Christie Cine-IPM User manual

CINE-IPM
Image Processing Module
The Cine-IPM is the preferred choice for post-production and
cinema the world over.
The Cine-IPM is a comprehensive image processor that converts
analog or digital signals when used with Christie's newest line
of digital cinema projectors. The Cine-IPM takes control of
Digital Cinema quality and displays any standard of content
regardless of source. The Cine-IPM accurately displays non-
cinema or "alternative content" such as broadcast television,
satellite, business presentations and HDTV sources.
The Cine-IPM can be configured quickly and easily for use with
the Christie DCP-H or DCP-I digital cinema projectors.
Additional input modules are compatible with virtually any
digital or analog source.
Christie's Cine-IPM offers image scaling, image processing and
reformatting capabilities of both standard and HD sources.
The Cine-IPM offers an enhanced range of software control
features: standard remote control via infrared or wired remote,
for in-theatre applications or RS422 connection.
APPLICATIONS
•Cinema and post-production
houses
•Multi-media theater
productions
•On-screen advertising
•Other large entertainment
venues
• The preferred image processing solution for film, video
post-production and cinema applications
• Advanced image scaling capabilities for all sources
• Ideal for displaying alternative content
• Suitable for satellite television rebroadcast,
corporate presentations
• Fully programmable IR Remote Control
• Illuminated LCD status display
• Supports 50 and 60 Hz graphics mode standards with
Christie's DCP-H and DCP-I projectors
• Optional input modules for HD-SDI and SDI (525/625)
• Seamless interfacing and connectivity with Christie's DCP-H
and DCP-I touch screen controller

Video Inputs
•Standard - 1 (one) RGB input - 5 BNC
with separate H and V sync, composite
sync or sync-on-green, also accepts
analog YPbPr, sync-on-Y or comp sync,
bi-level or tri-level 1 (one) analog
composite-video.
•Standard -1 (one) digital Video
Decoder module, accepts 1 (one)
composite-video source and 1 (one)
S-video with switchable termination,
accepts NTSC, NTSC 4.43, PAL, PAL M,
PAL N, SECAM.
•1 (one) option module slot. This slot
accepts a range of analog and digital
input modules for serial digital
component video (SDI), serial digital
high-definition (HD-SDI), and digital
computer signals via (DFP) Digital
Flat Panel or (DVI) Digital Video
Interface standards.
Internal processing
•10-bit
Video Output
•DVI: (1) Digital Video Interface:
standard output at 1280 x 1024,
50/60 Hz
Communication Interface Connections
•In/Out: 3 x 9-pin D-sub RS232
connectors
•6-pin XLR RS422 connection
Front Panel LCD
•Displays active source and format
display: Four line LCD display of 40
characters concurrent display of input
source type
Special Features
•Spatial dithering of graphic resource:
including HD
Power Supply
•Built-in power supply 100VAC-
240VAC, 50/60 Hz
Power Consumption
•200W
Dimensions
•6.98”H x 13.67”D x 17.25”W
•177.3mm H x 347.2mm D x 438.2mm W
Supplied Accessory
•Cine-IPM IR or Wired remote
Optional Accessories
•38-804611-01 - HD/SDI Input Module
for Cine-IPM
•38-804602-01 - SDI Input Module
for Cine-IPM
•38-804614-01 - DFP/DVI Input Module
for Cine-IPM
Cine-IPM •Specifications
•Seamless interfacing and
connectivity with DCP-H and
DCP-I touch screen controller.
•Suitable for satellite television
rebroadcast, corporate presentations.
•CINE-IPM offers an enhanced
range of software control
features.
FEATURES
WWW.CHRISTIEDIGITAL.COM
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.
Due to constant research,
specifications are subject to
change without notice.
May 02-NA
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: [phone]
FX: [phone]
Toll free: [phone] (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: [phone]
FX: [phone]
Toll free: [phone] (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: [phone]
FX: [phone]
[email protected]
SINGAPORE
PH: [phone]
FX: [phone]
[email protected]
FRANCE
PH: [phone]
FX: [phone]
Mobile: [phone]
[email protected]
GERMANY
PH: [phone]
FX: [phone]
[email protected]
CHINA
PH: [phone]
FX: [phone]
[email protected]