Chipsee PPC-A9-70-C User manual

www.chipsee.com
www.chipsee.com
PPC/EPC-A9-70-C
User Manual
Release 1.0

www.chipsee.com
www.chipsee.com
Chipsee Products Naming Rules
CS10600F070E-C131
CS10600F070P-C131
CS Chipsee Product Abbreviate

www.chipsee.com
www.chipsee.com
10
Horizontal Resolution
80 Means 800 Pixel
10 Means 1024 Pixel
12 Means 1280 Pixel
14 Means 1440 Pixel
19 Means 1920 Pixel
600
Vertical Resolution
480 Means 480 Pixel
600 Means 600 Pixel
768 Means 768 Pixel
800 Means 800 Pixel
900 Means 900 Pixel
102 Means 1024 Pixel
108 Means 1080 Pixel
F(T) Product based on Freescale (TI) CPU
070
LCD Dimension
050 Means 5.0 Inch
070 Means 7.0 Inch
080 Means 8.0 Inch
097 Means 9.7 Inch
101 Means 10.1 Inch
104 Means 10.4 Inch
120 Means 12.0 Inch
150 Means 15.0 Inch
170 Means 17.0 Inch
190 Means 19.0 Inch
215 Means 21.5 Inch

www.chipsee.com
www.chipsee.com
E
Means Embedded PC or Panel PC
E Means Embedded PC without Case
P Means Panel PC with Case
C
Means Touch Type
R Means Resistive Touch
C Means Capacitive Touch
1
Means LCD Brightness
1 Means Common Brightness
2 Means High Brightness
2PCB Version
Baseboard PCB Version Number
1PCB Version
SOM Module PCB Version Number
Hardware Features
Key Features:
CPU iMX6Q,Quad-A9,1GHz
RAM 2GB DDR3
eMMC 8GB
Storage TF card, supports up to 32GB SDHC
Display 7.0 Inch LCD,1024*600 Pixel Resolution
High Brightness:500nit
Touch Capacitive Touch (Five-Point)

www.chipsee.com
www.chipsee.com
USB 3 x USB 2.0 Host,1 USB OTG
LAN 1 Channel 1000M LAN
Audio 3.5mm Audio In/Out Connector, 2W Speaker
Internal
Buzzer 1
RTC Yes
RS232 2 Channels
RS485 2 Channels *
CAN 2 Channels
GPIO None
WiFi/BT On Board WiFi/BT
HDMI 1 Channel
SATA II 1 Channel
3G/4G None
Power Input 6~36V DC
Current @ 15V 600 mA max
Power Consumption 6W Typical
Working Temperature -20°C to +70°C
OS Android, Ubuntu, Linux
Dimension CS10600F070E: 190*107.8*27.7mm
CS10600F070P: 206*135*30.1mm
Weight CS10600F070E: 380g
CS10600F070P: 680g
* This product has 5 channels of UART in total. The Bluetooth
used one channel UART by default, the default setting is

www.chipsee.com
www.chipsee.com
2*RS232+2*RS485+Bluetooth. The UART can be changed between
RS232 and RS485 easily. If you want different RS232 and RS485
setting, please contact us.
CS10600F070E-
C131

www.chipsee.com
www.chipsee.com
Figure 1 Top View (Android)

www.chipsee.com
www.chipsee.com
Figure 2 Back View
Power Input Connector
The product CS10600F070E/CS10600F070P uses a wide range power
input: DC 6~36V. The total power consumption is about 6W
normally. The Power Input Connector is 3 Pin 3.81mm Screw
Terminal Connector as Figure 5 shows. The Character “+” means
power Positive input, The Character “–” means power Negative

www.chipsee.com
www.chipsee.com
input. The Character “G” means system Ground. Table 1 has
detailed descriptions about the connector definition.
Figure 3 Power Input Connector
Table 1
Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive
Terminal
Pin 2 Negative Input Connect to DC Power Negative
Terminal
Pin 3 Ground Connect to Power System Ground
ATTENTION:
The system ground “G” has been connected to power negative “-”
on board.
CAN+RS485+RS232 Connector

www.chipsee.com
www.chipsee.com
The CAN+RS485+RS232 connector is a 16 Pin 3.81mm Screw
Terminal Connector, as Figure 6 shows. As for the definition
of every pin, please refer to Table 2.
This product has 5 channels of UART in total, they can be
configured as RS232 or RS485 freely. If you need any other
setting different to the default setting, please contact us.
Figure 6 CAN+RS485+RS232 Connector
Table 2
RS232 / RS485 / CAN Pin Definition:
Pin Number Definition Description

www.chipsee.com
www.chipsee.com
Pin 16 CAN2_H CPU CAN Channel 2 H signal
Pin 15 CAN2_L CPU CAN Channel 2 L signal
Pin 14 CAN1_H CPU CAN Channel 1 H signal
Pin 13 CAN1_L CPU CAN Channel 1 L signal
Pin 12 RS485_2- CPU UART2, RS485 –(B) signal
Pin 11 RS485_2+ CPU UART2, RS485 +(A) signal
Pin 10 RS485_5- CPU UART5, RS485 –(B) signal
Pin 9 RS485_5+ CPU UART5, RS485 +(A) signal
Pin 8 RS485_4- CPU UART4, RS485 –(B) signal
Pin 7 RS485_4+ CPU UART4, RS485 +(A) signal
Pin 6 RS232_3_RXD CPU UART3, RS232 RXD signal
Pin 5 RS232_3_TXD CPU UART3, RS232 TXD signal
Pin 4 RS232_1_RXD CPU UART1, RS232 RXD signal
Pin 3 RS232_1_TXD CPU UART1, RS232 TXD signal
Pin 2 GND System Ground
Pin 1 +5V System +5V Power Output, No more than
1A Current output.
ATTENTION:
UART2 signal has been used by Bluetooth signal on board.1.
The RS485_2 function has been disabled by default. If
customer needs to use RS485_2 function, please contact
us, we will disable the Bluetooth function.
All the CAN signal and RS485 signal have not mount on2.
the 120Ohm Matched Resistance.

