CIS VCC-16MV02 Quick start guide

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
Camera Link I/F
12M pixels CMOS B/W Camera
VCC-16MV02
(Dedicated model for Dongguan Mivision Technology Co. Ltd.)
Product Specifications
& Operational Manual
CIS Corporation
Dongguan Mivision Technology Co. Ltd. Receipt Signature
Approved by
Sales
Prepared by

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
1
Revision History
Rev. No.
Date issued
Revision details
-00
2018/6/12
First issue.

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
2
Table of Contents
PAGE
1. Handling Precautions .......................................................................................................................................4
2. Product Outline ...............................................................................................................................................5
3. System Configuration.......................................................................................................................................5
3.1. Camera ...................................................................................................................................................5
3.2. Optional Accessories ................................................................................................................................5
3.3. Free Software ..........................................................................................................................................5
3.4. Packaging................................................................................................................................................5
4. Specifications ..................................................................................................................................................6
4.1. General Specifications ..............................................................................................................................6
4.2. Camera Input and Output Signals Specifications .........................................................................................7
4.3. CMOS Spectral Response ..........................................................................................................................8
4.4 Video Output Format ................................................................................................................................8
5. Camera Function Settings............................................................................................................................... 10
5.1. The List of Preset Shutter ....................................................................................................................... 12
5.2. Formula to Calculate Manual Shutter Values ............................................................................................. 12
5.3. Manual Shutter Settings with FAST Trigger Mode (CLK Sync Mode)............................................................. 13
5.4. Notes for Function Settings ..................................................................................................................... 13
6. External Connector Pin Assignment ................................................................................................................. 13
6.1. 12pins Circular Connector HR10-10R-12PA(73) (HIROSE) or equivalent ..................................................... 13
6.2. Camera Link Connector 12226-1100-00PL (SUMITOMO 3M)....................................................................... 14
6.3. PoCL Selection Switch (SW1) .................................................................................................................. 14
7. Timing Chart ................................................................................................................................................. 15
7.1. Horizontal Sync. Timing (2Tap Configuration mode) .................................................................................. 15
7.2. Vertical Sync. Timing (2Tap Configuration mode) ...................................................................................... 15
7.3. Horizontal Sync. Timing (4Tap Configuration mode) .................................................................................. 16
7.4. Vertical Sync. Timing (4Tap Configuration mode) ...................................................................................... 16
7.5. Horizontal Sync. Timing (8Tap Configuration mode) .................................................................................. 17
7.6. Vertical Sync. Timing (8Tap Configuration mode) ...................................................................................... 17
7.7. Horizontal Sync. Timing (10Tap Configuration mode) ................................................................................ 18
7.8. Vertical Sync. Timing (10Tap Configuration mode) .................................................................................... 18
7.9. Fixed Trigger Shutter Mode ..................................................................................................................... 19
7.10. FAST Fixed Trigger Shutter Mode............................................................................................................. 20
7.11. Pulse Width Trigger Shutter Mode............................................................................................................ 21
7.12. FAST Pulse Width Trigger Shutter Mode ................................................................................................... 22
8. Partial Scan Mode .......................................................................................................................................... 23
9. Serial Communication Function ....................................................................................................................... 25
10. Pixel Defect Correction ................................................................................................................................... 26
11. User Data SAVE/Read-out Function ................................................................................................................. 30
11.1. Save User Data...................................................................................................................................... 30
11.2. Reading Out of User Data ....................................................................................................................... 30
12. Factory Settings............................................................................................................................................. 31
13. Sensor Optical Axis Accuracy .......................................................................................................................... 32
14. Dimensions ................................................................................................................................................... 33
15. Case for Indemnity ........................................................................................................................................ 34

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
3
16. CMOS Pixel Defect ......................................................................................................................................... 34
17. Product Support ............................................................................................................................................ 34

