Christie CP2208 User manual

User Guide
020-101916-03
CP2208

NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this
document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary
depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on
information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied
warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection
with the performance or use of this material. Manufacturing facilities in Canada and China are ISO 9001 certified. Manufacturing facilities in Canada are also
ISO 14001 certified.
Warranty
Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/
warranties/ or by contacting your Christie dealer or Christie.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
ENVIRONMENTAL
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical
and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according
to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the
environment we live in!

China RoHS compliance information
关于中国《产子信息产品产染控制管理产法》的产明
•Environmentally Friendly Use Period
产保使用期限
The year number in the centre of the label indicates the Environmentally
Friendly Use Period, which is required to mark on the electronic information
product sold in China according to the China RoHS regulations.
本产志中表示的年数是根据《产器产子产品有害物产限制使用管理产法》（2016 年1 月21
日）制定的、适用于在中产人民共和国境内产售的产子信息产品的产保使用期限。
•Material Concentration Values Table
有毒有害物产含量表
Part name 部件名称 Material Concentration (有毒有害物产或元素)
产
(Pb)
汞
(Hg)
产
(Cd)
六价产
(Cr 6+)
多溴产苯
(PBB)
多溴二产苯产
(PBDE)
Backplane 底板 X O X O O O
Ballast 产流器 X O O O O O
Blower/Fan 吹产机/产扇 X O O O O O
Harness/cable 产接产产/产X O O O O O
Ignitor 点火器 X O O O O O
Illumination optics system 照明光学系产 X O X O O O
Integrated Cinema
Processor
集成产理板 X O O O O O
Internal Motor Control Board 内部产机控制板 X O O O O O
Lamp 灯泡 X O O O O O
Line filter 产波器 X O O O O O
Low voltage power supply 低产产源 X O O O O O
Mechanical enclosure* 机械附件 X O O O O O
Motorized intelligent lens
mount (optional)
智能产产产产架（产产件） X O O O O O
Projection lens 投影产产 X O X O O O
Projector Intelligence Board 智能板 X O O O O O
Sensor 产感器 O O O O O O
Standby LVPS 产用低产产源 X O O O O O
Switch 开关 X O O O O O
Touch Panel Controller 触摸控制屏 X O O O O O
Note:
This table is prepared in accordance with the provisions of SJ/T 11364.
本表格依据 SJ/T 11364 的产定产制。
O: indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.

表示产有害物产在产部件所有均产材料中的含有均在 GB/T 26572 产定的限量要求以下。
X: indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of
GB/T 26572.
表示产有害物产至少在产部件的某一均产材料中的含有超出 GB/T 26572 产定的限量要求。
* This part uses metallic alloys, which may contain Lead. 因产部件使用金属合金材料，故可能含有产。

