Chronomite INSTANT-FLOW MICRO MIX Series Specification sheet

MM-LF 09/06/18
® ™
INSTANT-FLOW MICRO MIX - LOW FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
PRODUCT FEATURES
GUIDE SPECIFICATION
Member of
U.S.Green
Building Council
Water
Conserving
Product
M - ___L / _____- MM
AMPS VOLTS
Tankless Water Heater shall be a Chronomite Laboratories
Model
Unit shall be provided with, microprocessor, Celcon
waterways, Nichrome heating coils, and an IAPMO certified
AP-12 Mixing Valve Assembly meeting ASSE 1070-2004
compliancy. Hot water storage vessel and simple analog
temperature controller are expressly prohibited.
m Satin Finish Stainless Steel (SS)
m High Polish Finish Stainless Steel (SSP)
m PA 765 ABS (P)
with Amps and Volts
to heat 0.4 GPM to a preset temperature of 104°F.
OPTIONAL HOUSING FINISH
e.g. Model M-30L/120-MM with 30 Amps, 120 Volts heat
0.4 GPM to preset temperature of 104°F.
â Saves water and energy - 99% energy efficient
â Works with low flow application
â Vandal resistant rugged cast aluminum housing
â Meets applicable building codes including
ADA, UL, IAPMO, UPC.
â The combination of any Chronomite IAPMO certified
microprocessor instantaneous water heater and the
Chronomite IAPMO certified mixing valve assembly AP-12,
when installed per the instructions, complies with ASSE
1070-2004. Reference IAPMO R&T Certificate no. 7257.
Regulation pertaining to limiting risk of scalding.
â Unlimited hot water
â Made in the U.S.A.
â Space saving compact size:
6-1/4" (H) x 9-5/8" x 2-3/4"
â Uses a digital microprocessor for temperature control
Ultra quick response times for temperature variations -
120 times per second. Microprocessor use is the most energy
efficient means of heating water
â Environmentally friendly
Housing is fabricated from rugged cast aluminum alloy.
Coils are Nichrome.
Element assembly is fabricated from Celcon plastic.
Chronomite Instant Flow® Micro Mix - Low Flow models are
manufactured to provide reliable point-of-use hot water at 0.4
GPM with a minimum pressure of 25 PSI.
The AP-12 valve assembly consists of IAPMO certified mixing
valve, appropriate piping and fittings. Reference IAPMO R & T
certificate #7257
Faucet flow control and compression fittings are supplied
with each unit.
Instant Flow® Micro Mix - Low Flow
Made in
the USA
APPLICATION: commercial, industrial,
public lavatories, kitchen/bar sink
_____
OPTION
17451 Hurley St. :: City of Industry, CA 91744
Phone [phone] :: 626-937-4270
Fax [phone] :: www.chronomite.com
Complies
with
Standards
for:
Federal
Public Law
111-380
(No Lead)
M-15L / 277-MM 15 277 4150 0.35 35 28 -
M-20L / 120-MM 20 120 2400 0.35 20 - -
M-20L / 208-MM 20 208 4160 0.35 36 28 -
M-20L / 240-MM 20 240 4800 0.35 41 33 -
M-20L / 277-MM 20 277 5540 0.35 47 38 -
M-30L / 120-MM 30 120 3600 0.35 31 25 -
M-30L / 208-MM 30 208 6240 0.35 53 43 21
M-30L / 240-MM 30 240 7200 0.35 61 49 25
M-30L / 277-MM 30 277 8320 0.35 71 57 28
M-40L / 208-MM 40 208 8320 0.35 71 57 28
M-40L / 240-MM 40 240 9600 0.35 82 66 33
TEMP RISE @
1.00 GPM
TEMP RISE @
2.00 GPM
MODEL AMPS VOLTS WATTS TEMP RISE @
0.80 GPM
ACTIVATION
GPM
For the model being selected, please place the corresponding
amps and volts values in the Guide Specifications to the right.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MM-LF 09/06/18
® ™
INSTANT-FLOW MICRO MIX - LOW FLOW
ELECTRIC TANKLESS WATER HEATER - POINT OF USE
Get Started www.mgispecbuilder.comConfigure products and create specs with ease.
SELECTION SUMMARY
& APPROVAL FOR
MANUFACTURING
Model Number & Options_____________________________________________________________________Quantity_______________
Company_______________________________________________________________________________________________________
Contact_________________________________________________Title____________________________________________________
Signature
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
PH. 800-447-4962
626-937-4270
FAX [phone]
www.chronomite.com
TECHNICAL DIMENSIONS
INSTALLATION DIAGRAM
WIRING CONNECTION
"GRD" is
earth
ground.
Conduit
Refer to local
code for wire size
Hot or
Neutral
Hot or
Neutral
ATTENTION:
Unit must be hard wired.
NOTE: Heaters are single phase.
All tests are measured at
the output of the heater.
!The microprocessor adjusts the heater's power for variations in flow
rates, inlet water temperature and pressure to assure the selected
factory preset water temperature.
!GENERAL NOTES:
!240V models when operated at 220V will have approximately a 15%
wattage decrease.
1/4"
9-5/8"
5-3/4"
ø 3/16", 4 Mounting Holes
1/4"
Front Service Panel
!Microprocessor limits temperature increase according to the pre
selected temperature.
!The combination of Chronomite’s IAPMO certified instantaneous
water heater and the Chronomite’s IAPMO certified valve assembly
AP-12, when installed per the instructions, complies with ASSE
1070. Reference: IAPMO R&T Certificate no. 7257.
Minimum Operating Flow Rate: 0.35 GPM
Housing Color: White
INSTANT-FLOW® MICRO MIX™ - LOW FLOW
Weight: 6 lbs.
Maximum Pressure: 150 PSI
Minimum Operating Pressure: 25 PSI
Maximum Operating Temperature: 160°F
Listing: UL, IAPMO, UPC, ADA, ETL
Dimensions: 6-1/4" (H) x 9-5/8" x 2-3/4"
Maximum Operating Pressure: 80 PSI
Materials: Rugged cast aluminum housing, Celcon
plastic element assembly with Nichrome
coils and AP-12 mixing valve assembly
Electrical
Knock-Out
Behind Unit
ø 1" Access Hole
1-1/8"
2-3/4"
10-1/8"
1-1/8"
1-5/16"
AP-12 Mixing
Valve Assembly
17-1/4"
Acorn Family of Companies
Micro Mix
Heater
J-Box
Mounting
Flanges (4)
3/8"
Cold Water
Faucet Feed
5/8" x 3/8" x 3/8"
Three Way Angle
Stop Valve
3/8" Cold Water Inlet
Note: Heater to be
installed below the level
of all hot water outlets
serviced by the heater
3/8" Hot
Water Faucet
Feed
Compression Fittings (2)
Chronomite Laboratories assumes no responsibility for use of void or suspended data. © Copyright Chronomite Laboratories, Inc.
Member of Morris Group International, City of Industry, CA Please visit www.chronomite.com for most current specifications.