Chronomite INSTANT-FLOW SR Series Specification sheet

IFSR 09/06/18
®
INSTANT-FLOW SR - STANDARD FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
®
Instant-Flow SR - Standard Flow
â Space saving compact size:
6-1/4" (H) x 9-5/8" x 2-3/4"
(159 (H) x 244 x 70mm)
â Meets applicable building codes
including ADA, UL, IAPMO, UPC, CSA.
â Made in the U.S.A.
â Saves water and energy - 99% energy efficient
â Unlimited hot water
â Vandal resistant rugged cast aluminum housing
â Environmentally friendly
PRODUCT FEATURES
Housing is fabricated from rugged cast aluminum alloy.
®
Chronomite Instant-Flow SR- Standard Flow models are
manufactured to provide reliable point-of-use hot water.
There is no pressure and temperature relief valve
needed (unless required by code), saving time and
money on installation.
Heating coils are nichrome.
Element assembly is fabricated from Celcon plastic.
Faucet flow controls are supplied with each unit. 3/8”
compression fittings are supplied (standard). Optional
1/2” and 3/4” male NPT water connections available.
GUIDE SPECIFICATION
Member of
U.S.Green
Building Council
Water
Conserving
Product
SR - _______ / _______
AMPS VOLTS
For the model being selected, please place the
corresponding amps, volts and temperature rise values
in the Guide Specifications to the right.
APPLICATION: commercial, industrial,
residential, lavatory, shower, kitchen/bar sink,
service sink, scrub sink
Tankless Water Heater shall be a Chronomite
Laboratories Model
m Satin Finish Stainless Steel Housing (SS)
m High Polish Finish Stainless Steel (SSP)
with Amps and Volts
to heat 1.0 GPM (3.8 LPM) at a temperature rise of
°F
m PA 765 ABS Housing (P)
m Pressure & Temp Relief Valve Assembly (TP)
m 1/2” Male NPT (NPT08)
Unit shall be provided with Celcon waterways, and
Nichrome heating coils
OPTIONS
m Disconnect Switch, Rotary 40A - Lockable
Nema 4X (2095-1)
OPTIONS
_____
Made in
the USA
Complies
with
Standards
for:
17451 Hurley St. :: City of Industry, CA 91744 U.S.A.
Phone [phone] :: 626-937-4270
Fax [phone] :: www.chronomite.com
1.00 GPM 1.25 GPM 1.50 GPM
SR-30/208 30 208 6240 0.65 43 34 28
SR-30/240 30 240 7200 0.65 49 39 33
SR-30/277 30 277 8310 0.65 57 45 38
SR-40/208 40 208 8320 0.65 57 45 38
SR-40/240 40 240 9600 0.65 66 52 44
°F TEMPERATURE RISE @
MODEL AMPS VOLTS WATTS ACTIVATION
GPM
LISTED TO:
UL STD 499
CERTIFIED TO:
CAN/CSA STD C22.2 NO. 88
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

IFSR 09/06/18
®
INSTANT-FLOW SR - STANDARD FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
SELECTION SUMMARY
& APPROVAL FOR
MANUFACTURING
Model Number & Options_____________________________________________________________________Quantity_______________
Company_______________________________________________________________________________________________________
Contact_________________________________________________Title____________________________________________________
Signature
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
PH. 800-447-4962
626-937-4270
FAX [phone]
www.chronomite.com
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
TECHNICAL DIMENSIONS
—120V models when operated 110V will have approximately a 15%
temperature decrease.
GENERAL NOTES:
—240V models when operated at 220V will have approximately a 15%
temperature decrease.
Materials: Rugged cast aluminum housing
Celcon plastic element assembly
with nichrome coils
Maximum Ambient Operating Temperature: 60°C
Maximum Water Temperature: 71°C
Housing Color: White
Listing: UL, IAPMO, UPC, ADA, ETL
®
INSTANT-FLOW SR - STANDARD FLOW
Dimensions: 159 (H) x 244 x 70mm
Maximum Pressure: 1034 kPa
Weight: 2.27 Kg
Minimum Operating Flow Rate: 2.5 LPM
Minimum Operating Pressure: 172 kPa
Maximum Operating Pressure: 552 kPa
4.00 LPM 5.00 LPM 6.00 LPM
SR-30/208 30 208 6240 2.5 22 18 15
SR-30/240 30 240 7200 2.5 26 21 17
SR-30/277 30 277 8310 2.5 30 24 20
SR-40/208 40 208 8320 2.5 30 24 20
SR-40/240 40 240 9600 2.5 34 28 23
°C TEMPERATURE RISE @
MODEL AMPS/PHASE 1 Æ VOLTAGE WATTS ACTIVATION
LPM
INSTANT-FLOW SR - STANDARD FLOW METRIC CHART
®
257
29
33
29 70
Ø28 Access Hole
146
6
6244 4x Ø5
84
51
159
70
159
Rear Electrical Knock-Out
Front Service Panel

IFSR 09/06/18
®
INSTANT-FLOW SR - STANDARD FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
TECHNICAL DIMENSIONS
Minimum Operating Flow Rate: 0.65 GPM
Maximum Ambient Operating Temperature: 140°F
Maximum Pressure 150 PSI
Materials: Rugged cast aluminum housing
Celcon plastic element assembly
with nichrome coils
Maximum Operating Pressure: 80 PSI
Housing Color: White
®
INSTANT-FLOW SR - STANDARD FLOW
Listing: UL, IAPMO, UPC, ADA, ETL
Minimum Operating Pressure: 25 PSI
Weight: 5 lbs.
Dimensions: 6-1/4" (H) x 9-5/8" x 2-3/4"
Maximum Water Temperature: 160°F
INSTALLATION DIAGRAM
WIRING CONNECTION
"GRD" is
earth
ground.
Conduit
Refer to local
code for wire size
Hot
Hot or
Neutral
ATTENTION:
Unit must be hard wired.
NOTE: Heaters are single phase.
All tests are measured at
the output of the heater.
—120V models when operated 110V will have approximately a 15%
temperature decrease.
GENERAL NOTES:
—240V models when operated at 220V will have approximately a 15%
temperature decrease.
SELECTION SUMMARY
& APPROVAL FOR
MANUFACTURING
Model Number & Options_____________________________________________________________________Quantity_______________
Company_______________________________________________________________________________________________________
Contact_________________________________________________Title____________________________________________________
Signature
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
PH. 800-447-4962
626-937-4270
FAX [phone]
www.chronomite.com
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.
OR
Notes:
1. Heater to be installed below the level of all hot water
outlets serviced by the heater.
2. Diagram shown with standard 3/8" Compression Fitting.
Optional 1/2" Male NPT water connections available.
1 Instant-Flow SR Heater
2 Electrical Junction Supply Box (optional)
2A 2095-1 Disconnect Switch (optional)
3 Electrical Supply Conduit
4 Electrical Supply Wire
5 Dual outlet Stop, 3/8" Comp.
6 3/8" Comp. x 1/4" NPT
7 3/8" Hot Water Outlet
8 3/8" Cold Water Inlet
2
6
4
3
1
2A
5
8
7
Outlet Connections
Fittings (supplied)
101
8"
11
8"
15
16"
11
8"
23
4"
53
4"
1
4"
1
4"95
8"
35
16"
2"
61
4"
23
4"
61
4"
Rear Electrical Knock-Out
Front Service Panel
Ø1 3
32" Access Hole
4x Ø 3
16"