Cisco UCS B440 M2 System manual

CISCO SYSTEMS PUBLICATION HISTORY
170 WEST TASMAN DR.
SAN JOSE, CA, 95134 REV B.1 MAY 6, 2014
WWW.CISCO.COM
Spec Sheet
Cisco UCS B440 M2
Blade Server

Cisco UCS B440 M2 Blade Server 2
CONTENTS
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
DETAILED VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chassis Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
BASE SERVER STANDARD CAPABILITIES and FEATURES . . . . . . . . . . . . . . . . . 5
CONFIGURING the SERVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 1 VERIFY BASE SKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STEP 2 CHOOSE CPU(S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
STEP 3 CHOOSE MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
STEP 4 CHOOSE HARD DISK DRIVES or SOLID-STATE DRIVES . . . . . . . . . . . . . . . . . . . . . . 13
STEP 5 CHOOSE RAID CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
STEP 6 CHOOSE MEZZANINE OPTION CARD(S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
STEP 7 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE . . . . . . . . . . . . . . . . 17
STEP 8 CHOOSE OPERATING SYSTEM MEDIA KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
STEP 9 CHOOSE SERVICE and SUPPORT LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ORDER OPTIONAL KVM CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
SUPPLEMENTAL MATERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Motherboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DIMM and CPU Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Memory Population Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Network Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Cisco UCS B440 M2 Blade Server
OVERVIEW
3
OVERVIEW
The Cisco® UCS B440 M2 Blade Server is a four-socket, full-width blade server that combines the
performance of the Intel E7-4800/8800 series processors with up to four small form factor (SFF) hard disk
drives (HDDs) or solid-state drives (SSDs), 32 DIMM slots that support up to 1 terabyte (TB) of memory, and
two dual-port mezzanine card connections for up to 40 Gbps of redundant I/O throughput. The Cisco UCS
B440 M2 server is designed to power the most demanding enterprise applications. The UCS B440 M2 server is
shown in Figure 1.
Figure 1 Cisco UCS B440 M2 Blade Server

Cisco UCS B440 M2 Blade Server
4
DETAILED VIEWS
DETAILED VIEWS
Chassis Front View
Figure 2 shows the front of the Cisco UCS B440 M2 Blade Server.
Figure 2 Chassis Front View
1Hard drive bay 1 9Right ejector thumbscrew
2Hard drive bay 2 10 Power button and LED
3Hard drive bay 3 11 Network link status LED
4Hard drive bay 4 12 Blade health LED
5RAID battery backup module (BBU) 13 Local console connection1
Notes . . .
1. For more information regarding the KVM cable connection, see ORDER OPTIONAL KVM CABLE on
page 26
6Left ejector thumbscrew 14 Reset button access
7Left ejector handle 15 Beaconing button and LED
8Right ejector handle

Cisco UCS B440 M2 Blade Server
BASE SERVER STANDARD CAPABILITIES and FEATURES
5
BASE SERVER STANDARD CAPABILITIES and FEATURES
Ta b l e 1 lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in CONFIGURING the SERVER on page 6.
Table 1 Capabilities and Features
Capability/Feature Description
Chassis The B440 M2 Blade Server mounts in a Cisco UCS 5100-series chassis
CPU Either 2 or 4 Intel® Xeon® E7-4800 or E7-8800 series processors
Chipset Intel® 7510 chipset
Memory 32 slots for registered DIMMs, up to 1 TB.
Expansion slots Two dual-port mezzanine slots are provided
Storage controller LSI SAS2108 6G SAS RAID controller
■RAID 0 and 1
■RAID 5 and 6 are optionally available through a license key upgrade
■Battery backup unit for 1 GB write cache is optionally available
Internal storage devices Up to four optional front-accessible, hot-swappable hard disk drives (HDDs)
or solid-state drives (SSDs).
Video The server CIMC chip includes a Matrox G200 core. The first 8 MB of memory
are allocated to the video core.
Interfaces One front-accessible console connector (see ORDER OPTIONAL KVM CABLE
on page 26)
Power subsystem Integrated in the Cisco UCS 5100 series chassis
Fans Integrated in the Cisco UCS 5100 series chassis
Integrated management
processor
The built-in Cisco Integrated Management Controller (CIMC) GUI or CLI
interface enables you to monitor the server inventory, health, and system
event logs.

