Christopher Ward C1 Morgan 3 Wheeler User guide

C1 Grand Malvern
Jumping Hour
Owner’s handbook

1
Time on your side...
Introduction
Contents
C1 Grand Malvern Jumping Hour 2–3
Technical information 4–5
How to operate your C1 Jumping Hour 6–10
Our watch care programme 11
Keeping in touch 12
Your Christopher Ward watch has been designed
and engineered by experts to ensure not only precise
timekeeping, but also to give you a sense of pride
whenever you wear it.
You’ve made an investment, a good one, and the
aim of this handbook is to help you make the most of
it during what I hope will be a lifetime of ownership.
Christopher Ward

2
C1 Grand Malvern Jumping Hour
C1 Grand Malvern Jumping Hour
Since its introduction in 2011, the Jumping
Hour has always been one of our most
distinctive watches.
Its appeal is easy to explain: with a minute hand
complimented by an hour wheel visible through an
aperture at 12 o’clock, the essence of reading the time
is stripped down to a beautifully simple level. For a
range founded on the promise of oering interesting
horological complications, it was only right for the
Jumping Hour to become the next entry into our
C1 Grand Malvern collection.
In joining our premium range, the Jumping Hour has
undergone some changes: it has received our signature
case design; a curved double-top sapphire crystal;
a selection of premium nishes for the domed dial,
plus a wide bevelled aperture at 12 that captures the
light beautifully. These changes – developed by Senior
Designer Adrian Buchmann – bring modern nuance to
a design already celebrated for its minimalist charm.
However, appearances can deceive. Inside the C1,
Johannes Jahnke’s modication of an Sellita SW200-1
movement – known as Calibre JJ01 – has created one
of the most accurate jumping hour complications
available anywhere in the world. And therein lies
the Jumping Hour’s appeal: its design may be borne
of English ideals, but its movement is the nest
Swiss craftsmanship. The result is a watch that is
as beautiful on the outside as it is innovative within.

3

4
C1 Grand Malvern Jumping Hour
Features
• Swiss made
• Bespoke ‘Calibre JJ01’ Jumping Hour module hand-
built on Sellita SW 200-1 automatic movement
• Polished surgical-grade stainless steel case with
brushed sides
• Push-down crown with twin ag motif
• Anti-reective double curve top sapphire crystal
• Domed Opalin or Sunray nish dial
• Curved, multi-faceted brushed and polished steel
and blued steel minute hand
• Screw-in exhibition case back with engraved
serial number
• Italian Shell Cordovan strap with Bader deployment
or ‘Milanese’ mesh bracelet
• Luxury presentation case and owner’s handbook
Technical information
Technical
Diameter: 40.5mm
Height: 12.65mm
Weight: 62g
Calibre: Sellita SW 200-1 with bespoke
Calibre JJ01 module
Case: 316L stainless steel
Water Resistance: 3 ATM (30 metres)
Vibrations: , per hour (Hz)
Timing tolerance: 15 secs per day
Lug to lug: 48.55mm
Strap: 20mm

5

6
How to operate your C1 Grand Malvern Jumping Hour
Setting the time
The crown should sit ush to the case
(position
1 ) in order to maintain water
resistance.
• To re-power the watch after a period
of non-use, simply wind the crown in
a clockwise direction.
• To set the time pull out the crown
gently into position
2 . Turn the crown
in a clockwise direction until you
reach the correct time e.g. 10.08 hr.
For precise time setting it is
recommended you pass beyond the
desired minute and to set the hand
backwards.
12
1. Manual winding
2. Time setting

77

8
As you would expect, we place as much
emphasis on the quality of our straps and
bracelets as we do our watches. We only use
the nest leathers for our straps. Similarly, we
only use the nest metals in the construction
of our bracelets, all of which are precision
engineered for durability, eciency and comfort.
The following guidelines explain how easy
it is to use and adjust your Christopher Ward
strap.
1.
Press to release.
2.
Pull open the clasp
and locate the opening.
3.
Thread the strap through
the opening to the desired
position. Close the clasp.
Leather strap with Bader deployment
Straps and bracelets
How to operate your C1 Grand Malvern Jumping Hour

9
How to operate your C1 Grand Malvern Jumping Hour
9
Using the quick-release pins on your strap
1. Locate the quick-release pin on your strap.
Pull the pin to the side to detach your strap.
2. To reattach your strap, align the pins to the
lug holes and click the strap into position.
Repeat for the other side.