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
4
1. Handling Precautions
The camera must not be used for any nuclear equipment or aerospace equipment with which mechanical failure or malfunction
could result in serious bodily injury or loss of human life. Our warranty does not apply to damages or defects caused by
irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
・Do not use or store the camera in the extremely dusty or humid places.
・Do not apply excessive force or static electricity that could damage the camera. Handle the camera with care.
・Do not shoot direct images that are extremely bright (e.g., strong light source, sun, etc.). When extremely strong light
such as spotlight was shot, blooming or smear may occur. Please put the lens cap on when camera is not in use.
・Follow the instructions in the Section 6., “External Connector Pin Assignment” for connecting the camera. Improper
connection may cause damages not only to the camera but also to the connected devices.
・Confirm the mutual ground potential carefully before connecting the camera to monitors or computers. Any AC leaks or
coupling noises from the connected devices may cause damages or destroy the camera.
・Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply voltage may cause
damages or malfunction of the camera.
・The voltage ripple of camera power DC +12V±10% shall be within ±50mV. Improper power supply voltage may cause
noises on the video signals.
・The rising time of camera power supply voltage shall be less than +10V, Max 60ms. Please avoid noises like chattering
when rising.
[About Heat Dissipation]
For heat dissipation, CIS recommends M42 Mount lenses or F Mount Lenses with conversion ring to be used with VCC-16MV02.
Installing the camera to a heat radiating metal by fixing its front with 4 x M4 screws is also recommended.
10 4020 30 50
10
11
12
電 源 電 圧 [V]
電源 電圧 立 ち 上 がり 時間[ms]
9
8
7
60 70
Power Supply Voltage
Voltage Rising Time

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
5
2. Product Outline
VCC-16MV02 is a Camera Link interfaced and 12M resolution B/W camera module. 12.29M pixels, 1.1 type (diagonal
Length 17.6mm) B/W CMOS sensor is utilized. Entire pixels can be read out at 1/53s with Full Configuration output.
Features
□Global shutter CMOS sensor
□Camera Link Base, Medium, FULL, 8tap10bit, and 10tap8bit are supported.
□Fixed trigger shutter mode, Pulse width trigger shutter mode
□Full frame rate and video output are as below.
3. System Configuration
3.1. Camera
□Camera, VCC-16MV02
3.2. Optional Accessories
□M42-F Lens Mount Conversion Ring
3.3. Free Software
Control software (for evaluation and demonstration)
※CIS control panel software for evaluation purpose only is downloadable via our web.
CIS shall be exempted from taking responsibility and held harmless for damage or malfunction of your hardware and
software caused by using this control software. The purpose of this control software prepared is for users to check
operation and evaluate our products. Please be noted that CIS does not customize the program nor provide source
code.
3.4. Packaging
□Individual Carton
□Master Carton (20pcs/carton)
Note) Master carton may vary depends on the quantity to be shipped.
2Tap Base Configuration
13.324fps
8bit/10bit
4Tap Medium Configuration
26.647fps
8bit/10bit
8Tap FULL Configuration
53.294fps
8bit
8Tap10bit Configuration
53.294fps
10bit
10Tap8bit Configuration
62.984fps
8bit
Factory Settings: 4Tap8bit Configuration