Cisco UCS B440 M2 Blade Server
6
CONFIGURING the SERVER
CONFIGURING the SERVER
Follow these steps to configure the Cisco UCS B440 M2 Server:
■STEP 1 VERIFY BASE SKU, page 7
■STEP 2 CHOOSE CPU(S), page 8
■STEP 3 CHOOSE MEMORY, page 9
■STEP 4 CHOOSE HARD DISK DRIVES or SOLID-STATE DRIVES, page 13
■STEP 6 CHOOSE MEZZANINE OPTION CARD(S), page 15
■STEP 7 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE, page 17
■STEP 8 CHOOSE OPERATING SYSTEM MEDIA KIT, page 20
■STEP 9 CHOOSE SERVICE and SUPPORT LEVEL, page 21

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
7
STEP 1 VERIFY BASE SKU
Verify the product ID (PID) of the base server as shown in Ta b l e 2.
The B440-BASE-M2 base server:
■Does not include CPUs, memory DIMMs, SSDs, HDDs, or mezzanine cards.
Table 2 PID of the Base B440 M2 Server
Product ID (PID) Description
B440-BASE-M2 UCS B440 M2 Blade Server w/o CPU, memory, HDD, mezzanine
NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.

Cisco UCS B440 M2 Blade Server
8
CONFIGURING the SERVER
STEP 2 CHOOSE CPU(S)
The standard CPU features are:
■Intel Xeon E7-4800 or E7-8800 series CPUs
■Intel 7510 chipset
■Cache size of 18, 24, or 30 MB
Choose CPUs
The available CPUs are listed in Ta b l e 3.
Approved Configurations
(1) Two-CPU Configuration
■Choose two identical CPUs from any one row in Ta b l e 3.
(2) Four-CPU Configuration
■Choose four identical CPUs from any one row in Ta b l e 3.
Caveats
■You must choose either two identical CPUs or four identical CPUs.
Table 3 Available CPUs: Intel Xeon E7-48xx/8867L Family
Product ID (PID) Intel
Number
Clock
Freq
(GHz)
Power
(W)
Cache
Size (MB) Cores QPI
Highest DDR3
DIMM Clock
Support (MHz)
UCS-CPU-E78867L E7-8867L 2.13 105 30 10 6.40 13331
UCS-CPU-E78837 E7-8837 2.66 130 24 86.40 13331
UCS-CPU-E74870 E7-4870 2.40 130 30 10 6.40 13331
Notes . . .
1. Maximum operational speed = 1066 MHz
UCS-CPU-E74860 E7-4860 2.26 130 24 10 6.40 13331
UCS-CPU-E74850 E7-4850 2.00 130 24 10 6.40 13331
UCS-CPU-E74830 E7-4830 2.13 105 24 86.40 13331
UCS-CPU-E74807 E7-4807 1.86 95 18 64.80 13332
2. Maximum operational speed = 800 MHz

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
9
STEP 3 CHOOSE MEMORY
The standard memory features are:
■DIMMs
— Maximum memory bandwidth: 800 MHz for E7-4807, 1066 MHz for all other CPUs
— Ranks per DIMM: 1, 2, or 4
— Operational voltage: 1.35 V
— Registered DIMM (RDIMM)
— Mirroring option
— Advanced error correcting code (ECC)
— Double device data correction (DDDC)
■Each CPU controls four DDR3 channels. Each of the channels controls a matched pair of
DIMMs. The maximum number of DIMMs that can be installed per CPU is 8 (4 DIMM kits). See
Figure 3.
NOTE: DDDC support applies to x4 DIMMs only.
NOTE: Memory mirroring is supported and settable using the UCSM Service Profile
“Memory RAS Configuration” setting.

