Cisco Profile Series User manual

Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Cisco 800M Series Integrated Services
Router Hardware Installation Guide
August 29, 2015

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display
output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in
illustrative content is unintentional and coincidental.
Cisco 800M Series Integrated Services Router Hardware Installation Guide
© 2015 Cisco Systems, Inc. All rights reserved.

i
Cisco 800M Series Integrated Services Router Hardware Installation Guide
CONTENTS
Preface vii
Objective vii
Audience vii
Organization vii
Conventions viii
Related Documentation xvi
Searching Cisco Documents xvi
Obtaining Documentation and Submitting a Service Request xvi
Product Overview 1-1
General Description 1-1
Hardware Features 1-3
Platform Features 1-4
LEDs 1-4
Memory 1-5
Power Supply 1-5
Reset Button 1-5
Kensington Lock 1-5
SKU Information 1-5
Installing the Router 2-1
Equipment, Tools, and Connections 2-2
Items Shipped with your Router 2-2
Connections 2-2
Ethernet Devices 2-2
Installing the Router 2-3
Warnings 2-3
Installing on a Table 2-4
Mounting on a Wall 2-4
Mounting on a Rack 2-6
Connecting the Router 3-1
Preparing to Connect the Router 3-1
Connecting a PC, Server, or Workstation 3-2

Contents
ii
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Connecting an External Ethernet Switch 3-3
Connecting a Terminal or PC to the Console Port 3-4
Verifying Connections 3-5
Initial Configuration 4-1
Cisco IOS CLI 4-1
Setup Command Facility 4-1
Verifying the Initial Configuration 4-4
Technical Specifications A-1
Router Specifications A-1
Mean Time Between Failure Ground Benign Environment A-4

vii
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Preface
This preface describes the objectives, audience, organization, and conventions of this guide and
describes related documents that have additional information. It contains the following sections:
•Objective, page vii
•Audience, page vii
•Organization, page vii
•Conventions, page viii
•Related Documentation, page xvi
•Searching Cisco Documents, page xvi
•Obtaining Documentation and Submitting a Service Request, page xvi
Objective
This guide provides an overview and explains how to install, connect, and perform initial configuration
for the Cisco 800M Series Integrated Services Routers (ISRs).
Audience
This guide is intended for Cisco equipment providers who are technically knowledgeable and familiar
with Cisco routers and Cisco IOS software and features.
Organization
This guide is organized into the following chapters and appendix.
Chapter Name Description
Chapter 1 Chapter 1, “Product Overview” Describes the router models and the
hardware features available.

viii
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Conventions
This section describes the conventions used in this guide.
Note Means reader take note. Notes contain helpful suggestions or references to additional information and
material.
Caution This symbol means reader be careful. In this situation, you might do something that could result in
equipment damage or loss of data.
Tip Means the following information will help you solve a problem. The tip information might not be
troubleshooting or even an action, but could be useful information.
Chapter 2 Chapter 2, “Installing the Router” Lists the items shipped with the router, the
equipment and tools necessary for
installing the router, the safety warnings
and guidelines, and the procedures for
installing the router.
Chapter 3 Chapter 3, “Connecting the Router” Describes typical connections for the
router, procedures for connecting the
router to various devices, and how to
verify the connections.
Chapter 4 Chapter 4, “Initial Configuration” Provides the procedures for initially
configuring the router settings.
Appendix A Appendix A, “Technical Specifications” Provides the router, port, and cabling
specifications.

ix
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device.
Statement 1071
SAVE THESE INSTRUCTIONS
Waarschuwing
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de
waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt
raadplegen.
BEWAAR DEZE INSTRUCTIES
Varoitus
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin
käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu
onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen
mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien
lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
Attention
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant
entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez
conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des
avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,
référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
Warnung
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen
kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und
den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder
Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten
Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.