Content
Installing and setting up............................................11
Safety precautions..................................................11
AC/power precautions..............................................12
Power cords and attachments.........................................12
Lamp precautions................................................ 12
Projector components - front........................................... 13
Projector components - rear............................................13
Lifting and positioning the projector.......................................13
Stacking projectors................................................. 13
Adjusting tilt and leveling the projector.....................................16
Installing the touch panel controller.......................................17
Installing the lens..................................................17
Installing the lamp..................................................17
Connecting power..................................................19
Connecting devices and establishing communication.............................20
Projector connections..............................................20
Connecting the projector to a computer...................................21
Turning the projector on..............................................22
Logging on to the projector............................................ 22
Activating marriage.................................................22
Adding or modifying projector communication settings........................... 22
Adding the lamp information to the lamp history...............................23
Turning the lamp on.................................................24
Aligning the lamp.................................................. 24
Adjusting the image to fit the screen...................................... 24
Aligning dual projector images.......................................... 25
Playing content....................................................26
Adjusting the image............................................... 28
Correcting keystone effect.............................................28
Correcting dual projector horizontal keystone...............................28
Correcting dual projector vertical keystone.................................29
Correcting vignetting................................................ 30
Adjusting vertical boresight............................................30
CP2208 User Guide 5
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Adjusting horizontal boresight...........................................31
Adjusting digital micromirror device convergence...............................32
Adjusting the fold mirror..............................................32
Calibrating the color.................................................32
Masking the screen edges.............................................32
Calibrating screen brightness (fL)........................................ 34
Accessing projector diagnostics..................................... 35
The touch panel controller.............................................35
Logging on to the projector............................................ 36
Viewing the status of projector components..................................37
Running the projector interrogator........................................37
Retrieving system logs...............................................37
Running a server test................................................38
Responding to alarms................................................38
Turning the projector off..............................................38
Managing the Digital Light Processing.................................39
Stopping Digital Light Processing communication...............................39
Resetting the Digital Light Processing......................................39
Running a Digital Light Processing self test...................................39
Downloading an integrated cinema processor certificate.......................... 40
Disabling the integrated cinema processor signature test..........................40
Managing lamp information......................................... 41
Creating a new lamp file..............................................41
Modifying an existing lamp file.......................................... 42
Enabling or disabling LiteLOC on a lamp file..................................42
Adjusting lamp power................................................42
Changing the lamp power percentage......................................42
Viewing lamp information............................................. 42
Receiving an alarm when a lamp reaches its expiry date.......................... 43
Adding a lamp to the Lamp History....................................... 43
Verifying current lamp intensity..........................................43
Working with channels.............................................44
Creating a new channel...............................................44
Activating a channel.................................................47
Restoring default channel settings........................................47
Content
CP2208 User Guide 6
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Changing the channel icon.............................................47
Adding or removing preferred channels.....................................47
Managing projector setting files......................................49
Creating a source file................................................49
Modifying a source file............................................... 49
Creating a screen file................................................49
Modifying a screen file............................................... 50
Creating a measured color gamut data file...................................50
Modifying a measured color gamut data file..................................51
Creating a target color gamut data file..................................... 51
Modifying a target color gamut data file.....................................51
Creating a new intelligent lens system file...................................51
Editing an existing intelligent lens system file.................................52
Enabling automatic intelligent lens system adjustments on a channel..................52
Resetting intelligent lens system file settings................................. 52
Adding a lens serial number............................................53
Enabling an automatic intelligent lens system on a lens...........................53
Resetting the lens position on projector startup................................53
Completing a full lens calibration.........................................53
Resetting the intelligent lens system and the lens position.........................54
Scheduling events................................................ 55
Scheduling the projector to turn on or off................................... 55
Editing a scheduled event............................................. 55
Deleting a scheduled event............................................ 56
Deleting all scheduled events...........................................56
Turning off the scheduler..............................................56
Viewing and modifying projector settings...............................57
Setting projector and touch panel controller preferences..........................57
Adjusting projector time settings.........................................57
Adding or modifying projector communication settings........................... 57
Adding a network device..............................................58
Accessing a network device............................................58
Calibrating the internal light meter........................................59
Viewing processes and programs running on the projector.........................59
Viewing local or remote computer settings...................................59
Viewing the files on the projector.........................................59
Content
CP2208 User Guide 7
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Viewing and modifying network connections..................................59
Viewing projector information...........................................60
Managing user accounts............................................61
Interpreting user access permissions...................................... 61
Adding a user account............................................... 61
Changing a user account password or permissions..............................62
Deleting a user account...............................................62
Backing up, restoring, and upgrading projector files......................63
Adding an upgrade file............................................... 63
Removing an upgrade file............................................. 63
Installing an upgrade file..............................................63
Backing up projector settings and information.................................64
Restoring a file....................................................64
Restoring factory default settings.........................................64
Moving files to the projector............................................65
Deleting projector files...............................................65
Test patterns.....................................................66
Adding or removing preferred test patterns.................................. 66
Turning a test pattern on or off..........................................66
Displaying a full screen test pattern.......................................66
Viewing 3D content................................................67
Display requirements................................................67
