
5
7 – PARKING DEVICE
Press down the parking device (N), to activate it and stop the stroller.
Lift up the parking device (M), to release it and the stroller to move again.
WARNING! Always engage the parking device, when the stroller is stationary to avoid the risk of slipping
of the stroller!
8 – CANOPY
Pull the canopy to open it (1).
Push with your hand to fold the canopy (2).
WARNING! Always attach the canopy to the backrest to prevent the baby to fall and injure!
Attach the cup holder to the handle of the stroller and press, until you hear clicking sound.
9 – RESTRAINT SYSTEM (safety belts).
9-1 – Insert the belts in the central buckle (1), until you hear a „click“.
9-2 – To unfasten the belts press the central buckle (1).
9-3 – Adjust the length of the belts by sliding the buckles (2).
Remark: Belt must be snug to child’s body and must not be twisted
WARNING! Periodically check to ensure that the seat belt is securely attached to the stroller frame as
well as securely fastened. The belts should not be worn or torn, and plastic buckles and fasteners must
be sturdy, free of damage and secure.
WARNING! USE THE RESTRAINT SYTEM AT ALL TIMES SINCE THE BABY IS BORN! ADJUST THE
BELTS LENGTH ACCORDING TO BABY’S NEEDS!
10 – FOLDING THE STROLLER
IMPORTANT! Before folding the stroller, always activate the parking device; adjust the position the
backrest in the most upright position and empty the storage basket.
10-1PressbuttonDandthenbuttonE;
10-2Pressthehandleforward(2)untilthestrollergetfolded;
10-3 Lock the stroller with the transport hook (F).
11 – PULL HANDLE
The pull handle is located under the seat.
After the stroller is folded, pull out the handle with your hand (A). When handle is fully extended you
will hear a „click“.
You can use the handle to move your stroller by pulling it.
Push the handle back (B), in order to hide it.