CIS iVISION Security VCC-V90S Installation instructions

VCC-V90S Rev.900-625-30-00
En
g
lish
1.3M Pixel Intelligent Camera
VCC-V90S
Product Specification
& Operation Manual
CIS Corporation
©2008 CIS Corporation. All rights reserved.
1

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
2
TableofContents
1. Scope of Application··························································································································3 
2. Handling Precautions·························································································································3 
3. Product Outline································································································································4 
4.Specification ···································································································································5
4.1.General Specification ···············································································································5
5. Description of components··················································································································8 
6. Shipping Settings ··························································································································· 13 
7. Dimensions····································································································································14 
8. Cases for Indemnity (Limited Warranty)································································································ 15 
9.CCD Pixel Defect ··························································································································· 15
10.Product Support ····························································································································15

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
3
1. Scope of Application
This is to describe VCC-V90S, a high resolution 1/3” 1.3Mpixel CCD image sensor intelligent camera. All specifications
contained herein are subject to change without prior notice. Reproduction in whole or in part is prohibited.
2. Handling Precautions
The camera must not be used for any nuclear equipments or aerospace equipments with which mechanical failure or
malfunction could result in serious bodily injury or loss of human life.
Our warranty does not apply to damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below. Our warranty does not apply to damages or malfunctions caused by
neglecting these precautions.
・Do not use or store the camera in the following extreme conditions:
Extremely dusty or humid places.
Extremely hot or cold places (operating temperature –5 to +45 )°C
Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
Places subject to fluorescent light reflections.
Places subject to unstable (flickering, etc.) lighting conditions.
Places subject to strong vibration.
・Do not apply excessive force or static electricity that could damage the camera.
・Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.) and when camera is not
in use, put the lens cap on.
・Connect the camera properly. Improper connection may cause damages not only to the camera but also to
the connected devices.
・Confirm the mutual ground potential carefully and then connect the camera to monitorsorcomputers. AC
leaks from the connected devices may cause damages or destroy the camera.
・Do not apply excessive voltage.(Use only the specified voltage.) Unstable or improper power supply voltage may cause
damages or malfunction of the camera.
・Electric current of the auto Iris Lens must be less than 50mA.
・Protruding portion of the lens from the lens mount surface must be less than 4.8mm.
If C mount lens is installed while CS adjust is set, it might result in breaking lens or the camera.
・Electronic Iris and Lens iris may cause “hunting” effect, depending on the image subject.
・Electronic iris mode can have a color change when used with fluorescent lights.

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
4
3. Product Outline
VCC-V90S is an intelligent camera, utilizing a 1/3 inch, 1.25Mpixel CCD image sensor.
Features
•CCD uses Ye・Cy・Mg・G mosaic color filter that enables high resolution and sensitivity.
•V90S is built around Texas Instruments’ “DaVinci™” technology and enables the camera to be programmable internally.
•Enables NTSC/PAL for monitor video output. Digital image can be output via Ethernet.
•Supports both http and ftp protocol.
•SXGA (1280×720 @30fps), HDV (1280×960 @22.5fps), VGA (640×480 @30fps), QVGA(320 x 480@30fps)
•Wide Dynamic Range Process at VGA resolution.
•Dynamic Range Compression process. Long exposure shutter feature provides brilliant image even in very low light
environment. Also supports dynamic range compensation feature by Apical Limited.
•Allows longer shutter speed to provide high quality image in low lighting environment.
•IR Cut filter IN/OUT feature can switch modes with AGC values automatically.
•DC Iris control.
•Enables electronic zoom and focus lens connectivity.
•RS-232C port .
•C/CS Mount ready
•Power can be supplied by both DC+12V
•Audio input and line output
•Integrated I/O switch connector