3D sync terminal pin map............................................. 67
Setting up hardware.................................................68
Creating a high frame rate 3D file........................................ 69
Editing the default 3D lamp file..........................................70
Defining a measured color gamut data file...................................70
Editing the 3D flat 1998 x 1080 channel.................................... 71
Editing the 3D scope 2048 x 858 channel....................................71
Displaying 3D diagnostic test patterns......................................72
Verifying 3D cinema content............................................72
Troubleshooting 3D................................................. 73
Reversed 3D effect (Pseudo 3D)....................................... 73
Image is too dark................................................ 73
No 3D effect....................................................74
Content
CP2208 User Guide 8
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Ghosting / cross-talk.............................................. 74
Motion artifacts..................................................74
Disturbing flashing in one eye.........................................74
Maintaining the projector........................................... 75
Inspecting ventilation................................................75
Inspecting and cleaning the lamp.........................................75
Replacing the lamp................................................. 76
Removing the existing lamp..........................................76
Installing the new lamp.............................................76
Inspecting and cleaning optics.......................................... 77
Recommended service kit........................................... 77
Cleaning the lens.................................................77
Inspecting the card cage filter...........................................78
Inspecting the light engine compartment filter................................ 78
Cleaning a washable filter............................................. 80
Replacing the lens..................................................80
Troubleshooting..................................................82
Projector functionality................................................82
Projector does not turn on...........................................82
Cannot establish communication with projector..............................82
Lamp functionality..................................................82
Lamp does not ignite.............................................. 82
Lamp suddenly turns off............................................83
LiteLOC™ not working..............................................83
Display issues.....................................................83
Flicker, shadows, or dimness......................................... 83
Blank screen with no display of cinema image...............................83
Severe motion artifacts.............................................84
Image is vertically stretched or squeezed..................................84
Inaccurate display colors............................................84
Display is not rectangular........................................... 84
Display is noisy..................................................84
Display has suddenly frozen..........................................85
Projector does not display alternate content................................85
Display is unstable................................................85
Portions of the display are cut off.......................................85
Inconsistent picture quality.......................................... 85
Content
CP2208 User Guide 9
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Touch panel controller issues........................................... 86
Touch panel controller fails to initialize................................... 86
Button presses on the touch panel controller are not registering correctly............. 86
CP2208 Specifications............................................. 87
Physical specifications................................................87
Power specifications.................................................87
Environmental specifications............................................88
Display specifications................................................88
Control signal compatibility............................................ 89
Touch panel controller specifications.......................................90
Lamp specifications.................................................90
Accessories...................................................... 91
Regulatory.......................................................92
Safety....................................................... 92
Electro-magnetic compatibility........................................ 92
Environmental.................................................. 92
Content
CP2208 User Guide 10
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Installing and setting up
This manual is intended for professionally trained operators of Christie high-brightness projection
systems. These operators are qualified to replace the lamp and air filter, but should not attempt to
install or service the projector
Only Christie qualified technicians who are knowledgeable about the hazards associated with high-
voltage, ultraviolet exposure, and the high temperatures generated by the projector lamp are
authorized to assemble, install, and service the projector. In addition, only Christie accredited
personnel are authorized to perform security procedures such as marriage.
Learn how to position and install the projector.
Safety precautions
Observe these important safety rules to avoid personal injury or damage to the projector.
This projector must be operated in an environment that meets the operating range, as listed in the
projector specifications (on page 87).
General precautions
Warning! If not avoided, the following could result in death or serious injury.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
• High leakage current present when connected to IT power systems.
•
• For protection from ultraviolet radiation, keep all product housings intact during operation.
• UV EXPOSURE! Protective UV safety glasses with side shields and Christie approved protective
safety clothing must be worn when performing optical adjustments or servicing the product.
• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
• A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
CP2208 User Guide 11
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Power
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
•
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• Install the product near an easily accessible AC receptacle.
Lamp
Warning! If not avoided, the following could result in death or serious injury.
• EXPLOSION HAZARD! Lamps and bare bulbs, even when packaged, may explode if dropped or
mishandled.
• EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves,
jacket, face shield) whenever the lamp door is open or when handling the lamp. Any local or
federal specifications take precedence over Christie's protective clothing recommendations.
• Do not open the lamp door while the lamp is on.
• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
• Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
AC/power precautions
Power cords and attachments
Lamp precautions
Installing and setting up
CP2208 User Guide 12
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Projector components - front
Learn about the components on the front of the projector
.
A Touch panel
A touch-sensitive screen used to control the
projector.
E Air filter cover and air filter
Located behind the air filter cover is a
replaceable air filter.
B Communications panel
External devices are connected here.
F Projector lens
A list of available lenses is available in the
projector specifications.
C Adjustable feet
Turn the adjustable feet to increase or
decrease the projector height.
G Lens surround
D Air Filter H Top lid
Projector components - rear
Learn about the components on the back of the projector
.
A Service access door
B Power cord and AC receptacle
C Light source access door
Lifting and positioning the projector
Safely lift and position the projector in the location where it will be used.
Warning! If not avoided, the following could result in death or serious injury.
• Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
Position the projector so it is centered and parallel with the theater screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
Stacking projectors
To stack CP2208 projectors, use the stacking kit provided.
The stacking kit includes these parts:
Installing and setting up
CP2208 User Guide 13
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Locking bracket (quantity 4) Stacking cup (quantity 4) M6 screw (quantity 4)
When stacking projectors, the optical axis of the projectors must be parallel to one another. The
maximum tilt for stacked projectors is 13 degrees. When you install the stacked projectors in a rack
stand or on a pedestal, the rack stand or the pedestal must remain horizontal. If you require tilt to
align your images, you must tilt the projectors and not the rack stand or pedestal.
1. On the bottom projector, remove the four corner screws securing the top lid.
2. Position a single stacking cup (011-104349-XX) over one of the empty screw holes so the
higher side of the cup faces outward and aligns with the projector skin.
Installing and setting up
CP2208 User Guide 14
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