Cisco UCS B440 M2 Blade Server
10
CONFIGURING the SERVER
Figure 3 B440 M2 Memory Organization

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
11
Select DIMMs
DIMMs are available as two-DIMM kits. Each of the product IDs in Ta b l e 4 specifies two DIMMs.
Approved Configurations
(1) 2-CPU Configuration
■16 DIMMs capacity total
■Select two or four DIMM kits ( 4 or 8 DIMMs) per CPU. The DIMMs for each CPU will be placed
by the factory as shown in Tab l e 5.
Table 4 Available DDR3 DIMMs
Product ID (PID) PID Description Voltage Ranks/
DIMM
DIMM Pair Kit Options (2 DIMMs per kit)
UCS-MR-2X041RX-C 2x4GB DDR3 1333-MHz RDIMM/PC3-10600/1R/x4/1.35v 1.35 V 1
UCS-MR-2X082RX-C 2x8GB DDR3 1333-MHz RDIMM/PC3-10600/2R/x4/1.35v 1.35 V 2
UCS-MR-2x162RX-C 2x16GB DDR3-1333-MHz RDIMM/PC3-10600/2R/x4/1.35v 1.35 V 2
UCS-MR-2X164RX-D 2x16GB NHS DDR3-1333-MHz RDIMM/PC3-10600/4R/x4/1.35v 1.35 V 4
UCS-MR-2X324RX-C 2x32GB DDR3 1333-MHz RDIMM/PC3-10600/4R/x4/1.35V 1.35 V 4
Table 5 2-CPU Configuration DIMM Placement
Number of DIMMs
per CPU
DIMM Placement in Numbered/Colored DIMM Slots
(see Figure 6 on page 28)
41
Notes . . .
1. Two UCS-MR-2X041RX-C, UCS-MR-2X082RX-C, UCS-MR-2X164RX-D, or UCS-MR-2X324RX-C DIMM kits per CPU
(A0, A1) - blue slots; (C0, C1) - white slots
82
2. Four UCS-MR-2X041RX-C, UCS-MR-2X082RX-C, UCS-MR-2X164RX-D, or UCS-MR-2X324RX-C DIMM kits per CPU, or
one of these combinations: (1) Two UCS-MR-2X082RX-C and two UCS-MR-2X164RX-D DIMM kits per CPU, or (2)
Two UCS-MR-2X082RX-C and two UCS-MR-2X324RX-C DIMM kits per CPU, or (3) Two UCS-MR-2X164RX-D and two
UCS-MR-2X324RX-C DIMM kits per CPU.
(A0, A1) - blue slots; (C0, C1) - white slots
(B0, B1) - yellow slots; (D0, D1) - black slots

Cisco UCS B440 M2 Blade Server
12
CONFIGURING the SERVER
(2) 4-CPU Configuration
■32 DIMMs capacity total
■Select two or four DIMM kits ( 4 or 8 DIMMs) per CPU. The DIMMs for each CPU will be placed
by the factory as shown in Tab l e 6..
Caveats
■The only supported DIMM configurations are shown in Ta b l e 5 on page 11 and Ta b l e 6. The
DIMMs are sold in matched pairs, which must be installed in pairs shown in the tables.
Switching out one of the DIMMs within the matched pair will lead to memory errors.
■The B440 M2 server needs at least two DIMM pairs installed for each CPU for optimal
performance
■DIMMs sold as kits are matched pairs and must remain together when installed in a particular
pair of same-colored (blue, white, yellow, or black) pairs of slots.
■The DIMMs installed in slots for an absent CPU are not recognized.
■Memory DIMMs should be installed evenly across the installed CPUs, though it is not a
requirement.
■Mixing DIMM speeds will cause the faster DIMMs to run at the speed of the slower DIMMs.
■Your selected CPU(s) can have some affect on performance. The CPUs must be of the same
type.
Table 6 4-CPU Configuration DIMM Placement
Number of DIMMs
per CPU
DIMM Placement in Numbered/Colored DIMM Slots
(see Figure 6 on page 28)
41
Notes . . .
1. Two UCS-MR-2X041RX-C, UCS-MR-2X082RX-C, UCS-MR-2X164RX-D, or UCS-MR-2X324RX-C DIMM kits per CPU
(A0, A1) - blue slots; (C0, C1) - white slots
82
2. Four UCS-MR-2X041RX-C, UCS-MR-2X082RX-C, UCS-MR-2X164RX-D, or UCS-MR-2X324RX-C DIMM kits per CPU, or
one of these combinations: (1) Two UCS-MR-2X082RX-C and two UCS-MR-2X164RX-D DIMM kits per CPU, or (2)
two UCS-MR-2X082RX-C and two UCS-MR-2X324RX-C DIMM kits per CPU, or (3) two UCS-MR-2X164RX-D and two
UCS-MR-2X324RX-C DIMM kits per CPU.
(A0, A1) - blue slots; (C0, C1) - white slots
(B0, B1) - yellow slots; (D0, D1) - black slots

