTRUCTION MANUAL
FOR RIDE ON CAR WITH HANDLE
MODEL „FLASH”
1
TO GUARANTEE THE SAFE USE OF THIS PRODUCT FOLLOW
THE WARNINGS, GUIDELINES AND RECOMMENDATIONS
IN THIS MANUAL:
CAUTION! NEVER LEAVE THE CHILD UNATTENDED!
CAUTION! THIS TOY HAS NO BRAKE!
CAUTION! THIS TOY IS NOT SUITABLE FOR CHILDREN UNDER 1.5 YEARS AND WEIGHT MORE
THAN 25kg. DO NOT OVERLOAD!
CAUTION! THIS PRODUCT IS NOT A TRANSPORT MEANS!
CAUTION! DO NOT USE ON ROAD LANES!
CAUTION! KEEP AWAY FROM FIRE!
CAUTION! BEFORE USE, CHECK THE GOOD WORKING ORDER AND FIXING OF ALL PARTS.
CAUTION! TO AVOID DANGER OF INJURY, REMOVE PARENT PUSHBAR AND FOOT REST,
ONCE YOUR CHILD START TO RIDE THE TOY BY ITSELF.
Use for a child over 1.5 years of age!
Not to be used by two children simultaneously!
Adult assembly only!
The child must wear shoes at all times when using the toy! It is advisable to use helmet and
protectors.
No running or skating when pushing the ride on car with child in it.
Use only during the day and in places with good lighting.
Do not let children touch the wheels or stand close to them while the ride on car is moving!
Iftherearestickersgoingo,youmuststickthembackorremovethemtoavoidchildrenswallowing
them!
Donotusetheproductifyoundanymissingordamagedparts!
Do not use spare parts or other components, which are not supplied by the producer!
Theproducerrevokesallresponsibilityincasepartsdierentfromtheoriginaloneshavebeenused.
Do notmakechangesormodicationstothe construction!If necessary,contact theretailer oran
authorized service center for advice and repair.
Use the product only for its purpose!
Do not allow presence of children under 3 years before assembly of the product is complete, to avoid
access to small or loose parts!
Donottiestringsoraccessoriestotheproductinordertoavoidtheriskofsuocation.
Use only on even playgrounds and at a safe distance from streets or road lanes for vehicles!
Do not use the product near stairs, escalators, protrusions, swimming pools etc.!
Keepnylonpackagesawayfromchildrentoavoidriskofsuocation!
IMPORTANT! WARNINGS AND GUIDELINES FOR BATTERY USE
Do not allow children to access or play with the batteries!
Use only batteries of the designated type and power.
Donotusebatteriesofdierenttypes.
Do not mix new with used batteries.
Follow the designated polarity in the battery compartment.
Remove damaged or worn out batteries.
Remove the batteries when the product will not be used for long time.
Donotthrowthebatteriesinopenre.Donottakethebatteriestopieces.
CAUTION! Waste from depleted or unusable batteries must be disposed of separately. It is
forbidden to throw them out in containers for household waste. Dispose of the batteries only
atthespeciedplaces.
2
The toy is intended for a child over 1.5 years of age and weighing up to 25 kg!
Recommended age of the child is from 1.5 to 6 years.
When the child is sitting in it, the ride on car can be propelled by the child’s feet or by the adult pushing
the ride on car by the parent push bar
Batteries2 pcs type АА/1,5V (not included in the set)
MAIN FEATURES OF THE PRODUCT
MAIN PARTS
Please check that the described parts are available.
№Name Figure Qty
pcs №Name Figure Qty
pcs
1Car body 1 10 Steering
wheel 1
2Wheel 4 11 Decorative
cap 4
3Safety
bumper 112 Backrest 1
4Plate 1 13
Parent push
bar – upper
part
1
5Cup holder 1 14 Foot rest 1
6Anti-tip over
device 115 Rear axle 1
7Steering axle 16
Lower part of
parent push
bar
1
8Steering
wheel set 117 Canopy
support 1
9Canopy 1 18 Instruction
manual 1
1
3
ASSEMBLY UNSTRUCTIONS AND FUNCTIONS
1. ASSEMBLY OF FRONT AXLE AND STEERING WHEEL SET
2. ASSEMBLY OF THE BACKREST
WARNING! FOLLOW EXACTLY THE INSTRUCTIONS AND SEQUENCES FOR ASSEMBLY AND
USING THE PRODUCT FROM THE BELOW FIGURES.
WARNING! CHECK THE SECURITY OF FIXING AFTER PERFORMING ANY OPERATION!
Requiredtoolsforperformingsomeoperations:screwdriver(notincluded).