x
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Avvertenza
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti.
Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le
traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
Advarsel
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du
begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med
elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten
av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne
enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de
lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos
perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de
prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para
localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
¡Advertencia!
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el
número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña
a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
Varning!
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av
varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna
anordning.
SPARA DESSA ANVISNINGAR

xi
Cisco 800M Series Integrated Services Router Hardware Installation Guide

xii
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões
corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os
circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o
número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de
segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
Advarsel
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for
legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de
involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til
undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de
oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER

xiii
Cisco 800M Series Integrated Services Router Hardware Installation Guide

xiv
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Warning When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical
Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown
on the code) for any other electrical devices than products designated by CISCO. The use of cables
that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the
code) is not limited to CISCO-designated products. Statement 371
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions . Statement 1015
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available . Statement 1024

xv
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Warning If the symbol of suitability with an overlaid cross appears above a port, you must not connect the port
to a public network that follows the European Union standards. Connecting the port to this type of
public network can cause severe personal injury or can damage the unit. Statement 1031
Warning Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)
requirements in IEC 60950 based safety standards. Statement 1033
Warning Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool. Statement 1035
Warning Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations. Statement 1036
Warning Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface. Statement 1037
Warning Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote
risk of electric shock from lightning. Statement 1038
Warning When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046
Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or
where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, because they may cause serious injury or death. For
proper installation and grounding of the antenna, please refer to national and local codes (for
example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code,
Section 54). Statement 1052
Warning No user-serviceable parts inside. Do not open. Statement 1073
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030

xvi
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning The covers are an integral part of the safety design of the product. Do not operate the unit without the
covers installed. Statement 1077
Warning Hot surface. Statement 1079
Related Documentation
•Regulatory Compliance and Safety Information for Cisco 800 Series Routers
•Cisco 800M Series ISR Software Configuration Guide
Searching Cisco Documents
To search an HTML document using a web browser, press Ctrl-F (Windows) or Cmd-F (Apple). In most
browsers, the option to search whole words only, invoke case sensitivity, or search forward and backward
is also available.
To search a PDF document in Adobe Reader, use the basic Find toolbar (Ctrl-F) or the Full Reader
Search window (Shift-Ctrl-F). Use the Find toolbar to find words or phrases within a specific document.
Use the Full Reader Search window to search multiple PDF files simultaneously and to change case
sensitivity and other options. Adobe Reader’s online help has more information about how to search PDF
documents.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS Version 2.0.

CHAPTER
1-1
Cisco 800M Series Integrated Services Router Hardware Installation Guide
1
Product Overview
This chapter provides an overview of the features available for the Cisco 800M Series Integrated
Services Router (ISR). Cisco 800M Series ISRs have the following variants:
•C841M-4X-JSEC/K9
•C841M-4X-JAIS/K9
•C841M-8X-JAIS/K9
Cisco C841M-4X-JSEC/K9 and C841M-4X-JAIS/K9 ISRs have four GE LAN ports and Cisco
C841M-8X-JAIS/K9 ISR has eight GE LAN ports. For more information about the different SKUs
available for the two variants, see “Cisco 800M Series ISR SKUs”
Note For compliance and safety information, see Regulatory Compliance and Safety Informatio“Cisco 800M
Series ISR SKUs”n for Cisco 800 Series Routers.
This chapter contains the following sections:
•General Description, page 1-1
•Hardware Features, page 1-3
•SKU Information, page 1-5
General Description
Cisco 800M Series ISRs are entry level branch routers that provide secure network connectivity for small
offices to a central location. The Cisco 800M Series ISR provides Gigabit Ethernet WAN connectivity
option through two Gigabit Ethernet WAN ports. For LAN connectivity, the Cisco 800M Series ISR has
four or eight Gigabit Ethernet LAN ports. The Cisco 800M Series ISR can be powered by an (included)
external AC adapter.

1-2
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
General Description
Figure 1-1 Cisco C841M-4X-JSEC/K9 and C841M-4X-JAIS/K9 ISR Front View
Figure 1-2 Cisco C841M-4X-JSEC/K9 and C841M-4X-JAIS/K9 ISR Rear View
373532
1
1LEDs
373533
1
10
6
7
2
3
4
9
5
8
1WIM slot (panel not removable) 6Console
2WIM slot (panel not removable) 7USB
3Reset/Push Button 8Power Cord Lock
4WA N P o r t s 9Power Port
5LAN Ports 10 Kensington security slot

