
Data Sheet
© 2009-2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Table 1. Benefits of Cisco LCD 100L PRO 32N
Feature Benefit
Integrated with Cisco DMS Tested to work with Cisco DMS products
Low total cost of ownership (TCO) Single vendor for all requirements to reduce costs and save time and long-
term operating expenses
Cisco Services (Cisco SMARTnet®Next Business Day [NBD]
replacement) Exceptional, dependable, and proven service from industry-renowned Cisco
support organization
Cisco CapitalSM leasing and financing options Easy availability of financing options
Product Specifications
Table 2 lists the product specifications.
Table 2. Product Specifications
Feature Specification
Diagonal size 32 inches
Native resolution 1366 x 768 (WXGA), 1920x1080 (HDMI)
Resolutions supported 1080p, 1080i, and 720p
Brightness (typical) 500 cd/m2
Contrast ratio (typical) 3000:1 (Dynamic Contrast Ratio)
Viewing angle (Horizontal/Vertical) 178/178 degrees
Response time 8 ms
Pixel pitch 0.170 x 0.511
Horizontal frequency 30 ~ 83kHz (RGB, HDMI/DVI)
Vertical frequency 56 ~ 75 Hz (RGB), 60 Hz (HDMI/DVI)
Inputs HDMI, VGA, and DVI (composite, component, s-video also exist)
Speaker Optional
Power consumption (maximum) ~160W
Power consumption at standby (maximum) 1W (RGB)/2W (HDMI/DVI)
Power supply 100~240V, 50/60Hz
VESA mount 200 x 200 mm
Weight (set/package) 31.7 lb/39.2 lb
Dimensions (H x W x D) 31.61 x 19.41 x 3.93”
Bezel width 40 mm
Operating temperature 10–40°C
Humidity 10–80%
Mean time between failure (MTBF) 50,000 hours
Built-in TV tuner No
Special features ●Lamp error detection
●Temperature sensor
●Built-in fan
●Video wall
●RS-232C
System Requirements
The Cisco LCD 100L PRO 32N requires a corresponding mount (not sold through Cisco) for suitable installation,
depending on your deployment location and situation.