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
6
4. Specifications
4.1. General Specifications
(1) Pickup device
Device Type
Diagonal length 17.6mm (1.1type) Global shutter B/W CMOS
Effective pixel number
4096(H) × 3000(V)
Unit cell size
3.45μm(H) × 3.45μm(V)
(2) Video Output Frequency
Pixel Clock
84.86MHz
2tap Configuration mode:
Horizontal Frequency
40.947KHz
Horizontal Clock
2080CLK
Vertical Frequency
13.324Hz
Scanning Lines
3062H
4tap Configuration mode:
Horizontal Frequency
81.593KHz
Horizontal Clock
1040CLK
Vertical Frequency
26.647Hz
Scanning Lines
3062H
8tap Configuration mode:
Horizontal Frequency
163.19KHz
Horizontal Clock
520CLK
Vertical Frequency
53.294Hz
Scanning Lines
3062H
10tap Configuration mode:
Horizontal Frequency
192.86KHz
Horizontal Clock
440CLK
Vertical Frequency
62.984Hz
Scanning Lines
3062H
(3) Sync system
Internal Sync. System
(4) Video output
2Tap Base Configuration
4Tap Medium Configuration
8Tap Full Configuration
8Tap10bit Configuration
10Tap8bit Configuration
(5) Resolution
3000TV lines
(6) Output format
Sensor AD
10bit
Camera Link Output
8bit / 10bit B/W output
(7) Sensitivity
F5.6 400lx (Shutter speed 1/27s(OFF), Gain 0dB, 4tap8bit Configuration mode)
(8) Minimum illumination
F1.4 0.11 lx (Shutter speed 1/27s(OFF), Gain +36dB, 4tap8bit Configuration mode)
(9) Power Requirements
DC+12V±10% 12pins circular connector or PoCL
(10) Power consumption
3.6 W (DC+12V IN, 4Tap 8bit Configuration mode, Full frame scan output)
4.0 W (DC+12V IN, 10Tap 8bit Configuration mode, Full frame scan output)
(11) Dimensions
Please refer to overall dimension drawing. (H:55mm W:55mm D:25mm Excluding projection)
(12) Weight
Approx. 100g
(13) Lens mount
M42 mount ※Please refer to overall dimension drawing.
(14) Optical axis accuracy
Please refer to drawing for CMOS Optical Axis Accuracy.
(15) Gain variable range
0dB ~ +36dB (Guaranteed range)
(16) Shutter speed variable
range
OFF ~ Approx. 1/51,000s (at 10tap mode)
(17) Trigger mode
Fixed shutter trigger mode, Pulse width shutter trigger mode
(18) Partial scan
Full frame scan ~ 4 lines (4 lines/step)
(19) Safety/Quality standards
UL: Conform to UL Standard including materials and others.
CE
EMC
2014/30/EU
Emission
: EN61000-6-4:2007+A1:2011
Immunity
: EN61000-6-2:2005
RoHS
2011/65/EU
Conformity Standards
EN50581 (RoHS 2)
(20) Durability
Vibration
Acceleration
: 98m/s2(10G)
Frequency
: 20 ~ 200 Hz
Direction
: X, Y, and Z 3 directions
Testing time
: 120min for each direction
Shock
No malfunction shall be occurred with 980m/s2(100G) for ±X,±Y, and ±Z, 6 directions.
(21) Operational Environment
Operation Guaranteed Temperature
-5 ~ +45℃
Humidity 20 ~ 80%RH
with no condensation
(22) Storage Environment
-25 ~ +60℃Humidity 20 ~ 80%RH with no condensation

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
7
4.2. Camera Input and Output Signals Specifications
(1) Video Output Data
Effective Video Output
4096(H) × 3000(V)
At full frame scan
(2) Sync. Signal Output
LVAL
:No. 6 pin
12pins circular connector
(TTL output)
FVAL
:No.7 pin
EXPOSURE
:No. 9 pin
DVAL
:No. 10pin
LVAL
Camera Link output (LVDS)
FVAL
DVAL
SP (EXPOSURE)
(3) Trigger Input
Polarity
Positive/Negative
Selectable
Pulse width
1H (Min.) ~ Approx. 2 frames
Functionally, no upper limitation is set but at long time
exposure, dark noises and shading noises might be noticeable.
Trigger input
: No.11 pin
12pins circular connector
(TTL)
: CC1
Camera Link input (LVDS)
(4) Serial
Communications
SerTC (Serial to Camera)
Camera Link input (LVDS)
SerTFG (Serial to Frame Grabber)
Camera Link output (LVDS)
Video signals
White Clip Level
At Digital 8bit
: 255dig
Setup Level
At Digital 8bit
: 2±2dig
(Condition: Gain 0dB)
Dark Shading
At Digital 8bit
: Both horizontal and vertical
should be under 4dig.
(Condition: Gain 0dB)
IO Interface of 12pins Circular connector at rear

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
8
4.3. CMOS Spectral Response
※The lens characteristics and illuminant characteristics are excluded.
4.4 Video Output Format
(1) 2tap Base Configuration mode : 13.324fps
・・・D D
～
～～ ～
3000 Line
4096pixel
1 2
(2) 4tap Medium Configuration mode : 26.674fps
D DD D ・・・
～
～～ ～
3000 Line
4096pixel
1234

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
9
(3) 8tap Full , 8tap10bit Configuration mode : 53.294fps
D D D DD D D D ・・・
～
～～ ～
3000 Line
4096pixel
1 2 3 4 5 6 7 8
(4) 10tap8bit Configuration mode : 62.984 fps
D D D DD D D D ・・・
～
～～ ～
3000 Line
4100pixel
1 2 3 4 5 6 7 8
D D
109

