Cisco SR520-FE-K9 Instruction Manual

Cisco SRP500 Series Services Ready Platforms
(SRP520 Models)
ADMINISTRATION
GUIDE

© 2012 Cisco Systems, Inc. All rights reserved. 78-20691-01
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found
at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. (1005R)

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 3
Contents
Chapter 1: Introducing the SRP500 Series Services Ready Platform (SRP520
Models) 10
Feature Overview 10
Product Overview 11
Model Numbers 11
Front Panel 11
SRP521W Front Panel 11
SRP526W / SRP527W Front Panel 12
Front Panel Lights 12
Back Panel 13
SRP521W Back Panel 13
SRP526W / SRP527W Back Panel 13
Back Panel Descriptions 14
Side View 15
Top View 16
Default Settings 17
Chapter 2: Getting Started with the Configuration Utility 18
Logging In to the Configuration Utility 18
Overview of the Configuration Utility 19
Main Window Areas 19
Configuration Utility Icons 20
Chapter 3: The Quick Setup Menu 21
Basic Configuration Setup 21
WAN Setup (Ethernet) 21
WAN Setup (ADSL) 22
LAN Setup 22
Wireless Setup 22
Remote Provisioning 23
Advanced Configuration Setup 23
Voice 23
Mobile Network Setup 23

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 4
Contents
Firewall 23
NAT 24
Chapter 4: Setting up the Interfaces of the Services Ready Platforms 25
Setting up the WAN Interface 25
Internet Setup 26
Adding a Subinterface 29
Encapsulation Settings 32
IPoA Settings 32
PPPoE Settings 33
PPPoA Settings 34
Internet Options 35
Mobile Network 36
Failover and Recovery 40
Setting up the VLAN Interfaces and LAN Ports 42
DHCP Server 42
VLAN Settings 45
Port Settings 47
Setting up the Wireless LAN 48
Basic Wireless Settings 49
Wireless Protected Setup 55
WPS Method 1 55
WPS Method 2 56
WPS Method 3 56
Wireless MAC Filter 56
Advanced Wireless Settings 58
WMM Setting 61
Using the Management Interface 61
Chapter 5: Configuring the Network 62
Routing 63
Static Routes 63
RIP 64

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 5
Contents
Intervlan Routing 66
NAT 66
NAT Setting 66
Port Forwarding 67
Port Range Triggering 69
QoS 71
QoS Bandwidth Control 71
QoS Policy 72
CoS To Queue 74
DSCP To Queue 75
Firewall 75
Firewall Filter 75
Internet Access Control 77
PPPoE Relay 79
DDNS 80
DMZ 82
IGMP 83
UPnP 84
CDP Setting 85
Chapter 6: Configuring Voice 87
Configuring Voice Services 87
Understanding Voice Port Operations 87
SRP Voice Features 88
Supported Codecs 88
SIP Proxy Redundancy 89
Other SRP Voice Features 90
Registering to the Service Provider 95
Managing Caller ID Services 97
Optimizing Fax Completion Rates 99
Fax Troubleshooting 100
Silence Suppression and Comfort Noise Generation 101

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 6
Contents
Configuring Dial Plans 102
About Dial Plans 102
Digit Sequences 102
Digit Sequence Examples 104
Acceptance and Transmission the Dialed Digits 106
Dial Plan Timer (Off-Hook Timer) 107
Syntax for the Dial Plan Timer 107
Examples for the Dial Plan Timer 108
Interdigit Long Timer (Incomplete Entry Timer) 108
Syntax for the Interdigit Long Timer 109
Example for the Interdigit Long Timer 109
Interdigit Short Timer (Complete Entry Timer) 109
Syntax for the Interdigit Short Timer 109
Examples for the Interdigit Short Timer 109
Editing Dial Plans 110
Entering the Line Interface Dial Plan 110
Resetting the Control Timers 110
Secure Call Implementation 111
Enabling Secure Calls 111
Secure Call Details 112
Using a Mini-Certificate 113
Generating a Mini Certificate 114
Configuring Voice Settings 115
Info Page 115
Product Information 115
System Status 116
Line Status 117
System Page 119
System Configuration 119
Miscellaneous Settings 119
SIP Page 120
SIP Parameters 120
SIP Timer Values 123
Response Status Code Handling 125
RTP Parameters 125
SDP Payload Types 127
NAT Support Parameters 128
Provisioning Page 131
Configuration Profile 131