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
13
STEP 4 CHOOSE HARD DISK DRIVES or SOLID-STATE DRIVES
The standard disk drive features are:
■Small form factor HDDs or SSDs
■Hot-pluggable
■Sled-mounted
Choose Drives
The available drives are listed in Ta b l e 7.
Approved Configurations
(1) Zero to Four Drives
■Select from 0 to 4 drives from Tabl e 7.
Caveats
■You can mix SAS/SATA drives, but not HDD/SSD drives. See STEP 5 CHOOSE RAID
CONFIGURATION, page 14 for available RAID configurations.
■You cannot mix HDDs and SSDs.
Table 7 Available Hot-Pluggable Sled-Mounted HDDs or SSDs
Product ID (PID) PID Description Drive
Type Capacity
HDDs
A03-D146GC2 146 GB 6 Gb SAS 15K RPM SFF HDD SAS 146 GB
A03-D300GA2 300 GB 6 Gb SAS 10K RPM SFF HDD SAS 300 GB
UCS-HDD300GI2F105 300 GB 6 Gb SAS 15K RPM SFF HDD SAS 300 GB
A03-D600GA2 600 GB 6 Gb SAS 10K RPM SFF HDD SAS 600 GB
UCS-HDD900GI2F106 900 GB 6 Gb SAS 10K RPM SFF HDD SAS 900 GB
SSDs
UCS-SD400G0KA2-G 400 GB SATA 2.5" Enterprise Value SSD SATA 400 GB
UCS-SD300G0KA2-E 300 GB SATA 2.5" Enterprise Performance SSD SATA 300 GB
UCS-SD200G0KA2-E 200 GB SATA 2.5" Enterprise Performance SSD SATA 200 GB
UCS-SD100G0KA2-G 100 GB SATA 2.5" Enterprise Value SSD SATA 100 GB

Cisco UCS B440 M2 Blade Server
14
CONFIGURING the SERVER
STEP 5 CHOOSE RAID CONFIGURATION
The B440 M2 server integrates the LSI SAS2108 6G SAS RAID controller.
Choose RAID Options
If desired, choose the RAID 5, 6 upgrade option and battery backup option listed in Ta b l e 8. The
BBU is an intelligent battery backup unit that protects disk write cache data during a power loss
on the RAID controller for up to 72 hours. We recommend that you replace the BBU once per
year or after 1,000 recharge cycles, whichever comes first.
Caveats
■No RAID option will be effective if you have a mix of SAS and SATA drives.
■No RAID option is possible if you have no drives.
■You must have at least one drive installed in order to add an optional battery backup unit.
Table 8 Available RAID Options
Product ID (PID) PID Description
RAID Battery Backup Option
N20-LBBU Battery backup unit for 1 GB write cache
RAID Configuration
N20-BRAID-K1 RAID upgrade supporting RAID 5 and 6