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
10
5. Camera Function Settings
Camera functions can be set with serial communications.
Function
Address
Data
Description
Camera Mode
1
0
2Tap
8bit/10bit
1
4Tap
8bit/10bit
2
8Tap
8bit/10bit
3
10Tap
8bit
Output Data Selection
2
0
8bit output
1
10bit output (Invalid at 10Tap mode)
Trigger Shutter Mode
※FAST trigger mode is forced to be
disabled at normal shutter mode.
To enable FAST trigger mode, fixed
trigger shutter mode or pulse width
trigger shutter model shall be
selected.
3
0
Normal shutter mode (Free-run)
(Shutter speed can be set with address 23 and 24).
1
Fixed trigger shutter mode
(Shutter speed can be set with address 23 and 24)
2
Pulse width trigger shutter mode
(Shutter speed can be set with trigger pulse width).
Trigger Polarity
4
0
Positive
1
Negative
Trigger Input
5
0
Camera Link CC1
1
12pins circular connector No.11 pin (TTL)
FAST trigger mode selection
※Trigger mode to capture the trigger
input with H cycle or the mode to
capture the trigger input with CLK
sync is switchable.
However, please be noted that
overlapped operation cannot be
operative at CLK sync mode.
This mode is effective to avoid hunting
at high-speed shutter operation.
6
0
H sync. mode (Trigger is taken with H sync.)
※A trigger during outputting images can be input (Overlap
operation is doable).
※Exposure time during normal shutter mode and fixed
trigger shutter mode can be set per H.
1
FAST trigger mode (Trigger is taken with CLK sync.)
※A trigger during outputting images cannot be input (Overlap
operation is not doable).
※Exposure time of manual shutter during fixed trigger
shutter mode is changed to be set per μs (approximate value).
Test Pattern
7
0
OFF
1
Gray scale (Valid only when cursor is OFF)
2
Horizontal ramp waveform (Valid only when cursor is OFF)
3
Vertical ramp waveform (Valid only when cursor is OFF)
Cursor Display
8
0
OFF
1
ON (Cursor output has its priority when test pattern output is ON)
Cursor X Coordinate
9
0 ~ 4095
Horizontal 4096 pixels (Factory setting is 0. When operating
coordinate, it is reset to 0.)
Cursor Y Coordinate
10
0 ~ 2999
Vertical 3000 lines (Factory setting is 0. When operating
coordinate, it is reset to 0.)
Output Image Horizontal Flip
11
0
Normal
When in operation, the cursor is reset
to (0, 0).
1
Horizontal flip
Output Image Vertical Flip
When in operation, the cursor is reset
to (0, 0).
12
0
Normal
1
Vertical flip
Defective Pixel Correction
13
0
OFF
1
ON

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
11
Serial Communications
Baud Rate Selection
※INIT command is excluded.
14
0
9,600baud
1
115,200baud
Black Level Adjustment
16
0 ~ 100
Black level adjustment (With INIT command, it is restored to
factory-settings)
Gain
20
0
0dB fixed gain
1
+ 6dB fixed gain
2
+12dB fixed gain
3
+18dB fixed gain
4
+24dB fixed gain
5
+30dB fixed gain
6
+36dB fixed gain
11
Manual gain (Refer to the address 21)
Manual Gain
21
0 ~ 480
0 ~ + 48dB (1dig=0.1dB)
Shutter
23
0 ~ 15
Preset shutter (Please refer to The List of Preset Shutter)
16
Manual shutter (Please refer to the address 24)
Manual Shutter
24
1 ~ 3000
1line/step (Please refer to Formula to Calculate Manual Shutter
Values)
Manual Shutter (At FAST trigger)
24
40
15 ~ 200,000
Specify exposure time with μs (approximate value).
Please refer to the manual shutter settings of FAST trigger mode
(CLK sync mode)
Gamma ON/OFF Selection
0
OFF (Bypass)
Gamma ON/OFF Selection
Gamma coefficient Selection
40
41
1
Gamma correction ON
0 ~ 15
Gamma coefficient 0 : 0.1 ~ 15 : 1.6 (per 0.1)
Vertical Partial (Lump Settings)
50
3 parameters
The 1st parameter: Partial number (0 ~ 7)
The 2nd parameter: Start line (0 ~ 2996 per 4 lines)
The 3rd parameter: Effective line numbers (4 ~ 3000 per 4 lines)
Vertical Partial (Lump Settings)
Vertical Partial Mode
50
54
1 parameter at
acquisition
Specify the partial numbers (0 ~ 7).
0
OFF
When in operation, the cursor is reset
to (0, 0).
1
Reflect the value set by the address 50, and then set vertical partial
ON.
Factory Settings
INIT
None
Restore the settings to the factory settings.
Data Save
SAVE
None
Save the camera settings
White Defect Detection by Users
100
2 Parameters
Detect the later occurred white defects and register them.
Addition of defective Pixels by Users
101
2 Parameters
Register the defective pixels specified with (x, y).
Deletion of defective Pixels by Users
102
2 Parameters
Delete the defective pixels specified with (x, y).
Complete Deletion of defective Pixels
by Users
103
1 (fixed)
Delete all the defective pixels detected and registered by the user.
Indication of defective Pixels
104
0 at set up
Turn OFF the indication of bright point
1 at set up
Indicate the position of the correcting pixels with lighting.
1 at acquisition
Indicate the list of data at ex-factory and the registered data by the
user.
2 at acquisition
Indicate only the list of the registered data by the user.
3 at acquisition
Indicate the registered number of the defective pixels per reed.
4 at acquisition
List up and indicate the registered number of the defective pixels
per reed.

