Chipsee PPC-A9-97-C User manual

www.chipsee.com
www.chipsee.com
PPC/EPC-A9-97-C
User Manual
Release 1.0

www.chipsee.com
www.chipsee.com

www.chipsee.com
www.chipsee.com
Chipsee Products Naming Rules
CS10768F097E-C111
CS10768F097P-C111
CS Chipsee Product Abbreviate

www.chipsee.com
www.chipsee.com
10
Horizontal Resolution
80Means 800 Pixel
10Means 1024 Pixel
12Means 1280 Pixel
14Means 1440 Pixel
19Means 1920 Pixel
768
Vertical Resolution
480Means 480 Pixel
600Means 600 Pixel
768Means 768 Pixel
800Means 800 Pixel
900Means 900 Pixel
102Means 1024 Pixel
108Means 1080 Pixel
F(T) Product based on Freescale (TI) CPU
097
LCD Dimension
050Means 5.0 Inch
070Means 7.0 Inch
080Means 8.0 Inch
097Means 9.7 Inch
101Means 10.1 Inch
104Means 10.4 Inch
120Means 12.0 Inch
150Means 15.0 Inch
170Means 17.0 Inch
190Means 19.0 Inch
215Means 21.5 Inch

www.chipsee.com
www.chipsee.com
E
Means Embedded PC or Panel PC
E Means Embedded PC without Case
P Means Panel PC with Case
C
Means Touch Type
R Means Resistive Touch
C Means Capacitive Touch
1
Means LCD Brightness
1 Means Common Brightness
2 Means High Brightness
1PCB Version
Baseboard PCB Version Number
1PCB Version
SOM Module PCB Version Number
Hardware Features
Key Features:
CPU iMX6Q,Quad-A9,1GHz
RAM 2GB DDR3
eMMC 8GB
Storage TF card, supports up to 32GB SDHC
Display 9.7 Inch LCD,1024*768 Pixel,
Brightness:350nit
Touch Ten-Point Capacitive Touch

www.chipsee.com
www.chipsee.com
USB 2 x USB 2.0 Host,1 USB OTG
LAN 1 Channel 1000M LAN, Support POE（Optional）.
2nd Channel 100M Optional
Audio 3.5mm Audio In/Out Connector,2W Speaker
Internal
Buzzer 1
RTC Yes
RS232 2 Channels
RS485 3 Channels *
CAN 2 Channels
GPIO 8 Channels
WiFi/BT On Board WIFI/BT
HDMI 1 Channel
SATA II 1 Channel
4G/LTE Optional, Not Mount on by default.
Power Input 12~36V DC
Current @ 15V 600 mA max(No 4G module)
Power Consumption 7W Typical
Working
Temperature -20°C to +70°C
OS Android, Ubuntu, Linux
Dimension CS10768F097E: 226*172*26mm
CS10768F097P:256*207*29mm
Weight CS10768F097E:550g
CS10768F097P:1370g

www.chipsee.com
www.chipsee.com
* This product has 5 channels of UART in total. The Bluetooth
used one channel UART by default, the default setting is
2*RS232+2*RS485+Bluetooth.The UART can be changed between
RS232 and RS485 easily. If you want different RS232 and RS485
setting, please contact us.
CS10768F097E-
C111

www.chipsee.com
www.chipsee.com
Figure 1 Top View (Android)

www.chipsee.com
www.chipsee.com
Figure 2 Back View
CS10768F097P-

www.chipsee.com
www.chipsee.com
C111
Figure 3 Top View (Android)

www.chipsee.com
www.chipsee.com
Figure 4 Back View
Power Input Connector
The product CS10768F097E/CS10768F097P uses a wide range power
input: DC 12~36V. The total power consumption is normally
about 7W. The Power Input Connector is 3 Pin 3.81mm Screw

www.chipsee.com
www.chipsee.com
Terminal Connector, as Figure 5 shows. The Character “+” means
power Positive input, The Character “–” means power Negative
input. The Character “G” means system Ground. Table 1 has
detailed descriptions about the connector definition.
Figure 3 Power Input Connector
Table 1
Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive
Terminal
Pin 2 Negative Input Connect to DC Power Negative
Terminal
Pin 3 Ground Connect to Power System Ground
ATTENTION:
The system ground “G” has been connected to power negative “-”
on board.

