Chipsee EPC-A8-101-R User manual

www.chipsee.com
www.chipsee.com
EPC/PPC-A8-101-R
User Manual
Release 1.0

www.chipsee.com
www.chipsee.com
Chipsee Products Naming Rules
CS10600T101E-C111/R111
CS10600T101P-C111/R111
CS Chipsee Product Abbreviate
10
Horizontal Resolution
80 Means 800 Pixel
10 Means 1024 Pixel
12 Means 1280 Pixel
14 Means 1440 Pixel
19 Means 1920 Pixel

www.chipsee.com
www.chipsee.com
600
Vertical Resolution
480 Means 480 Pixel
600 Means 600 Pixel
768 Means 768 Pixel
800 Means 800 Pixel
900 Means 900 Pixel
102 Means 1024 Pixel
108 Means 1080 Pixel
T(F/U) Product based on TI(Freescale iMX6Q/ Freescale iMX6UL) CPU
101
LCD Dimension
050 Means 5.0 Inch
070 Means 7.0 Inch
080 Means 8.0 Inch
097 Means 9.7 Inch
101 Means 10.1 Inch
104 Means 10.4 Inch
120 Means 12.0 Inch
150 Means 15.0 Inch
170 Means 17.0 Inch
190 Means 19.0 Inch
215 Means 21.5 Inch
E
Means Embedded PC or Panel PC
E Means Embedded PC without Case
P Means Panel PC with Case
C
Means Touch Type
R Means Resistive Touch
C Means Capacitive Touch
1
Means LCD Brightness
1 Means Common Brightness
2 Means High Brightness
1PCB Version
Baseboard PCB Version Number
1PCB Version
SOM Module PCB Version Number
Hardware Features

www.chipsee.com
www.chipsee.com
Key features:
Key Features:
CPU AM3354ZCZ100,ARM Cortex A8, 1GHz
RAM 512MB DDR3
eMMC 4GB
Storage TF card, supports up to 32GB SDHC
Display 10.1 Inch LCD,1024*600 Pixel Resolution
Touch Capacitive Touch (10-Point) or Resistive Touch
USB 2 x USB 2.0 Host, 1x USB 2.0 OTG
(can be customized to HOST or OTG)
LAN 1 Channel 100M LAN
Audio 3.5mm Audio In/Out Connector, 2W Speaker Internal
Buzzer 1
RTC Yes
RS232 2 Channels
RS485 2 Channels
CAN 1 Channels (Can change to 2 channels)
GPIO 8 Channels,4 Input,4 Output
WiFi/BT On Board WiFi/BT. Optional. Not Mount on by Default
4G On Board 4G. Optional. Not Mount on by Default
Power Input 6~42V DC
Current @ 12V 500 mA max
Power Consumption 10W Typical
Working Temperature -20°C to +70°C
OS Android, Linux, Debian, Angstrom
Dimension CS10600T101E: 252*150*26mm
CS10600T101P: 280*187*29.5mm
Weight CS10600T101E:530g
CS10600T101P:1240g

www.chipsee.com
www.chipsee.com
CS10600T101E
Figure 1 Top View

www.chipsee.com
www.chipsee.com
Figure 2 Back View
CS10600T101P

www.chipsee.com
www.chipsee.com
Figure 3 Top View

www.chipsee.com
www.chipsee.com
Figure 4 Back View
Power Input Connector
The product CS10600T101E/CS10600T101P uses a wide range power input: DC
6~42V. The total power consumption is normally about 10W. The Power Input
Connector is 3 Pin 3.81mm Screw Terminal Connector as Figure 5 shows. The
Character “+” means power Positive input, The Character “–” means power
Negative input. The Character “G” means system Ground. Table 1 has detailed
descriptions about the connector definition.

www.chipsee.com
www.chipsee.com
Figure 5 Power Input Connector
Table 1
Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive Terminal
Pin 2 Negative Input Connect to DC Power Negative Terminal
Pin 3 Ground Connect to Power System Ground
Please note:
The system ground “G” has been connected to power Negative “–” on board.
Capacitive Touch or Resistive Touch
The product CS10600T101E/CS10600T101P uses 10-point capacitive touch or
resistive touch, as Figure 6 shows.

www.chipsee.com
www.chipsee.com
Figure 6 Resistive Touch Connector
ATTENTION:
Capacitive touch is very sensitive to power noise. Ripple voltage/current
from the power adapter will cause the LCD ripples, and will also cause the
capacitive touch malfunction: If you use the APK Multi-Touch under Android to
test, you can find the touch point float. There are several ways to solve
this problem:
1) Use a high quality power adapter. Or use battery to provide the power
like cell phone or tablet PC.
2) If user power adapter isn’t good enough, there’s another effective method
to solve this problem: Make sure the power input connector Pin 3 really
connect to user “Power System Ground”. This method can eliminate the problem
totally. User can also use another method to test this problem: touch the GND
of the product by one hand, the other hand operates on the capacitive touch
screen. In this case, user’s body acts as the Power System Ground.
CAN+RS485+RS232 Connector
The CAN+RS485+RS232 connector is a 12 Pin 3.1mm Screw Terminal Connector, as
Figure 7 shows. As for the definition of every pin, please refer to Table 2.