www.chipsee.com
www.chipsee.com
Capacitive Touch
The product CS10600F070E/CS10600F070P uses ten-point
capacitive touch, as Figure 7 shows.
Figure 7 Capacitive Touch Connector
ATTENTION:
Capacitive touch panels are very sensitive to power noise.
Ripple voltage/current from the power adapter will cause the
LCD ripples, and will also cause the capacitive touch
malfunction: If you use the APK Multi-Touch under Android to
test, you can find the touch point float. There are several
ways to solve this problem:
1) Use a high quality power adapter. Or use battery to
provide the power like cell phone or tablet PC.
2) If user power adapter can’t be good enough, there’s
another effective method to solve this problem: Make sure the
CS12800F101P-C111 power input connector Pin 3 really connect

www.chipsee.com
www.chipsee.com
to user “Power System Ground”. This method can eliminate the
problem totally. User can also use another method to test this
problem: touch the GND of CS12800F101P-C111 by one hand, the
other hand operates on the capacitive touch screen. In this
case, user’s body acts as the Power System Ground.
USB HOST Connector
The product CS10600F070E/CS10600F070P has three USB connectors
as Figure 8 shows.
Figure 8 USB HOST Connector
USB OTG Connector
The product CS10600F070E/CS10600F070P has one USB OTG
connector as Figure 9 shows. It works as slave by default.
User can connect it to host PC by this connector.

www.chipsee.com
www.chipsee.com
Figure 9 USB OTG Connector
LAN Connector
The product CS10600F070E/CS10600F070P has one channel 1000Mbit
Ethernet Connector, as Figure 10 shows.

www.chipsee.com
www.chipsee.com
Figure 10 LAN Connector
TF Card
The product CS10600F070E/CS10600F070P has one TF (uSD) card
connector as Figure 11 shows. This device supports TF (uSD)
card up to 32GB.

www.chipsee.com
www.chipsee.com
Figure 11 TF Card Connector
ATTENTION:
The TF card slot is NOT mounted with any TF card by default.
Audio Connector
The product CS10600F070E/CS10600F070P has one Audio Input
(“Line-in”) and one Audio (“Line-out”) output, as Figure 12
shows. And the product has an internal 2W speaker.
Figure 12 Audio Connector

www.chipsee.com
www.chipsee.com
HDMI Connector
The product CS10600F070E/CS10600F070P has one HDMI connector
as Figure 13 shows. The HDMI output resolution can be
configured by software.
Figure 13 HDMI Connector
WiFi+BT
The product CS10600F070E/CS10600F070P has one WiFi+BT. It uses

www.chipsee.com
www.chipsee.com
Realtech RTL8723 which integrates WiFi and BT, as Figure 14
shows. For CS10600F070P, there is a connector on the backside
case which can connect external WiFi/BT Antenna, as Figure 15
shows.
Figure 15 WiFi+BT Antenna
Boot Switch
The product CS10600F070E/CS10600F070P has a boot switch which
can be used to change boot sequence, as Figure 16 shows. As
for the details of the boot switch, please refer to Table 3.
Figure 16 Boot Switch
Table 3

www.chipsee.com
www.chipsee.com
Boot Config Select:
Mode 1 2 3 4
TF Card 1 0 0 0
eMMC 1 1 01
Download 01 1 0
Expansion Connector
The product CS10600F070E/CS10600F070P has one Expansion
Connector, as Figure 17 shows. This connector is labelled as
P21 on the PCB, and it has connected to CPU GPIO/Camera/I2C
signals. As for the definition of every Pin, please refer to
Table 4.
Figure 17 Expansion Connector
Table 3
Boot Config Select:
Mode 1 2 3 4
TF Card 1 0 0 0
eMMC 1 1 01
Download 01 1 0

www.chipsee.com
www.chipsee.com
Table 4
Expansion Connector Definition:
PIN Function CPU PIN PIN Function CPU PIN
1 I2C2_SDA T7 2 I2C2_SCL U5
3 GPIO7_13 P6 4 GPIO7_12 R1
5 CSI0_PIXCLK P1 6 CSI0_HSYNCH P4
7 CSI0_VSYNCH N2 8 CLKO T5
9 CSI0_DAT19 L6 10 CSI0_DAT18 M6
11 CSI0_DAT17 L3 12 CSI0_DAT16 L4
13 CSI0_DAT15 M5 14 CSI0_DAT14 M4
15 CSI0_DAT13 L1 16 CSI0_DAT12 M2
17 VDD_5V0 5.0V电源输出 18 VDD_3V3 3.3V电源输出
19 GND 接地 20 GND 接地
21 GPIO1_29 W20 22 GPIO4_10 W4
23 GPIO1_28 V21 24 GPIO1_30 U20
25 I2C3_SDA D24 26 I2C3_SCL F21
27 GPIO5_2 H19 28 GPIO3_23 D25
29 GPIO3_30 J20 30 GPIO3_31 H21
ATTENTION:
All these signals connect to CPU directly. Please use it
carefully, or the CPU will be damaged easily.
Measurements and Mounting