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
12
User Data Settings
200
2 parameters
All 0xFF at
Ex-Factory.
Set any data for the user area (32 byte).
Save with SAVE command.
※Do not set any address or data other than specified the above.
5.1. The List of Preset Shutter
4096dot X 3000line
Data
2Tap mode
4Tap mode
8Tap mode
10Tap mode
0
1/14(OFF)
1/27(OFF)
1/54(OFF)
1/64(OFF)
1
1/60
1/60
1/60
↑
2
1/100
1/100
1/100
1/100
3
1/150
1/150
1/150
1/150
4
1/200
1/200
1/200
1/200
5
1/250
1/250
1/250
1/250
6
1/500
1/500
1/500
1/500
7
1/1000
1/1000
1/1000
1/1000
8
1/2000
1/2000
1/2000
1/2000
9
1/2500
1/2500
1/2500
1/2500
10
1/5000
1/5000
1/5000
1/5000
11
1/10000
1/10000
1/10000
1/10000
12
1/16000
1/20000
1/20000
1/20000
13
1/26000
1/26000
1/30000
1/29000
14
↑
1/38000
1/38000
1/40000
15
↑
↑
1/49000
1/51000
5.2. Formula to Calculate Manual Shutter Values
Formula: Exposure Time = Time for 1 line (Please refer to the table below) x Address 24 set value + 14.26μs
Camera Mode
Time for 1 line
2Tap Configuration mode
24.512μs
4Tap Configuration mode
12.256μs
8Tap Configuration mode
6.128μs
10tap Configuration mode
5.185μs
※The minimum setting value shall be 1 and the maximum setting value shall be clipped with 3000 or the total line number
for partial settings.

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
13
5.3. Manual Shutter Settings with FAST Trigger Mode (CLK Sync Mode)
・The minimum setting value: 15μs (approximate value)
・The maximum value: 200ms (approximate value)
※With long exposure setting, bright spot may be noticeable.
・Setting unit: Per 1μs (approximate value)
※Slight differences may occur since it is generated by 74.25MHz clock.
5.4. Notes for Function Settings
※2 seconds shall be waited after power is turned on for the camera to operate properly.
※We have no assumption that horizontal image flip, vertical image flip, partial mode settings, and gamma coefficient
selection commands shall be reflected immediately. Please be noted that a dummy trigger is needed at trigger mode.
※When camera mode (Tap mode) is changed, please re-set other functions, too.
※When gain is set to over +36dB, image quality deterioration is inevitable. Please evaluate first.
6. External Connector Pin Assignment
6.1. 12pins Circular Connector HR10-10R-12PA(73) (HIROSE) or equivalent
Pin No.
Description
1
GND
2
Power Input (DC+12V)
3
GND
4
NC
5
GND
6
LVAL Output
7
FVAL Output
8
GND
9
Exposure Output
10
DVAL Output
11
TRIGGER Input
12
GND

