Cisco UCS C460 User manual

CHAPTER
1-1
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
1
Overview
This chapter provides an overview of the Cisco UCS C460 server features.
The Cisco UCS C460 server is a part of the Cisco UCS C-Series rack-mount server family. It is a
high-performance, high-memory-capacity server designed with the performance and reliability to power
compute-intensive, enterprise-critical standalone applications and virtualized workloads.It operates in a
wide range of data center environments. These environments include the Cisco Unified Computing
System, the Cisco Nexus switches, and discrete Ethernet and Fibre Channel switches from Cisco and
third parties.
Figure 1-1 shows the front panel features.
Figure 1-1 Front Panel Features
1HDDs, up to twelve 2DVD drive
3Fans, up to eight 4Power supply status LED
5Memory status LED 6CPU status LED
7Network activity LED 8Operations panel (see Figure 1-2 for a
detailed view)
9VGA connector 10 USB ports, three
3
1
198383
28 9 104 5 6 7

1-2
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 1 Overview
Figure 1-2 shows the operations panel LEDs and buttons.
Figure 1-2 Operations Panel LEDs and Buttons
Figure 1-3 shows the rear panel features.
Figure 1-3 Rear Panel Features
1ID LED 2ID button
3HDD fault LED 4System health LED
5Fan fault LED 6Power status LED
7Power button 8Reset button
9NMI button
12 7
8
9
35
197617
4 6
1Power supplies, up to four 2ID button
3USB ports, two total 4VGA connector
510GBase-T LOM ports, two total 6SAS riser slot
710G SFP+ LOM ports, two total 81G LOM ports, two total
910/100 Management ports M1 and M2 10 Serial connector
11 PCIe slots 1 through 10 (left to right as
shown)
12 Power supply LEDs
12
11
1
2
3
4
810
9
5
7
6
198384

1-3
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 1 Overview
Table 1-1 lists the features of the C460 server.
.
Table 1-1 Cisco UCS C460 Server Features
Chassis Four rack-unit (4RU) chassis
Processors •Cisco UCS C460 M1 server: Either 2 or 4 Intel Xeon 7500 Series processors.
•Cisco UCS C460 M2 server: Either 2 or 4 Intel E7-4800 or E7-8800 Series
processors.
Two-CPU configurations require 2 power supplies and 4-CPU configurations
require 4 power supplies.
Memory Up to 64 DIMMs1, populated in 8 slots on each of the 8 memory risers.
Up to 512 GB of industry-standard DDR32memory.
Multi-bit error
protection
This server supports multi-bit error protection.
Storage Up to twelve, 2.5” SAS3or SATA4hard drives or solid state drives.
Up to 6 TB of hot-pluggable storage.
Disk
Management
Factory-configured RAID5support options:
•RAID 0, 1, and 10 support for up to 8 SAS or SATA drives, with the optional
LSI MegaRAID SAS 9240-8i RAID controller
•RAID 0, 1, 5, 6, 10, 50, and 60 support for up to 12 SAS or SATA drives, with
the optional LSI MegaRAID SAS 9260-8i RAID controller
There is a dedicated SAS riser slot for the RAID controller card in the chassis. There
is also a mounting point inside the chassis for the optional RAID battery backup unit
that is available when using the LSI MegaRAID SAS 9260-8i controller.
See RAID Controller Considerations, page C-1 for more information.
PCIe I/O Ten PCIe6expansion slots, four hot-pluggable.
See Replacing a PCIe Card, page 3-37 for details.
InfiniBand The bus slots in this server support the InfiniBand architecture.

1-4
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 1 Overview
Network and
management I/O
The server provides these rear-panel connectors:
•Two dedicated 10/100 Ethernet management ports
•Two 1Gb Ethernet ports
These integrated Gigabit ports support the Wake on LAN (WoL) and TCP/IP
Offload Engine (TOE) standards.
•Two 10Gb Base-T Ethernet ports
•Two 10Gb SFP+ Ethernet ports
Note See Using the 10 Gb Ports, page 2-12 for more information about the SFP+
and 10GBase-T 10 Gb ports.
•One DB9 serial connector.
•One 15-pin VGA7connector.
•Two USB82.0 connectors.
The server provides these front-panel connectors:
•One 15-pin VGA connector.
•Three USB 2.0 connectors.
WoL The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) standard.
Power Either 2 or 4 power supplies, 850W each.
Hot-swappable, rear-accessible, and redundant as 2+2 or 3+1.
Note You can use 2 power supplies with a 2-CPU configuration. In this case, 1+1
redundancy is supported only if your server’s overall power consumption
can be supported by a single 850W power supply during the failure and
hot-swap. For more information about your server’s power consumption,
consult with your Cisco sales representative or use the power calculator
accessible at the Unified Computing System Partner Resource Center:
http://www.ciscoprc.com/resourcelib.asp?id=937
ACPI This server supports the advanced configuration and power interface (ACPI) 4.0
standard.
Cooling Up to 8 fans, hot-swappable, redundant as 7+1, or non-redundant as 4.
Also, there are 4 fans in each power supply for lower-section cooling.
Removable media One DVD drive.
The drive supports the following media types: CD-R, CD-ROM, CD-RW, DVD+R,
DVD+RW, DVD-R, DVD-ROM, DVD-RW, +R DL
1. DIMM = dual inline memory module
2. DDR = double data rate (transfer mode)
3. SAS = serial attached SCSI
4. SATA = serial advanced technology attachment
5. RAID = redundant array of independent disks
6. PCIe = peripheral component interconnect express
7. VGA = video graphics array
8. USB = universal serial bus
Table 1-1 Cisco UCS C460 Server Features (continued)