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
5
4. Specification
4.1. General Specification
(1) Pickup Device
Device Type 1/3” Interline Transfer Color CCD SONY ICX445AKA Total Pixel no. 1348(H) × 976(V)
Effective pixel no. 1296(H) × 966(V)
Active pixel no. 1280(H) × 960(V)
Unit cell size 3.75μm(H) ×3.75μm(V)
Chip size 6.26mm(H) × 5.01mm(V)
(2) Video output frequency
(camera->DSP)
SXGA 22.5fps(Progressive scan mode)
Pixel Clock 36.00 MHz ±100ppm
Horizontal
Frequency 22.50 KHz ±100ppm (1600 CLK)
Vertical
Frequency 22.47 Hz ±100ppm (1001 H)
VGA 30fps(4 pixel addition mode)
Pixel Clock 36.00 MHz ±100ppm
Horizontal
Frequency 16.48 KHz ±100ppm (819 CLK)
Vertical
Frequency 29.97 Hz ±100ppm (550 H)
HDV 30fps(Center cut-out mode)
Pixel Clock 36.00 MHz ±100ppm
Horizontal
Frequency 23.37 KHz ±100ppm (1540 CLK)
Vertical
Frequency 29.9586 Hz ±100ppm (780 H)
QVGA 30fps(4 pixel addition mode)
Pixel Clock 18.00MHz
Horizontal
Frequency 8.18 KHz (2200 CLK)
Vertical
Frequency 29.9 Hz (273 H)
(3) Video output standard Ethernet・Monitor (NTSC/PAL)
(4) Image Pickup Method Single-board Ye,Cy,Mg,G Mosaic
(5) Resolution Monitor : 330 TV Lines or more (VGA)
Ethernet : 660 TV Lines or more (SXGA,HDV)
(6) Sensitivity 2000 Lux (Shutter 1/30s, Gain 0dB)
VGA F8 or more
HDV F5.6 or more
(7) Minimum Illumination VGA(F1.4 Shutter 1/30s,VIDEO 50%,AGC 30dB)
1.0 Lux (IRCUT_IN)
0.1 Lux (IRCUT_OUT)
HDV(F1.4 Shutter 1/30s,VIDEO 50%,AGC 30dB)
2.0 Lux (IRCUT_IN)
0.2 Lux (IRCUT_OUT)
SXGA(F1.4 Shutter 1/22.5s,VIDEO 50%,AGC 30dB)
1.5 Lux (IRCUT_IN)
0.15 Lux (IRCUT_OUT)
(8) Dust or stains in optical
system No dust or stain shall be detected on the testing screen with F16

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
6
(9) Power requirements DC+12V±10% (Max voltage not to exceed +13.2V), or
IEEE 802.3af CLASS 3 (4.49 to 12.95W)
(10) Power consumption 6.5W (DC+12V IN)
7.5W(IEEE 802.3af)
(11) Dimension Refer to overall dimension drawing: H:66 mm W:74 mm D:139 mm (excluding projection)
(12) Network connectivity 10Base-T/100Base-TX Ethernet(RJ-45)
(13) Weight Appx. 490g (Camera part)
(14) Lens mount C/CS mount (refer to overall dimension drawing)
(15) Monitor output frequency Horizontal Frequency 15.73KHz
Sub carrier Frequency 3.579MHz
Vertical Frequency 59.94Hz
(16) Gain AGC OFF
AGC (0dB~+18dB)
AGC (0dB～+30dB)
MANUAL (0dB～+30dB)
(17) Shutter Speed AES OFF
AES (2sec～1/10000)
MANUAL (2sec～1/10000)
(18) White balance ATW1
ATW2
FIX 3200°K
FIX Fluorescent
FIX 5600°K
MANUAL
ONE PUSH
(19) Automatic Iris DC IRIS：4 pin square connector
When used parallel, AES works first and DC IRIS will work after.
(20) Audio input Microphone input (Plug in power method 2.5V)
Monaural input (3.5 Monaural mini-jack)
Camera uses a stereo mini-jack, however, the other side must use a monaural mini-plug
(21) Audio output Line output
Monaural output (3.5Φ Monaural mini-jack)
Camera uses a stereo mini-jack, however, the other side must use a monaural mini-plug
(22) I/O 1 I/O Switch control
Output: Open collector (PULL UP 10KΩ +5V)
Input: Connector set to OPEN identifies ”1”,les than 1KΩGND, PULL DOWN：”0” (PULL UP 10KΩ
+5V)
(23) White clip 714 mV ± 5% (Monitor output、75Ω NTSC end)
(24) SYNC 286 mV ± 5% (Monitor output 、75Ω NTSC end)
(25) Setup 23 ± 10mV (Monitor output 、75Ω NTSC end、AGC Off)
(26) BURST 286 mV ± 5%( Monitor output 、75 ΩNTSC end)
(27) γGamma compensation γ0.45
(28) Wide dynamic range VGA setting allows 2 CCD exposure images can be output, and also the feature can be switched
to OFF/On
(29) Dynamic range
compensation VGA setting allows Dynamic Range Compensation process(by Apical Ltd.) and also the feature can be switched to OFF/ON.
(30) IR-CUT IN/OUT Can be controlled by Gain