www.chipsee.com
www.chipsee.com
Figure 7 RS232 / RS485 / CAN Connector
Table 2
RS232 / RS485 / CAN Pin Definition:
Pin Number Definition Description
Pin 1 GND Isolated Ground Output
Pin 2 CAN_L DCAN0 of CPU,CAN L Signal
Pin 3 CAN_H DCAN0 of CPU,CAN H Signal
Pin 4 A2 UART4 of CPU, RS485 A Signal
Pin 5 B2 UART4 of CPU, RS485 B Signal
Pin 6 A1 UART2 of CPU, RS485 A Signal
Pin 7 B1 UART2 of CPU, RS485 B Signal
Pin 8 TXD2 UART1 of CPU,RS232 TXD Signal

www.chipsee.com
www.chipsee.com
Pin 9 RXD2 UART1 of CPU,RS232 RXD Signal
Pin 10 TXD1 UART0 of CPU, RS232 TXD Signal
Pin 11 RXD1 UART0 of CPU,RS232 RXD Signal
Pin 12 +5V System +5V Power Output, No more than 1A Current
output
ATTENTION:
All the CAN signal and RS485 signal have not mount on the 120Ohm Matched
Resistance.
USB Connector
The product CS10600T101E/CS10600T101P has two USB HOST connectors as Figure 8
shows.

www.chipsee.com
www.chipsee.com
Figure 8 USB HOST Connector
USB OTG Connector
The product CS10600T101E/CS10600T101P has one USB OTG connectors as Figure 9
shows.

www.chipsee.com
www.chipsee.com
Figure 9 USB OTG Connector
LAN Connector
The product CS10600T101E/CS10600T101P has one channel 100Mbit Ethernet
Connector, as Figure 10 shows.

www.chipsee.com
www.chipsee.com
Figure 10 LAN Connector
uSD Card
As in Figure 11 uSD card connector labelled as P5 on the PCB.The device
supports uSD cards up to 32GB.
Figure 11 TF Card (uSD) Connector
Please note: The uSD card Slot is NOT Mounted with any uSD card by default.

www.chipsee.com
www.chipsee.com
TF Card
The product CS10600T101E/CS10600T101P has one TF (uSD) card connector as
Figure 11 shows. This device supports a TF (uSD) card up to 32GB.
Figure 11 TF Card Connector
ATTENTION:
The TF card slot is NOT mounted with any TF card by default.
Audio Connector

www.chipsee.com
www.chipsee.com
The product CS10600T101E/CS10600T101P has one Audio Input (“Line-in”) and one
Audio (“Line-out”) output, as Figure 12 shows. And the product has an
internal 2W speaker.
Figure 12 Audio Connector
WiFi+BT
The product CS10600T101E/CS10600T101P has one WiFi+BT. It uses Realtech
RTL8723 which integrates WiFi and BT, as Figure 13 shows. For CS10600T101P,
there is a connector on the backside case which can connect external WiFi/BT
Antenna, as Figure 14 shows.

www.chipsee.com
www.chipsee.com
Figure 13 WiFi+BT Module
Figure 14 WiFi+BT Antenna
ATTENTION:
WiFi/BT module is optional, the module is NOT mounted by default.
4G Communication
The product CS10600T101E/CS10600T101P has a mini-PCIe connector inside,
customer can mount on 4G module to it, as Figure 15 shows. Then it will need
the SIM Card Holder and 4G Antenna Connector, as Figure 16 shows.

www.chipsee.com
www.chipsee.com
Figure 15 4G Module
Figure 16 SIM Card Holder and 4G Antenna Connector
ATTENTION:
This product is Not Mounted on any 4G module by default. And only Android 4.1
driver for 4G module is available at present.
GPIO
The GPIO connector is a 10 Pin 3.81mm Screw Terminal Connector, as Figure 17
shows. As for the definition of every pin, please refer to Table 3.

www.chipsee.com
www.chipsee.com
Figure 17 GPIO Connector
ATTENTION:
The GPIO has been Opto-Isolated. If you try to use the GPIO, you should
provide isolated power input. The Power Input range is 5~24V DC. The output
high Level is your Power Positive input, Low Level is your Ground Input. And
the Output it can drive 500mA current on every channel, at most. This voltage
and current are enough for most relays.
If you don’t need isolation, you can just use the power which inputs to the
Power Input Connector, you can also use the 5V voltage onboard: Just solder
on R292, R293 by 0ohm Resistor. Then the 5V voltage on-board was connected to
the “Isolated Power Input” Pin.
Table 3
GPIO Pin Definition:
Pin Number Definition
Pin 1 Isolated Power Input