Cisco 1100 Series Manual

Hardware Installation Guide for the Cisco 1100 Series Integrated
Services Router
Last Modified: 2018-04-04
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]

©2017-2017 Cisco Systems, Inc. All rights reserved.

CONTENTS
Preface Preface vii
Audience vii
Document Organization vii
Document Conventions viii
Related Documentation ix
Obtaining Documentation and Submitting a Service Request x
CHAPTER 1 Overview of Cisco 1000 Series Integrated Services Routers 1
Overview 1
About Cisco 1100 Series Integrated Service Routers 1
Chassis Views 2
Labels on the Router 3
For Additional Help Locating Labels on the Router 4
Hardware Features 4
Interface Ports 4
Power-over-Ethernet (PoE) 5
LED Indicators 5
Reset Button 10
Slots and Interfaces 10
About Slots, Subslots, and Port Numbering 10
Subslot/Bay Numbering 11
Specification 11
Periodic Inspection and Cleaning 14
CHAPTER 2 Preparing for Router Installation 15
Preparing for Router Installation 15
Safety Recommendations 15
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
iii

Safety With Electricity 15
Preventing Electrostatic Discharge Damage 16
General Site Requirements 16
Site Selection Guidelines 17
Rack Requirements 17
Router Environmental Requirements 17
Power Guidelines and Requirements 18
Network Cabling Specifications 18
Console Port Connections 19
EIA/TIA-232 19
USB Serial Console 19
Console Port Considerations 20
Preparing for Network Connections 20
Ethernet Connections 20
Required Tools and Equipment for Installation and Maintenance 20
Installation Checklist 21
Creating a Site Log 22
CHAPTER 3 Installing and Connecting the Router 23
Installing and Connecting the Router 23
Safety Warnings 23
What You Need to Know 23
Before You Begin 24
Unpacking the Router 24
Installing the Router 24
Installing a Cisco 1100 Series ISR 24
Attaching the Chassis 25
Mounting on the Wall 25
Attaching DIN Rail Brackets 28
Mounting the Router in a Rack 30
Setting the Chassis on a Desktop 31
Chassis Grounding 31
Connecting to a Console Terminal or Modem 32
Connecting to the Serial Port with Microsoft Windows 33
Connecting to the Console Port with Mac OS X 34
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
iv
Contents

Connecting to the Console Port with Linux 34
Installing the Cisco Microsoft Windows USB Device Driver 35
Installing the Cisco Microsoft Windows XP USB Driver 35
Installing the Cisco Microsoft Windows 2000 USB Driver 36
Installing the Cisco Microsoft Windows Vista USB Driver 36
Installing the Cisco Microsoft Windows 8/Windows 10 USB Driver 36
Uninstalling the Cisco Microsoft Windows USB Driver 37
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 37
Uninstalling the Cisco Microsoft Windows Vista USB Driver 38
Connecting WAN and LAN Interfaces 38
Ports and Cabling 39
Connection Procedures and Precautions 39
CHAPTER 4 ROM Monitor Overview and Basic Procedures 41
ROM Monitor Overview and Basic Procedures 41
ROM Monitor Overview 41
Entering ROM Monitor Mode 42
Checking the Current ROMmon Version 42
Commonly Used ROM Monitor Commands 43
Displaying the Available ROM Monitor Commands 43
Examples 44
Changing the ROM Monitor Prompt 44
Displaying the Configuration Register Setting 44
Environment Variable Settings 45
Frequently Used Environmental Variables 45
Displaying Environment Variable Settings 45
Entering Environment Variable Settings 46
Saving Environment Variable Settings 46
Exiting ROM Monitor Mode 46
Configuration Example 47
Upgrading the ROMmon for a Router 47
CHAPTER 5 Installing and Upgrading Internal Modules and FRUs 49
Installing and Upgrading Internal Modules and FRUs 49
Safety Warnings 49
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
v
Contents

Accessing Internal Modules 49
Replacing the Chassis Cover 50
Removing the Cover 50
Replacing the Cover 51
Locating Internal and External Slots for Modules 51
Installing the Internal PoE Daughter Card 52
Removing and Replacing the Internal PoE Daughter Card 53
Removing and Replacing the USB Flash Token Memory Stick 53
AC Power Supplies 54
Overview of the AC Power Supply 54
Installing and Removing SFP Modules 54
Installing SFPs 61
Removing SFP Modules 61
CHAPTER 6 Declaration of Conformity for RF Exposure 63
Declaration of Conformity of RF Exposure 63
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
vi
Contents

