Cisco TelePresence SX10 User manual

Amcom Cisco SX10 Quick Guide
Remote Control and the Home Screen
Remote Control
1. Volume and Zoom control.
2. Field selector / Cursor keys.
3. OK / Enter key.
4. Go back one step / Backspace.
5. Microphone mute / Unmute.
6. Place a call / Accept incoming call.
7. Reject incoming call / End call /
Cancel / Back to Home screen
(outside calls).
8. Keypad
Home Screen
A. Access Settings, Standby mode
and the Do No Disturb features.
B. Access the Camera Control menu.
C. Place a Call.
D. Share Content.
Place a Call
1. Select Call from the home
screen and press OK or press the
green Call button on the remote.
2. Use the Cursor keys to select the
Search or Dial eld, as outlined.
3. Press the corresponding keys on
the remote to enter a number.
4. Tap the green Call button to place
the call.
5. Press the red End Call button or
use the Cursor keys to select End.
6. Press OK to terminate the call.
Enable Do Not Disturb
1 2 3
4 5 6
7 8 9
*0#
.@
pqrs tuv wxyz
defabc
ghi jkl mno
1
2
4 5
7
8
A B
C D
Operating Tips
Use the Cursor controls to move about the
screen and press OK / Enter to open the
selected menu eld.
Use the Cancel key to exit a menu (and return to
the Home screen) undoing any changes.
Use the Back key to go just one step back.
1. Using the remote, select the eld
in the upper left corner of the
Home screen and press OK.
3
6
2. Select Available or Do Not Disturb.
3. Press OK to save and exit
the menu.
Operating Tips
Your system can be set to ignore
incoming calls, however, you may
still call others.
All manuals and user guides at all-guides.com
all-guides.com

For more support on Amcom Cloud Collaboration visit:
http://www.amcom.com.au/support/acc
Amcom Cisco SX10 Quick Guide
Share Content
1. Ensure your presentation source
is connected and on.
2. Select Share and press OK on
the remote control.
3. Select the source to be shared and
press OK on the remote control.
4. To stop sharing content, select
Stop Sharing and press OK on the
remote control.
Make Someone a Favourite
1. Make sure Call is selected and
press OK.
2. Select Recents then the contact
you wish to favourite.
3. Press OK.
4. Move the cursor to the right so
that the green Call eld is selected
and select the More eld ( ).
5. Select Mark as Favourite.
6. Press OK to save the contact as
a favourite.
...
View Camera Settings
1. Select the Camera icon in the
upper right corner of the screen.
2. Press OK.
3. You can now adjust the zoom, pan
and tilt of the camera and congure
the self view image.
4. Press the Back button on the remote
to save any changes and exit.
A
B
A. Use the volume controls (- +) to
adjust the zoom.
B. Use the cursor keys to control
the pan and tilt of the camera.
022315 Amcom Cisco SX10 Guide
All manuals and user guides at all-guides.com