
Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 3
Product Specifications
Table 2 lists the product specifications for the Cisco LCD 110L PRO 47.
Table 2. Cisco LCD 110L PRO 47 Product Specifications
Feature Specification
Diagonal size 47 in.
Native resolution 1920 x 1080 (HDMI)
Resolutions supported 1080p, 1080i, and 720p
Brightness (typical) 700 cd/m2
Contrast ratio (typical) 1300:1
Viewing angle (Horizontal/Vertical) 178/178 degrees
Response time 10 ms
Pixel pitch 0.5415 x 0.5415
Horizontal frequency 30 ~ 83k Hz (RGB, HDMI/DVI)
Vertical frequency 56 ~ 75 Hz (RGB), 60 Hz (HDMI/DVI)
Inputs HDMI/DVI, RGB, Composite, and Component
Speaker Optional (10W x 2)
Power consumption (maximum) ~260W
Power consumption at standby
(maximum) 1W (RGB)/2W (HDMI/DVI)
Power supply 100~240V, 50/60 Hz
VESA mount 800 x 400 mm
Weight (set/package) 48.94lb/65.26 lb (22.2kg/29.6kg)
Dimensions (H x W x D) 42.50 x 24.59 x 4.83 in. (107.95 x 62.46 x 12.29 cm)
Bezel width 17.9 mm
Operating temperature 0-40°C
Humidity 10-80%
Mean time between failure (MTBF) 50,000 hours
Built-in TV tuner No
Special features ●Lamp error detection
●Temperature sensor
●Built-in fan
●Tile Mode (5x5)
●RS-232C
●Energy Star 5.0
Table 3 lists regulatory and compliance specifications for the Cisco LCD 110L PRO 47, in accordance with
Commission Regulation (EC) 642/2009.
Table 3. Cisco LCD 110 PRO 47 Regulatory and Compliance Specifications
Parameter Specification
Lab tested on-mode power consumption 236W
Lab tested standby mode power
consumption 0.41W
Lab tested off-mode power consumption NA
Forced menu NA
Peak luminance190.5%
Mercury content 99.0mg
Lead content2Yes