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 7
Contents
Firmware Upgrade 134
General Purpose Parameters 135
Regional Page 136
Defining Ring and Cadence and Tone Scripts 136
Call Progress Tones 138
Distinctive Ring Patterns 141
Distinctive Call Waiting Tone Patterns 141
Distinctive Ring/CWT Pattern Names 142
Ring and Call Waiting Tone Spec 144
Control Timer Values (sec) 144
Vertical Service Activation Codes 147
Vertical Service Announcement Codes 153
Outbound Call Codec Selection Codes 153
Miscellaneous 154
Line Pages (1–2) 156
Line Enable 157
Streaming Audio Server (SAS) 157
NAT Settings 158
Network Settings 159
SIP Settings 160
Call Feature Settings 164
Proxy and Registration 166
Subscriber Information 168
Supplementary Service Subscription 169
Audio Configuration 171
Dial Plan 176
FXS Port Polarity Configuration 177
177
User Pages (1–2) 178
Call Forward Settings 178
Selective Call Forward Settings 179
Speed Dial Settings 179
Supplementary Service Settings 180
Distinctive RIng Settings 182
Ring Settings 182
Chapter 7: Configuring VPN 183
IKE Policy 183
IPSec Policy 185

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 8
Contents
GRE Tunnel 188
VPN Passthrough 190
Cisco VPN Server 191
Configuring Users 194
Chapter 8: Administration Settings 195
Web Access Management 196
Remote Management 197
TR069 197
SNMP 199
SNMP Port Descriptions 200
Local TFTP 201
Time Setup 202
Setup Wizard 203
User List 204
User Privilege Control 204
Logging 205
Factory Defaults 206
Firmware Upgrade 206
Backup & Restore 207
Backup Configuration 207
Restore Configuration 207
Reboot 208
Status 208
Switch Setting 208
Chapter 9: Using Services Ready Platform Diagnostics 210
Ping Test 210
Traceroute Test 211
Detect Active LAN Clients 211

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 9
Contents
Chapter 10: Viewing the Services Ready Platforms Status 212
Router Settings 213
Firewall Status 214
Interface Information 216
Wireless Network Status 217
Wireless Client Information 218
Mobile Network Status 218
DHCP Server Information 220
QoS Status 221
Routing Table 222
ARP Table 222
RIP Status 223
IGMP Status 223
VPN Status 224
CDP Neighbor Information 225
Appendix A: Specifications 226
Appendix B: Where to Go From Here 228

1
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 10
Introducing the SRP500 Series Services
Ready Platform (SRP520 Models)
Thank you for choosing the Cisco SRP500 Series Services Ready Platforms
(SRP520 Models). The SRP500 Series are flexible devices that enable small
businesses to connect to a variety of services (high quality data, hosted voice, and
security services) offered by service providers.
This chapter provides information to familiarize you with the product. It consists of
these sections:
•Feature Overview
•Product Overview
For information about how to physically install the SRP and how to use the Setup
Wizard to initially configure it, see the Cisco SRP500 Series Services Ready
Platforms Quick Start Guide (SRP520 Models) at
www.cisco.com/go/srp500resources.
Feature Overview
Thank you for choosing the Cisco Services Ready Platform SRP 500 Series
(SRP520 Models).
The SRP 500 Series platforms includes these features:
•Intelligence to support voice, data, security, and application services.
•Industry-leading Session Initiation Protocol (SIP) stack to deliver clear, high-
quality voice service.
•Interoperability with popular soft switches and voice gateways.
•Integrated security, VPN capabilities, and an 802.11n wireless access point.
•Standards-based provisioning for streamlined deployments.