www.chipsee.com
www.chipsee.com
Capacitive Touch
ATTENTION:
Capacitive touch is very sensitive to power noise. Ripple
voltage/current from the power adapter will cause the LCD
ripples, and will also cause the capacitive touch malfunction:
If you use the APK Multi-Touch under Android to test, you can
find the touch point float. There are several ways to solve
this problem:
1) Use a high quality power adapter. Or use battery to
provide the power like cell phone or tablet PC.
2) If user power adapter can’t be good enough, there’s
another effective method to solve this problem: Make sure the
power input connector Pin 3 really connect to user “Power
System Ground”. This method can eliminate the problem totally.
User can also use another method to test this problem: touch
the GND of CS10768F097P-C111 by one hand, the other hand
operates on the capacitive touch screen. In this case, user’s
body acts as the Power System Ground.
CAN+RS485+RS232 Connector

www.chipsee.com
www.chipsee.com
The CAN+RS485+RS232 connector is a 16 Pin 3.81mm Screw
Terminal Connector, as Figure 6 shows. As for the definition
of every pin, please refer to Table 2.This product has 5
channels of UART in total, they can be configured as RS232 or
RS485 freely. If you need any other setting different to the
default setting, please contact us.
Figure 6 CAN+RS485+RS232 Connector
Table 2
RS232 / RS485 / CAN Pin Definition:
Pin Number Definition Description

www.chipsee.com
www.chipsee.com
Pin 1 CAN2_H CPU CAN Channel 2 H signal
Pin 2 CAN2_L CPU CAN Channel 2 L signal
Pin 3 CAN1_H CPU CAN Channel 1 H signal
Pin 4 CAN1_L CPU CAN Channel 1 L signal
Pin 5 RS485_2- CPU UART2, RS485 -(A) signal
Pin 6 RS485_2+ CPU UART2, RS485 +(B) signal
Pin 7 RS485_5- CPU UART5, RS485 -(A) signal
Pin 8 RS485_5+ CPU UART5, RS485 +(B) signal
Pin 9 RS485_4- CPU UART4, RS485 -(A) signal
Pin 10 RS485_4+ CPU UART4, RS485 +(B) signal
Pin 11 RS232_3_RXD CPU UART3, RS232 RXD signal
Pin 12 RS232_3_TXD CPU UART3, RS232 TXD signal
Pin 13 RS232_1_RXD CPU UART1, RS232 RXD signal
Pin 14 RS232_1_TXD CPU UART1, RS232 TXD signal
Pin 15 GND System Ground
Pin 16 +5V System +5V Power Output, No more than
1A Current output.
ATTENTION:
UART2 signal has been used by Bluetooth signal on board.1.
The RS485_2 function has been disabled by default. If
customer needs to use RS485_2 function, please contact
us, we will disable the Bluetooth function.
All the CAN signal and RS485 signal are not mounted on2.
the 120Ohm matched resistance.

www.chipsee.com
www.chipsee.com
USB HOST Connector
The product CS10768F097E/CS10768F097P has two USB connectors
as Figure 7 shows. These two USB can provide 500mA current
each.
Figure 7 USB HOST Connector
USB OTG Connector
The product CS10768F097E/CS10768F097P has one USB OTG
connector as Figure 8 shows. It works as slave by default.
User can connect it to host PC by this connector.

www.chipsee.com
www.chipsee.com
Figure 8 USB OTG Connector
LAN Connector
The product CS10768F097E/CS10768F097P has one channel 1000Mbit
Ethernet Connector (LAN1), as Figure 9 shows. And this port
supports POE (Power-On-Ethernet, optional, not supported by
default). The other one channel 100Mbit Ethernet Connector is
optional.
Figure 9 LAN Connector
TF Card

www.chipsee.com
www.chipsee.com
The product CS10768F097E/CS10768F097P has one TF (uSD) card
connector as Figure 10 shows. This device supports TF (uSD)
card up to 32GB.
Figure 10 TF Card Connector
ATTENTION:
The TF card slot is NOT mounted with any TF card by default.
SIM Card Holder
The product CS10768F097E/CS10768F097P has a mini-PCIe
connector inside. The customer can mount on a 4G module to it.
Then it will need the SIM card holder, as Figure 12 shows.
There is a connector on the backside case which can connect
external 4G Antenna, as Figure 13 shows.

www.chipsee.com
www.chipsee.com
Figure 11mini-PCIe Connector&4G Module
Figure 12 SIM Card Holder
Figure 13 4G Antenna
ATTENTION:
This product is not mounted on any 4G module by default. The
Ubuntu driver for the 4G module is not available right now.

www.chipsee.com
www.chipsee.com
Audio Connector
The product CS10768F097E/CS10768F097P has one Audio Input
(“Line-in”) and one Audio (“Line-out”) output, as Figure 14
shows. And the product has an internal 2W speaker.
Figure 14 Audio Connector
WiFi+BT
The product CS10768F097E/CS10768F097P has one WiFi+BT. It uses
Realtech RTL8723 which integrates WiFi and BT. There is a
connector on the backside case which can connect external
WiFi/BT Antenna, as Figure 16 shows.