3. Insert an M6 screw (012-101132-XX) through the stacking cup mounting hole and into the
projector.
4. With a torque wrench, tighten the M6 screw to 15 in-lb.
5. Repeat steps 3 to 5 to install the three remaining stacking cups.
6. With the assistance of another person, lift the second projector and position it on top of the
bottom projector so each of its feet fit into a stacking cup. The lenses of both projectors must
face the same direction and the optical axis of both projector lenses must be parallel (A) and
align vertically (B).
7. Install both projectors.
a) Install the touch panel controller.
b) Install the lens.
c) Install the lamp.
d) Connect devices to the projector.
e) Connect power.
f) Adjust the bottom projector image to fit the screen. .
Installing and setting up
CP2208 User Guide 15
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

g) Align the top projector image to the bottom projector image. .
8. When both projectors are installed and aligned correctly, install the locking brackets on the
feet of the top projector.
a) Slide the locking bracket (011-104470-XX) over the flat sides of the stacking cup, so the
notch in the locking bracket fits around the projector leg and above projector foot nut.
b) Turn the locking bracket so the flanges of the locking bracket fit tightly below the stacking
cup tabs.
c) Repeat steps a and b to install the three remaining locking brackets.
Adjusting tilt and leveling the projector
To ensure optimum performance, install the projector so it is centered and parallel with the screen.
To compensate for tilt or offset, you can adjust the projector feet and the lens mount position.
1. To adjust the height of the projector, loosen the lock nut on the adjustable feet on the bottom
of the projector.
A
B Lock
C Turn to adjust height
2. Extend or retract the feet.
3. When the adjustment is correct, tighten the lock nut.
Installing and setting up
CP2208 User Guide 16
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Installing the touch panel controller
Attach the touch panel controller to the projector.
1. Attach the mounting bracket to the touch panel controller using the three M4 screws and the 3
mm hex driver provided.
2. Slide the mounting bracket into the bracket support.
3. Connect the connector from the touch panel controller to the port on the of the projector.
Installing the lens
The lens seals the projection head, preventing contaminants from entering the main electronics area.
Do not operate the projector without a lens installed. Install a lens plug when you install or transport
the projector.
Remove the lens caps from the front and rear of the lens.
Lens caps must be removed or they can melt and damage the lens.
Installing the lamp
Complete the following procedure to install the lamp.
Warning! If not avoided, the following could result in death or serious injury.
• This procedure must be performed by Christie qualified technicians.
• EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves,
jacket, face shield) whenever the lamp door is open or when handling the lamp. Any local or
federal specifications take precedence over Christie's protective clothing recommendations.
• Do not open the lamp door while the lamp is on.
• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
• EXPLOSION HAZARD! Lamps and bare bulbs, even when packaged, may explode if dropped or
mishandled.
1. If the projector is operating, turn it off and allow it to cool a minimum of 15 minutes.
2. Turn the breaker switch for the projector off.
3. Disconnect the projector from AC power.
4. Disconnect the touch panel communication cable from the rear of the projector.
5. Remove the from the rear of the projector.
6. Put on your protective clothing, face shield, and gloves.
7. Insert the key in the lamp door lock, turn the key, and then open the lamp door.
8. Loosen the two thumbscrews and open the firewall door.
9. Loosen the two thumbscrews and open the lamp access door.
10. Loosen the cathode clamp with the 5 mm hex key attached to the lamp door.
Installing and setting up
CP2208 User Guide 17
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