VCC-V90S Rev.900-625-30-00
(31) Safety/Quality standards UL: Conform to UL standard including materials and others.
CE certification To be applied
RoHS Conformed
FCC Class A Digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
(32) Durability Vibration Acceleration : 19.6m/s2 (2G)
Frequency
: 20～200Hz
Direction : XYZ 3 directions
Testing Time : 120min each directions
Shock 490m/s2, ±X,±Y,±Z x 3 times =18 times total.
Shock tes
t
No malfunctions shall be occurred when dropping from 0.6m high without package.
(33) Operational environment Temp. (1) 0℃～+40℃Humidity 20 ～80% No condensation
Operation
Temp. (2) 5℃～+45℃Humidity 20 ～80% No condensation
(1) Operation guaranteed temperature
(2) Operation temperature
(34) Storage environment -25～+60RH 20 ～80% No
condensation No condensation
©2008 CIS Corporation. All rights reserved.
7

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
8
5. Description of components

VCC-V90S Rev.900-625-30-00
①Power connector
12
pin Description
1 DC+12V Input DC+12V+-10%
2 GND GND
②POWER LED
It lights when power is supplied properly.
③RJ-45 10/100Base Ethernet connector
Connect to Ethernet
pin Description
1 TX+ Transmit twist pair (+) (Alternative A)
2 TX- Transmit twist pair (-) (Alternative A)
3 RX+ Reception twist pair (+) (Alternative A)
4 SPARE Spare twist pair (Alternative B)
5 SPARE Spare twist pair (Alternative B)
6 RX- Reception twist pair (-) (Alternative A)
7 SPARE Spare twist pair (Alternative B)
8 SPARE Spare twist pair (Alternative B)
LED(G):Link Status LED(O): Receive Status
©2008 CIS Corporation. All rights reserved.
9

VCC-V90S Rev.900-625-30-00
④VIDEO OUT
Video output connector. Connects to a monitor via BNCconnector cable.
pin Description
1 VIDEO VIDEO output signal (75Ω,1Vp-p)
2 GND GND
⑤RS232Cconnector
9pin D-SUB(Femal) connector for serial communication
Please use cross cable when connecting with a PC.
pin Description
1 (N.C.) Not connected
2 RxD Receive signal
3 TxD Transmit signal
4 DTR Control signal (connect with 6pin internally)
5 GND GND
6 DSR Control signal (connect with 4pin internally)
7 RTS Control signal (connect with 8pin internally)
8 CTS Control signal (connect with 7pin internally)
9 (N.C.) Not connected
⑥I/O connector
Ports for the signal for Electric lens and I/O switch.
pin Description
1 GND GND
2 I/O I/O switch port
3 LENS TELE- Electric lens TELE-
4 LENS TELE+ Electric lens TELE+
5 LENS FAR- Electric lens FAR-
6 LENS FAR+ Electric lens FAR+
©2008 CIS Corporation. All rights reserved.
10

VCC-V90S Rev.900-625-30-00
I/O ports
Output is set as Open collector (+5V PULL UP 10KΩ)(Max.20mA, Max.+5.5V)
Input is set as Emitter Follower (+5V PULL UP 10K)(Max.20mA,Max.+5.5V)
At the time of input, set connector OPEN to identify “1”, and connect between a connector and GND as short or
less than 1KΩto identify “0”.
2
1
5
4
6 3
10K
B
CE
4.7K
5.6K
2.2K
470
10K
10K
22
12
UDZ15 B
2.2K
270NH
P0300SAL(25V/150A)
©2008 CIS Corporation. All rights reserved.
11
I/O Port
+5V
OUT
IN
GND
Camera
100K
Output for Electric lens
This connector controls zoom/focus for the Electric lens
TELE+,- : The voltage difference between + and - connectors occurs when electric
zoom command is issued.
If change to oppoite direction, the voltage difference direction also
changes.
When stops, the pressure becomes 0.
No load operation: +,- connector pressure: 7V
220Ωload operation: +,- connector pressure: 6.7V
FAR+,- : The voltage difference between + and – connectors occurs when electric
focus command is issued.
If change to oppoite direction, the voltage difference direction also
changes.
When stops, the pressure becomes 0.
No load operation: +,- connector pressure: 7V
220Ωload operation: +,- connector pressure: 6.7V
⑦MIC IN connector
Input connector for audio.
Plug-in power standard microphone can be connected. (2.5V)
Can be used as a LINE IN
Please use 3.5 monaural mini plug for input
Camera side uses a stereo mini jack, however, please use monaural mini plug
⑧LINE OUT connector
Output connector for audio
Please use 3.5 monaural mini plug for output
Camera side uses a stereo mini jack, however, please use monaural mini plug