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
15
STEP 6 CHOOSE MEZZANINE OPTION CARD(S)
The standard PCIe card offerings are:
■Virtual Interface Card (VIC)
■Converged Network Adapters (CNA)
Choose a PCIe Option Card
The available PCIe option cards are listed in Ta b l e 9.
Approved Configurations
(1) Select at least one PCIe Mezzanine Card (mandatory)
You must select at least one card and may select up to two cards.
To help ensure that your operating system is compatible with the cards you have selected,
please check the Hardware Compatibility List at this URL:
http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
Table 9 Available PCIe Option Cards
Product ID (PID) PID Description
Virtual Interface Cards (VICs)
UCS-VIC-M82-8P Cisco UCS VIC 1280 dual 40Gb capable Virtual Interface Card
N20-AC00021
Notes . . .
1. The UCS M81KR VIC is no longer orderable.
UCS M81KR Virtual Interface Card/PCIe/2-port 10Gb
Converged Network Adapters (CNA)
UCSB-MEZ-QLG-032
2. This new M73KR-Q adapter is the nearest equivalent replacement for the obsolete M72KR-Q adapter.
Cisco UCS CNA M73KR-Q Qlogic Adapter
UCSB-MEZ-ELX-033
3. This new M73KR-E adapter is the nearest equivalent replacement for the obsolete M72KR-E adapter.
Cisco UCS CNA M73KR-E Emulex Adapter
NOTE: The server must be running UCS Manager v1.3 (N10-MGT005) or later to
support two adapter cards.

Cisco UCS B440 M2 Blade Server
16
CONFIGURING the SERVER
(2) Supported Combinations
Table 10 Supported Adapter Combinations Options
Fabric Extender
Compatibility Adapter Slot 1 Adapter Slot 2 Ports Reference
2208XP (PIDs UCS-IOM-2208XP, UCS-IOM2208-16FET) or
2204XP (PIDs UCS-IOM-2204XP, UCS-IOM2204-8FET)
2208XP/2204XP None Emulex or QLogic adapter 2 x 10 Gb Figure 8 on page 31
2208XP/2204XP Emulex or QLogic adapter None 2 x 10 Gb Figure 9 on page 32
2208XP/2204XP Emulex Adapter or
QLogic adapter1
Notes . . .
1. Do not mix Emulex and QLogic adapters
Emulex Adapter or
QLogic adapter1
4 x 10 Gb Figure 10 on page 32
2208XP/2204XP VIC 1280 None 4 x 10 Gb Figure 11 on page 33
2208XP/2204XP None VIC 1280 4 x 10 Gb Figure 12 on page 33
2208XP/2204XP VIC 1280 VIC 1280 4 x 10 Gb Figure 13 on page 34
2208XP/2204XP VIC 1280 Emulex or QLogic adapter 4 x 10 Gb Figure 14 on page 34
2208XP/2204XP Emulex or QLogic adapter VIC 1280 4 x 10 Gb Figure 15 on page 35
2104XP (PID N20-I6584)
2104 XP None Emulex or QLogic adapter 2 x 10 Gb Figure 16 on page 36
2104 XP Emulex or QLogic adapter None 2 x 10 Gb Figure 17 on page 36
2104 XP Emulex Adapter or
QLogic adapter2
2. Do not mix Emulex and QLogic adapters
Emulex Adapter or
QLogic adapter2
2 x 10 Gb Figure 18 on page 37
2104 XP VIC 1280 None 2 x 10 Gb Figure 19 on page 37
2104 XP None VIC 1280 2 x 10 Gb Figure 20 on page 38
2104 XP VIC 1280 VIC 1280 2 x 10 Gb Figure 21 on page 38
2104 XP VIC 1280 Emulex or QLogic adapter 2 x 10 Gb Figure 22 on page 39
2104 XP Emulex or QLogic adapter VIC 1280 2 x 10 Gb Figure 23 on page 39