1-3
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Hardware Features
Figure 1-3 Cisco C841M-8X-JAIS/K9 ISR Front View
Figure 1-4 Cisco C841M-8X-JAIS/K9 ISR Rear View
Hardware Features
The Cisco 800M Series ISR supports the following hardware features:
•Platform Features, page 1-4
•Memory, page 1-5
•Power Supply, page 1-5
•Reset Button, page 1-5
•Kensington Lock, page 1-5
373534
373535
1
2
5
6
7
3
4
910
8
1WIM slot (panel not removable) 6Console
2WIM slot (panel not removable) 7USB
3Reset/Push Button 8Power Cord Lock
4WA N P o r t s 9Power Port
5LAN Ports 10 Kensington security slot

1-4
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Hardware Features
Platform Features
The Cisco 800M Series ISR have the following platform features:
•2x GE Enabled WAN (1000/100/10 Base T)
•512 MB DRAM for Cisco C841M-4X-JSEC/K9 and Cisco C841M-4X-JAIS/K9 ISRs
•1 GB DRAM for Cisco C841M-8X-JAIS/K9 ISR
•8 MB of boot flash
•2 GB NAND Flash
•AC Power (Adapter (100 -240V AC input and 12V 2.5 A DC output)
•Built-in Grounding
•Rack Mount, Wall Mount, or Desktop Mount
•LED indicators for the platform
LEDs
The Cisco 800M Series ISR has LEDs located in the front of the router. The Cisco C841M-4X-JSEC/K9
ISR and Cisco C841M-4X-JAIS/K9 ISRs have four LAN ports and also four LEDs (0-3) corresponding
to each LAN port. The Cisco C841M-8X-JAIS/K9 ISR has eight LAN ports which has eight LEDs (0-7)
corresponding to eight LAN ports. Cisco C841M-4X-JSEC/K9, Cisco C841M-4X-JAIS/K9, and Cisco
C841M-8X-JAIS/K9 ISRs have two WAN LEDs each.
There are two LEDs to represent PPP and VPN as well.
Table 1-1 describes the LEDs for the Cisco 800M series ISR.
Table 1-1 Cisco 800M Series ISR Router LED Descriptions
LED LED Color or Status Description
SYS Flashing System is running ROMMON mode or
booting IOS.
Solid Green IOS is functioning normally.
Off System is powered off.
LAN Solid Green Network is linked on LAN port.
Blinking Green Network traffic is active on LAN port.
Off No network connectivity.
WAN Solid Green Network is linked to WAN port.
Blinking Green Network traffic is active on WAN port.
Off No network connectivity.
VPN OK Green A minimum of one VPN session is
active.
Off VPN is off.
PPP OK Green A minimum of one PPP session is active.
Off PPP is off.

1-5
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Hardware Features
Memory
The Cisco 800M Series ISR supports 8 MB of boot flash and 2 GB of NAND Flash. Cisco
C841M-4X-JSEC/K9 and Cisco C841M-4X-JAIS/K9 ISRs support 512 MB of DRAM and Cisco
C841M-8X-JAIS/K9 ISR supports 1 GB of DRAM.
Power Supply
The configuration is AC adapter that supports 100 -240 AC input and 12V 2.5 A DC output.
Reset Button
The Reset button is used to restore the router to the factory default configuration or to load a custom
configuration file. There are two different ways to do this:
•By pressing the Reset button within 5 seconds of powering up the router.
•By pressing the Reset button for 5 seconds while running IOS software.
Kensington Lock
A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.
A Kensington lock feature is placed on the unit in a location acceptable to Cisco product marketing.
SKU Information
Table 1-2 lists the different SKUs for Cisco 800M Series ISR. 4 port SKU and 8 port SKU use the same
PCB.
Table 1-2 Cisco 800M Series ISR SKUs
SKU ID Description
C841M-4X-JAIS/K9 Cisco C841M-4X-JAIS/K9 ISR with 4 port GE LAN and 2
port GE WAN and Cisco Advanced IP Services IOS image.
C841M-4X-JSEC/K9 Cisco C841M-4X-JSEC/K9 ISR with 4 port GE LAN and
2 port GE WAN and Cisco Advanced Security IOS image.
C841M-8X-JAIS/K9 Cisco C841M-8X-JAIS/K9 ISR with 8 port GE LAN and 2
port GE WAN and Cisco Advanced IP Services IOS image.

1-6
Cisco 800M Series Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Hardware Features