11. For CDXL-14 or CDXL-16 lamps:
Warning! If not avoided, the following could result in death or serious injury.
• EXPLOSION HAZARD! Handle a lamp by the cathode and anode end shafts only. Do not
handle the lamp by the glass.
• EXPLOSION HAZARD! Do not over-tighten the lamp.
• EXPLOSION HAZARD! Do not stress the glass of a lamp or bare bulb in any way.
a) Install the lamp extension nut on the cathode clamp. To provide access to the locking
screw on the extension nut, rotate the extension nut until the locking screw faces upward
toward the projector lid.
The extension nut is only used with CDXL-14 and CDXL-16 lamps.
b) Thread on and hand-tighten the cathode nut. Ensure the smooth portion of the nut is
against the cathode clamp.
c) Hold the anode end of the new lamp in your left hand and angle it up through the hole in
the back of the reflector assembly. Insert your right index and middle finger through the
back of the reflector and thread the cathode end of the lamp into the extension nut.
Check all leads. When threading the lamp into the extension nut, make sure the anode (+)
wire does not touch any projector metal, such as the reflector or firewall.
d) Tighten the extension nut screw.
e) Move to step 13.
12. For CDXL-19SC or CDXL-21S1 lamps:
a) Hold the anode end of the new lamp in your left hand and angle it up through the hole in
the back of the reflector assembly.
b) Insert your right index and middle finger through the back of the reflector and guide the
lamp onto the cathode clamp.
Be careful not to hit the lamp against the reflector.
c) Thread on and hand-tighten the cathode nut. Ensure the smooth portion of the nut is
against the cathode clamp.
d) Tighten the cathode screw (D) with a hex key.
13. Align the ring terminal on the anode wire with the mounting position ensuring the crimped side
of the wire is facing out.
14. Tighten the anode screw.
15. Route anode lead away from nearby metal surfaces.
16. Close the lamp access door and tighten the two thumbscrews.
17. Close the fire wall door and tighten the two thumbscrews.
18. Close and lock the rear access door. Ensure the hex key is placed back into its holder before
closing the rear access door.
Installing and setting up
CP2208 User Guide 18
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Connecting power
Connect the projector to the power source.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product
by Christie qualified technicians or electricians before it can be connected to power.
• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
•
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• The appliance coupler and main power supply plug must be easily accessible for disconnecting
the product from the power source.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• Install the product near an easily accessible AC receptacle.
• For products containing surge suppressors, you must adhere to the installation and power
requirements.
Installation and Power Requirements
The protected earth wire must be green/yellow 12 AWG minimum.
You must use a 20A branch circuit breaker for Input A.
1. If the projector is operating, turn it off and disconnect it from AC power.
2. Loosen the threaded bolt on the ground lug on the AC receptacle on the rear of the projector.
3. Remove 15 mm of insulated covering from both ends of the protected earth wire.
4. Insert a bare end of the protected earth wire into the hole on the top of the ground lug so it is
beneath the threaded bolt.
5. Tighten the threaded bolt to 50 in-lb.
6. Connect the other bare end of the protected earth wire to the building ground.
7. Connect one end of the projector power cord to the AC receptacle on the lower-left rear corner
of the projector and then connect the other end of the power cord to an AC receptacle.
8. If you are using an Uninterrupted Power Supply (UPS) to power the main electronics, move the
AC switch to A + B and connect the power cord provided with the UPS to the B outlet.
Installing and setting up
CP2208 User Guide 19
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.

Connecting devices and establishing
communication
To display content, you must connect a device that is capable of storing or playing content to the
projector.
Projector connections
Item Description
A Indicates the status of the regulator. A solid blue LED indicates the regulator is enabled. If the LED is
not illuminated, the regulator is not enabled.
B•SOFTST—(Software State) Indicates the state of the software application running on the
integrated cinema processor (ICP). During normal operation, this LED blinks. During start up, the
LED changes from off to blinking.
•OSST—(Operating System State) Indicates the state of the ICP operating system. During normal
operation, the LED is green. During start up, the LED changes from off to green.
•FMTST—(FMT FPGA State) Indicates the state of the FMT FPGA circuit. During normal operation,
the LED is green. When the power is turned on, the LED turns green immediately.
•ICPST—(ICP FPGA State) Indicates the configured state of the ICP FPGA circuit. During normal
operation, the LED is green. When the power is turned on, the LED turns green immediately.
C•PORT B—Indicates the status of the USB port. A green LED indicates the port is active. If the
LED is not illuminated, the port is inactive.
•PORT A— Indicates the status of the USB port. A green LED indicates the port is active. If the
LED is not illuminated, the port is inactive.
D•STBY—The LED is green when the standby power supply is active. If the LED is not illuminated,
the standby power supply has failed or the projector circuit breaker is off.
Installing and setting up
CP2208 User Guide 20
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.