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
17
STEP 7 CHOOSE OPERATING SYSTEM AND VALUE-ADDED SOFTWARE
Several operating systems and value-added software programs are available. Select as desired
from Ta b l e 11.
Table 11 OSs and Value-Added Software (for 4-CPU servers)
PID Description Product ID (PID)
Microsoft Windows Server
MSWS-08R2-STHV Windows Svr 2008 ST media R2 ST (1-4CPU, 5CAL)
MSWS-08R2-ENHV Windows Svr 2008 EN media R2 EN (1-8CPU, 25CAL)
MSWS-08R2-DCHV2S Windows Svr 2008 R2-2 CPU-Data Center
MSWS-08R2-DCHV4 Windows Svr 2008 R2-4 CPU-Data Center
MSWS-12-ST2S Windows Server 2012 Standard (2 CPU/2 VMs)
MSWS-12-DC2S Windows Server 2012 Datacenter (2 CPU/Unlimited VMs)
MSWS-12-ST2S-NS Windows Server 2012 Standard (2 CPU/2 VMs) No Cisco Svc
MSWS-12-DC2S-NS Windows Server 2012 Datacenter (2 CPU/Unlim VM) No Cisco Svc
SUSE
SLES-SVR-2S-1G-1A SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);1yr Support Reqd
SLES-SVR-2S-1G-3A SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);3yr Support Reqd
SLES-SVR-2S-1G-5A SUSE Linux Enterprise Srvr (1-2 CPU,1 Phys);5yr Support Reqd
SLES-SVR-2S-UG-1A SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);1yr Support Reqd
SLES-SVR-2S-UG-3A SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);3yr Support Reqd
SLES-SVR-2S-UG-5A SUSE Linux Enterprise Svr (1-2 CPU,Unl Vrt);5yr Support Reqd
SLES-SVR-4S-1G-1A SUSE Linux Enterprise Srvr (4 CPU,1 Phys); 1yr Support Reqd
SLES-SVR-4S-1G-3A SUSE Linux Enterprise Srvr (4 CPU,1 Phys); 3yr Support Reqd
SLES-SVR-4S-1G-5A SUSE Linux Enterprise Srvr (4 CPU,1 Phys); 5yr Support Reqd
SLES-SVR-4S-UG-1A SUSE Linux Enterprise Srvr (4 CPU,Unl Vrt); 1yr Support Reqd
SLES-SVR-4S-UG-3A SUSE Linux Enterprise Srvr (4 CPU,Unl Vrt); 3yr Support Reqd
SLES-SVR-4S-UG-5A SUSE Linux Enterprise Srvr (4 CPU,Unl Vrt); 5yr Support Reqd
SLES-SAP-2S-1G-1A SLES for SAP Applications (1-2 CPU,1 Phys); 1yr Support Reqd
SLES-SAP-2S-1G-3A SLES for SAP Applications (1-2 CPU,1 Phys); 3yr Support Reqd
SLES-SAP-2S-1G-5A SLES for SAP Applications (1-2 CPU,1 Phys); 5yr Support Reqd
SLES-SAP-2S-UG-1A SLES for SAP Applications (1-2 CPU,Unl Vrt);1yr Support Reqd
SLES-SAP-2S-UG-3A SLES for SAP Applications (1-2 CPU,Unl Vrt);3yr Support Reqd
SLES-SAP-2S-UG-5A SLES for SAP Applications (1-2 CPU,Unl Vrt);5yr Support Reqd
SLES-SAP-4S-1G-1A SLES for SAP Applications (4 CPU,1 Phys); 1yr Support Reqd
SLES-SAP-4S-1G-3A SLES for SAP Applications (4 CPU,1 Phys); 3yr Support Reqd
SLES-SAP-4S-1G-5A SLES for SAP Applications (4 CPU,1 Phys); 5yr Support Reqd
SLES-SAP-4S-UG-1A SLES for SAP Applications (4 CPU,Unl Vrt); 1yr Support Reqd