The toy assembly operations and functions are described below
Use the descriptions below along with the illustration bearing the same number.
1. Insert the front axle through the holes in the
steering wheel set.
2. Place the set towards opening of the car body,
asshowninthegure.
3. Fix the steering wheel set to the car body with
the screws.
Place the backrest to the hole at the rear end of
the car body and press until it locks in place.
screw
front axle
steering
wheel set
backrest
1
2
4
3. ASSEMBLY OF THE PARENT PUSH BAR
5. ASSEMBLY OF THE STEERING AXLE AND THE STEERING WHEEL
4. ASSEMBLY OF FRONT, REAR WHEELS AND ANTI-TIP OVER DEVICE
(1)Attachthelowertotheupperpartoftheparentpushbar.Inserttheplateandsecurewiththetwo
screws, the bolt and the nut.
(2)Insertthelowerpartoftheparentpushbarintothebackrestholeuntilitstops.
(3)Turnthecarupsidedownandxthepushbarwithaboltandnut.
(1) Place one wheel on each side of the front and rear axle. Insert one washer and a cotter pin.
Bend the ends of the cotter pins to secure the wheels. Finally, attach the decorative caps to the
wheels until you hear a click.
(2)Attachtheanti-tipoverdevicetotherearendofthecarbodyandsecurewithscrews.
(1)Insertthesteeringaxlethroughthetoybodyasshowninthegure.
(2)Mountthesteeringwheeltothesteeringaxlesothatitsholesmatchtheholeofthesteeringaxle
andxwiththescrewandnut.
plate
rear axle
cotter pin
washer
steering axle steering
wheel
screw and nut
wheel
decorative
cap
anti-tip over
device
lower part of
push bar
nut
bolt
(1)
(1)
(1)
(2)
(2)
(2)
(3)
screw
parent
push bar
3
4
5
5
6. ASSEMBLY OF THE FOOT REST
8. ASSEMBLY OF THE CANOPY SUPPORT AND THE CANOPY
7. ASSEMBLY OF THE SAFETY BUMPER AND CUP HOLDER
Place the footrest on the bottom of the car body
andpressasshownintheguretolockitinplace.
(1)–Mountthesafetybumpertothebackrest,asshowninthegure.
(2)–Placethecupholdertotherearsideofbackrest.Fixwithscrew.
(1)–Mountthecanopytothesupport,asshown.
(2)–Placethecanopywithsupporttothebackrestandxwithscrews.
press
canopy
support
screw
cup holder
6
7
8
(1)
(1) (2)
(2)
6
9. FUNCTIONS
Materials used: plastic, metal.
ROCFLH0210xxx / 7020684B/JY-Z06B
Starter button
Batteries:
2 AA/1.5V
Капак
Battery socket
Horn sound button
Ringtone button
Screw
9
To use the features:
1. Unscrew the cap screw using a screwdriver and remove the cap.
2. Insert
2
AA
/
1.5V
batteries,
observing
the
indicated
polarity.
3. Press the button to check if the functions are activated.
4. Attach the battery bay cover and secure it with the screw.
•
When
you
press
each
of
the
buttons
shown
in
the
gure,
you
will
hear
the
sound
of
a
starter,
the sound of a horn or various melodies.
• The ride on car is driven by the child - disassemble the footrest.
• The ride on car is operated by an adult via the parent push bar - use the mounted footrest.
CARE AND MAINTENANCE INSTRUCTIONS
Regularly check the plastic parts of the ride on car for any cracks or damage.
Regularly oil the moving parts.
Clean the toy by using a damp soft towel or sponge and a mild soap. Do not pour water on the toy.
Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or spirit.
Store the product in a clean and dry place, without moisture and at a safe distance from heat sources!
Do
not
subject
to
direct
environmental
eect
–
sun,
rain,
moisture
or
harsh
temperature
changes!
Do not use the product on muddy, sandy or gravel covered terrains, which can damage the moving
parts.
Producer: Produced for Chipolino in PRC
Importer: CHIPOLINO LTD., 1 Goliamokonarsko Shosse Str,
Plovdiv, BULGARIA; tel.: +359 32 600 889;
www.chipolino.com
Table of contents
Other Chipolino Motorized Toy Car manuals
Chipolino
Chipolino MERCEDES-AMG C63 User manual
Chipolino
Chipolino Ride On Car ATV User manual
Chipolino
Chipolino BMW User manual
Chipolino
Chipolino ATV User manual
Chipolino
Chipolino Mercedes-AMG GLE 63 User manual
Chipolino
Chipolino SUV SAFARI User manual
Chipolino
Chipolino Speed With Canopy User manual