Preface
•Audience, page vii
•Document Organization, page vii
•Document Conventions, page viii
•Related Documentation, page ix
•Obtaining Documentation and Submitting a Service Request, page x
Audience
This guide is intended for Cisco equipment providers and service personnel who are technically knowledgeable
and familiar with Cisco routers and Cisco IOS software and features. They would understand how to install,
configure, and maintain the router, and they should be familiar with electronic circuitry and wiring practices,
and have experience as an electronic or electromechanical technician. This guide identifies certain procedures
that should be performed only by trained and qualified personnel.
Document Organization
This guide includes the following chapters and appendix::
DescriptionTitleChapter//Appendix
Describes the router chassis views, general hardware
features, slot, port and interface information, and LED
indicators.
Overview of the Cisco
1100 Series ISR
Chapter 1
Describes site requirements and the equipment needed
to install the router.
Preparing for Router
Installation
Chapter 2
Describes how to install and connect the router to LAN
and WAN.
Installing and
Connecting the Router
Chapter 3
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
vii

DescriptionTitleChapter//Appendix
Provides an overview of ROM Monitor concepts and
operations.
ROM Monitor Overview
and Basic Procedures
Chapter 4
Describes how to install and upgrade internal modules
and field replaceable units1on the router.
Installing and Upgrading
Internal Modules and
FRUs
Chapter 5
1Field Replaceable Unit
Document Conventions
This document uses the following conventions:
DescriptionConvention
Both the ^symbol and Ctrl represent the Control (Ctrl) key on a keyboard.
For example, the key combination ^D or Ctrl-D means that you hold
down the Control key while you press the D key. (Keys are indicated in
capital letters but are not case sensitive.)
^ or Ctrl
Commands and keywords and user-entered text appear in bold font.bold font
Document titles, new or emphasized terms, and arguments for which you
supply values are in italic font.
Italic font
Terminal sessions and information the system displays appear in courier
font.
Courier font
Bold Courier font indicates text that the user must enter.Bold Courier font
Elements in square brackets are optional.[x]
An ellipsis (three consecutive nonbolded periods without spaces) after
a syntax element indicates that the element can be repeated.
...
A vertical line, called a pipe, indicates a choice within a set of keywords
or arguments.
|
Optional alternative keywords are grouped in brackets and separated by
vertical bars.
[x | y]
Required alternative keywords are grouped in braces and separated by
vertical bars.
{x | y}
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
viii
Preface
Document Conventions

DescriptionConvention
Nested set of square brackets or braces indicate optional or required
choices within optional or required elements. Braces and a vertical bar
within square brackets indicate a required choice within an optional
element.
[x {y | z}]
A nonquoted set of characters. Do not use quotation marks around the
string or the string will include the quotation marks.
string
Nonprinting characters such as passwords are in angle brackets.< >
Default responses to system prompts are in square brackets.[ ]
An exclamation point (!) or a pound sign (#) at the beginning of a line
of code indicates a comment line.
!, #
Reader Alert Conventions
This document uses the following conventions for reader alerts:
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
manual.
Note
Means the following information will help you solve a problem.
Tip
Means reader be careful. In this situation, you might do something that could result in equipment damage
or loss of data.
Caution
Means the described action saves time. You can save time by performing the action described in the
paragraph.
Timesaver
Means reader be warned. In this situation, you might perform an action that could result in bodily
injury.
Warning
Related Documentation
For related release documentation, see the following URLs:
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
ix
Preface
Related Documentation

Cisco 1100 Series ISR Release Notes: https://www.cisco.com/c/en/us/td/docs/routers/access/1100/release/
16-6-2/isr1k-rel-notes-xe-16-6.html
Cisco 1100 Series ISR Configuration Guide - https://www.cisco.com/c/en/us/td/docs/routers/access/1100/
software/configuration/guide/cisco_1100_series_swcfg.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information,
see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/
whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical
documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The
RSS feeds are a free service.
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
x
Preface
Obtaining Documentation and Submitting a Service Request