Cisco UCS B440 M2 Blade Server
18
CONFIGURING the SERVER
SLES-SAP-4S-UG-3A SLES for SAP Applications (4 CPU,Unl Vrt); 3yr Support Reqd
SLES-SAP-4S-UG-5A SLES for SAP Applications (4 CPU,Unl Vrt); 5yr Support Reqd
Red Hat Enterprise Linux
RHEL-2S-1G-1A RHEL/2 Socket/1 Guest/1Yr Svcs Required
RHEL-2S-1G-3A RHEL/2 Socket/1 Guest/3Yr Svcs Required
RHEL-2S-4G-1A RHEL/2 Socket/4 Guest/1Yr Svcs Required
RHEL-2S-4G-3A RHEL/2 Socket/4 Guest/3Yr Svcs Required
RHEL-2S-UG-1A RHEL/2 Socket/U Guest/1Yr Svcs Required
RHEL-2S-UG-3A RHEL/2 Socket/U Guest/3Yr Svcs Required
RHEL-4S-1G-1A RHEL/4 Socket/1 Guest/1Yr Svcs Required
RHEL-4S-1G-3A RHEL/4 Socket/1 Guest/3Yr Svcs Required
RHEL-4S-4G-1A RHEL/4 Socket/4 Guest/1Yr Svcs Required
RHEL-4S-4G-3A RHEL/4 Socket/4 Guest/3Yr Svcs Required
RHEL-4S-UG-1A RHEL/4 Socket/U Guest/1Yr Svcs Required
RHEL-4S-UG-3A RHEL/4 Socket/U Guest/3Yr Svcs Required
RHEL-HA-2S-1A RHEL Option/High-Availability/2 Socket/1Yr Svcs Required
RHEL-HA-2S-3A RHEL Option/High-Availability/2 Socket/3Yr Svcs Required
RHEL-HA-4S-1A RHEL Option/High-Availability/4 Socket/1Yr Svcs Required
RHEL-HA-4S-3A RHEL Option/High-Availability/4 Socket/3Yr Svcs Required
RHEL-RS-2S-1A RHEL Option/Resilient Storage w/HA /2 Socket/1 Yr Svcs Reqd
RHEL-RS-2S-3A RHEL Option/Resilient Storage w/HA /2 Socket/3 Yr Svcs Reqd
RHEL-RS-4S-1A RHEL Option/Resilient Storage w/HA /4 Socket/1 Yr Svcs Reqd
RHEL-RS-4S-3A RHEL Option/Resilient Storage w/HA /4 Socket/3 Yr Svcs Reqd
RHEL-SFS-2S-1A RHEL Option/Scalable File System/2 Socket/1 Yr Svcs Required
RHEL-SFS-2S-3A RHEL Option/Scalable File System/2 Socket/1 Yr Svcs Required
RHEL-SFS-4S-1A RHEL Option/Scalable File System/4 Socket/1 Yr Svcs Required
RHEL-SFS-4S-3A RHEL Option/Scalable File System/4 Socket/3 Yr Svcs Required
BMC
BMC-012 BMC BPPM Per Server
BMC-SE-4C BMC BladeLogic Standard Edition, 4 Cores, Support Required
BMC-SE-6C BMC BladeLogic Standard Edition, 6 Cores, Support Required
BMC-SE-8C BMC BladeLogic Standard Edition, 8 Cores, Support Required
BMC-SE-10C BMC BladeLogic Standard Edition, 10 Cores, Support Required
BMC-AE-4C BMC BladeLogic Advanced Edition, 4 Cores, Support Required
BMC-AE-6C BMC BladeLogic Advanced Edition, 6 Cores, Support Required
BMC-AE-8C BMC BladeLogic Advanced Edition, 8 Cores, Support Required
BMC-AE-10C BMC BladeLogic Standard Edition, 10 Cores, Support Required
Table 11 OSs and Value-Added Software (for 4-CPU servers) (continued)
PID Description Product ID (PID)