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
14
6.2. Camera Link Connector 12226-1100-00PL (SUMITOMO 3M)
1
14
13
26
1
14
13
26
(Base Configuration)
(Medium / Full Configuration)
CL
PoCL
(SW1)
CL1CL2
DC IN
Connector (CL2) Connector (CL1)
6.3. PoCL Selection Switch (SW1)
(1) PoCL・・・To be selected when a PoCL frame grabber board is used and power is fed via the frame grabber
board.
(2) CL・・・To be selected when Non-PoCL frame grabber board is used. Power shall be fed via 12pins circular
connector.
※Please make sure that power is OFF when changing the switch settings. If the switch setting was changed while
power is ON, it may cause malfunction or damages to the camera.
※Please note that there is a mode that the power consumption exceeds the standard value of power feeding (4.0W).
We recommend to feed power via both cables CL1 and CL2 when using PoCL, or to feed power via 12pins circular
connector.
Pin
No.
Description
Pin
No.
Description
Pin
No.
Description
Pin
No.
Description
1
NC/+12V(PoCL)
14
GND
1
NC/+12V(PoCL)
14
GND
2
Y0-
15
Y0+
2
X0-
15
X0+
3
Y1-
16
Y1+
3
X1-
16
X1+
4
Y2-
17
Y2+
4
X2-
17
X2+
5
Yclk-
18
Yclk+
5
Xclk-
18
Xclk+
6
Y3-
19
Y3+
6
X3-
19
X3+
7
100Ω
20
Terminated
7
SerTC+
20
SerTC-
8
Z0-
21
Z0+
8
SerTFG-
21
SerTFG+
9
Z1-
22
Z1+
9
CC1-(Trigger IN -)
22
CC1+ (Trigger IN +)
10
Z2-
23
Z2+
10
CC2+
23
CC2-
11
Zclk-
24
Zclk+
11
CC3-
24
CC3+
12
Z3-
25
Z3+
12
CC4+
25
CC4-
13
GND
26
NC/+12V(PoCL)
13
GND
26
NC/+12V(PoCL)

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
15
7. Timing Chart
7.1. Horizontal Sync. Timing (2Tap Configuration mode)
LVAL Out
～ ～
Effective Data : 2048 CLK 32 CLK
DVAL Out
1H = 2080 CLK
～ ～
Camera Link Port B ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port A 1 3 ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
5 7
2 4 6 8
4089 4091 4093 4095
4090 4092 4094 4096
12
Video Out 4
0
9
5
4
0
9
6
～ ～
Camera Link CLK : 84.86MHz
7.2. Vertical Sync. Timing (2Tap Configuration mode)
FVAL Out
1Frame = 3062H
Effective Line : 3000H
Effective Line
DVAL Out
～ ～
LVAL Out
～ ～
Effective Line
～ ～～
～
V Blanking : 62H
Exposure Time
SP Out(Exposure Out)
3
0
0
0
3
0
0
0
1 1
Video Out
～ ～ ～ ～
Appr
ox.
56Ｈ
1H = 24.512us
2Tap Configuration mode: 13.324fps

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
16
7.3. Horizontal Sync. Timing (4Tap Configuration mode)
Camera Link Port D
Camera Link Port C
LVAL Out
～ ～
Effective Data : 1024 CLK 16 CLK
DVAL Out
1H = 1040 CLK
～ ～
Camera Link Port B ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port A 1
3
・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
5
7
2
4
6
8
4089
4091
4093
4095
4090
4092
4094
4096
12
Video Out 4
0
9
5
4
0
9
6
34
～ ～
4
0
9
3
4
0
9
4
Camera Link CLK : 84.86MHz
7.4. Vertical Sync. Timing (4Tap Configuration mode)
FVAL Out
1Frame = 3062H
Effective Line : 3000H
Effective Line
DVAL Out
～ ～
LVAL Out
～ ～
Effective Line
～ ～～
～
V Blanking : 62H
Exposure Time
SP Out(Exposure Out)
3
0
0
0
3
0
0
0
1 1
Video Out
～ ～ ～ ～
Appr
ox.
56Ｈ
1H = 12.256us
4Tap Configuration mode: 26.647fps

