Cisco Network Device MGX 8240 User manual

A-1
Cisco MGX 8240 Hardware Installation Guide
Release 2.2, 78-10084-01, November 1999
APPENDIX
A
Task Lists
Task List for MGX 8240 Private Line Service Gateway
•Prepare site
•Unpack/Required tools
•Inventory parts
•Check condition
•Physically mount chassis
•Check cable length
•Check air flow ventilation and obstruction
•Check air for contamination, humidity, and temperature
•Mount I/O cards (including IMC I/O)
•Mount PSM cards and IMC card
•Connect bits clocks (if necessary)
•Check voltage
•Install power
•Connect power from chassis to power source
•Check fuses (if used)
•Check voltage
•Check Ready LED
•Configure PC/terminal
•Check software versions and revisions
•Perform FDOS
Task List for Common Interface Module
•Prepare site
•Unpack/Required tools
•Inventory parts

A-2
Cisco MGX 8240 Hardware Installation Guide Release 2.2, 78-10084-01, November 1999
Appendix A Task Lists
Task List for Common Interface Module
•Check condition of CIM
•Mount the Common Interface Module in rack
•Check cable length
•Check air flow ventilation and obstruction
•Check for air contamination, humidity, and temperature
•Connect 10Base-T between the Common Interface Module and 1600
•Connect other cables
•Check voltage
•Install power from the Common Interface Module to power source
•Check fuses (if used)
•Configure PC/terminal
•FDOS