Cisco UCS B440 M2 Blade Server
CONFIGURING the SERVER
19
Nexus 1000V for Hyper-V and vSphere
N1K-VSG-UCS-BUN Over half off N1K and VSG w/ purchase of UCS B/C Series
N1K-VLEM-UCS-1 Nexus 1000V License Paper Delivery (1 CPU) for bundles
VSG-VLEM-UCS-1 VSG License Paper Delivery (1 CPU) for bundles
UCS Director
CUIC-PHY-SERV-BM-U Cisco Cloupia Resource Lic - One Phy Server node bare metal
CUIC-PHY-SERV-U Cisco Cloupia Resource Lic - One physical Server node
CUIC-TERM Acceptance of Cisco Cloupia License Terms
VMWare 5
VMW-VS5-STD-1A VMware vSphere 5 Standard for 1 Processor, 1 Year, Support Rqd
VMW-VS5-STD-2A VMware vSphere 5 Standard for 1 Processor, 2 Year, Support Rqd
VMW-VS5-STD-3A VMware vSphere 5 Standard for 1 Processor, 3 Year, Support Rqd
VMW-VS5-STD-4A VMware vSphere 5 Standard for 1 Processor, 4 Year, Support Rqd
VMW-VS5-STD-5A VMware vSphere 5 Standard for 1 Processor, 5 Year, Support Rqd
VMW-VS5-ENT-1A VMware vSphere 5 Enterprise for 1 Processor, 1 Year Support Rqd
VMW-VS5-ENT-2A VMware vSphere 5 Enterprise for 1 CPU, 2 Yr Support Rqd
VMW-VS5-ENT-3A VMware vSphere 5 Enterprise for 1 CPU, 3 Yr Support Rqd
VMW-VS5-ENT-4A VMware vSphere 5 Enterprise for 1 Processor, 4 Year Support Rqd
VMW-VS5-ENT-5A VMware vSphere 5 Enterprise for 1 CPU, 5 Yr Support Rqd
VMW-VS5-ENTP-1A VMware vSphere 5 Enterprise Plus for 1 Processor, 1 Year Support Rqd
VMW-VS5-ENTP-2A VMware vSphere 5 Enterprise Plus for 1 CPU, 2 Yr Support Rqd
VMW-VS5-ENTP-3A VMware vSphere 5 Enterprise Plus for 1 Processor, 3 Year Support Rqd
VMW-VS5-ENTP-4A VMware vSphere 5 Enterprise Plus for 1 Processor, 4 Year Support Rqd
VMW-VS5-ENTP-5A VMware vSphere 5 Enterprise Plus for 1 Processor, 5 Year Support Rqd
VMW-VC5-STD-1A VMware vCenter 5 Server Standard, 1 yr support required
VMW-VC5-STD-2A VMware vCenter 5 Server Standard, 2 yr support required
VMW-VC5-STD-3A VMware vCenter 5 Server Standard, 3 yr support required
VMW-VC5-STD-4A VMware vCenter 5 Server Standard, 4 yr support required
VMW-VC5-STD-5A VMware vCenter 5 Server Standard, 5 yr support required
Table 11 OSs and Value-Added Software (for 4-CPU servers) (continued)
PID Description Product ID (PID)

Cisco UCS B440 M2 Blade Server
20
CONFIGURING the SERVER
STEP 8 CHOOSE OPERATING SYSTEM MEDIA KIT
Choose the optional operating system media listed in Tabl e 12.
Tab l e 12 OS Med ia
Product ID (PID) PID Description
RHEL-6 RHEL 6 Recovery Media Only (Multilingual)
SLES-11 SLES 11 media only (multilingual)
MSWS-08R2-STHV-RM Windows Svr 2008 R2 ST (1-4CPU, 5CAL), Media
MSWS-08RS-ENHV-RM Windows Svr 2008 R2 EN (1-8CPU, 25CAL), Media
MSWS-08R2-DCHV-RM Windows Svr 2008 R2 DC (1-8CPU, 25CAL), Media
MSWS-12-ST2S-RM Windows Server 2012 Standard (2 CPU/2 VMs) Recovery Media
MSWS-12-DC2S-RM Windows Server 2012 Datacenter (2 CPU/Unlimited VM) Rec Media