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
17
7.5. Horizontal Sync. Timing (8Tap Configuration mode)
Camera Link Port D
Camera Link Port C
LVAL Out
～ ～
Effective Data : 512 CLK 8 CLK
DVAL Out
1H = 520 CLK
～ ～
Camera Link Port B ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port A 1
3
・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
2
4
4089
4091
4090
4092
12
Video Out 4
0
9
5
4
0
9
6
34
～ ～
4
0
9
3
4
0
9
4
Camera Link Port H
Camera Link Port G
Camera Link Port F ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port E 5
7
6
8
4093
4095
4094
4096
5678
4
0
9
1
4
0
9
2
4
0
8
9
4
0
9
0
Camera Link CLK : 84.86MHz
7.6. Vertical Sync. Timing (8Tap Configuration mode)
FVAL Out
1Frame = 3062H
Effective Line : 3000H
Effective Line
DVAL Out
～ ～
LVAL Out
～ ～
Effective Line
～ ～～
～
V Blanking : 62H
Exposure Time
SP Out(Exposure Out)
3
0
0
0
3
0
0
0
1 1
Video Out
～ ～ ～ ～
Appr
ox.
56Ｈ
1H = 6.128us
8Tap Configuration mode: 53.294fps

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
18
7.7. Horizontal Sync. Timing (10Tap Configuration mode)
Camera Link Port D
Camera Link Port C
LVAL Out
～ ～
Effective Data : 410 CLK 30 CLK
1H = 440 CLK
Camera Link Port B ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port A 1
3
・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
2
4
4091
4093
4092
4094
12
Video Out 4
0
9
9
4
1
0
0
34
～ ～
4
0
9
7
4
0
9
8
Camera Link Port H
Camera Link Port G
Camera Link Port F ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・
Camera Link Port E 5
7
6
8
4095
4097(dummy)
4096
4098(dummy)
5678
4
0
9
5
4
0
9
6
4
0
9
3
4
0
9
4
Camera Link Port J
Camera Link Port I 9
10
4099(dummy)
4100(dummy)
4
0
9
1
4
0
9
2
91
0
Camera Link CLK : 84.86MHz
7.8. Vertical Sync. Timing (10Tap Configuration mode)
FVAL Out
1Frame = 3062H
Effective Line : 3000H
Effective Line
DVAL Out
～ ～
LVAL Out
～ ～
Effective Line
～ ～～
～
V Blanking : 62H
Exposure Time
Exposure Out
3
0
0
0
3
0
0
0
1 1
Video Out
～ ～ ～ ～
Appr
ox.
56Ｈ
1H = 5.185us
10Tap Configuration mode: 62.984fps

VCC-16MV02 Rev.905-0163-00
©2018 CIS Corporation. All rights reserved.
19
7.9. Fixed Trigger Shutter Mode
□This is the mode to start exposure with external input trigger signals, and set the exposure time with serial
commands.
□Trigger operation is H Sync, and V-sync Reset system. The delay time (Exposure Time Delay) from detecting
trigger edge in the camera to actually starting exposure is 2H ~ 3H.
Since the external trigger signals synchronize with camera internal H signals, 1H jitter occurs to Exposure Time Delay.
The trigger pulse with the minimum 1H and more shall be input (Please refer to the table below for the details of 1
line width).
Camera Mode
Time for 1 line
2Tap Configuration mode
24.512μs
4Tap Configuration mode
12.256μs
8Tap Configuration mode
6.128μs
10Tap Configuration mode
5.185μs
□There is an exposure time period for approx. 14.26μs at the edge right after exposure output.
□Triggers can be accepted while outputting video output images. However, please be noted that a trigger signal to
start the next video outputting should not be input before completion of outputting the prior images.
□Trigger input during exposure time shall be ignored in the camera. (Refer to (A) in the drawing below).
Please note that a trigger shorter than 1 frame cycle shall not be used.
Effective Line : 3000H
Effective Line
～ ～
Exposure Out
3
0
0
0
1
TRIG IN
LVAL Out
FVAL Out
Video Out
DVAL Out
～ ～
3
0
0
0
1
Effective Line
Trigger input ignore period
Exposure Time
Exposure Time Delay
(A)
TRIG IN
Exposure Out
(SP Out) Exposure time delay