VCC-V90S Rev.900-625-30-00
⑨Imaging system
Image sensor is installed.
⑩Lens Mount
C/CS mount lens
When installing C mount lens, adjut C/CS mount to C and install.
Lens size: screw length 6mm or less from lens mount, stick out must be less than 9.8mm for C mount lens, and less than
4.8mm for CS mount lens.
⑪Mounts for Tripod
To install a camera on a tripod.
⑫Mount lock screw
⑬Mount adjutment screw
This is used to switch C/CS mount, flange back adjustment and setup. Please set this before mounting a lens.
C/CS mount adjust steps
Please not that if C mount lens is installed while having a CS Adjust setting, lens or camera could be damaged.
Setup:
(1) Move Lock counter clockwise and unlock
(2) Move Clockwise for C mount counter clockwise for CS mount, then install lens and adjust back focus.
(3) When done, move Lock clockwise to lock it.
⑭ DC IRIS connector
4pinconnector for DC IRIS
pin
1 DAMP-
2 DAMP+
3 DRIVE+
4 DRIVE-(GND)
When using DC IRIS, use command to enable it, otherwise aperture will be opened.
When AES(AUTO SHUTTER) and DC IRIS are both enabled, AES will work first then DC IRIS will work when the
environment becomes brighter.
Do not use MANUAL SHUTTER slow side (1/15～2sec) and DC IRIS at the same time. DC IRIS will cause hunching.
©2008 CIS Corporation. All rights reserved.
12

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
13
6. Shipping Settings
・ Format VGA
・ Gain AGC(0dB～+18dB)
・ Shutter OFF
・ AE SPEED 10
・ WB ATW1
・ WD OFF
・ APICAL OFF
・ AE LEVEL NOR 10
・ AE LEVEL WD 8
・ D&N IN
・ D&N IR_Cut IN +18dB
・ D&N IR_Cut OUT +30dB
・ DC IRIS ON
・ IRIS SPEED 4
・ LENS ZOOM STOP
FOCUS STOP
・ E ZOOM 0
・ PAN 0
・ TILT 0
・ Audio Normal Mode

VCC-V90S Rev.900-625-30-00
7. Dimensions
©2008 CIS Corporation. All rights reserved.
14

VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
15
8. Cases for Indemnity (Limited Warranty)
When defects or malfunction of V90S is detected when warranty is in effect, follow the instruction described below at
section 10, and CIS will provide necessary repair free of cost.
However, CIS shall be exempted from taking responsibility and held harmless for damages or losses incurred by the user
in the following cases. For the repairs beyond warranty period, CIS shall provide appropriate repair at cost.
In case damage or losses are caused by fire, earthquake, or other acts of God, acts by third party, deliberate or
accidental misuse by the user, or use under extreme operating conditions.
In case indirect, additional, consequential damages (loss of business interests, suspension of business activities)
are incurred as result of malfunction or non-function of the equipment, we shall be exempted from
responsibility for such damages.
In case damage or losses are caused by failure to observe the information contained in the instructions in this
product specification & operation manual.
In case damage or losses are caused by use contrary to the instructions in this product specification & operation
manual.
In case damage or losses are caused by malfunction or other problems resulting from use of equipment or
software that is not specified.
In case damage or losses are caused by repair or modification conducted by the customer or any unauthorized
third party (such as an unauthorized service representative).
Expenses we bear on this product shall be limited to the individual price of the product.
9. CCD Pixel Defect
CIS inspects and confirms no unit has CCD pixel defect before shipping out of our factory.
On very rare occasions, however, CCD pixel defects might be noted with time of usage of the products.
Cause of the CCD pixel defects is the characteristics phenomenon of CCD itself. This issue is out of the warranty.
10. Product Support
When defects or malfunction of our products occur, and if you would like us to investigate on the cause and repair,
please contact your distributors you purchased from to consult and coordinate.