Cisco C9200L-48P-4G User manual

Cisco Catalyst 9200 Series Switches Hardware Installation Guide
First Published: 2018-11-19
Last Modified: 2019-02-06
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]

©2018–2019 Cisco Systems, Inc. All rights reserved.

CONTENTS
Product Overview 1
CHAPTER 1
Switch Models 1
Front Panel Components 2
10/100/1000 Ports 3
PoE and PoE+ Ports 4
Management Ports 4
USB Type A Port 5
Uplink Ports 5
Rear Panel 6
RFID Tag 8
StackWise Ports 8
Power Supply Modules 8
Fan Modules 9
Ethernet Management Port 10
RJ-45 Console Port 10
Network Configurations 11
Installing the Switch 13
CHAPTER 2
Preparing for Installation 13
Safety Warnings 13
Installation Guidelines 15
Shipping Box Contents 15
Tools and Equipment 16
Verifying Switch Operation 17
Planning a Switch Data Stack 17
Switch Stacking Guidelines 17
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iii

Data Stack Cabling Configurations 17
Data Stack Bandwidth and Partitioning Examples 18
Power-On Sequence for Switch Stacks 20
Installing the Switch 21
Rack-Mounting 21
Attaching the Rack-Mount Brackets 22
Mounting the Switch a Rack 24
Installing the Switch on a Table or Shelf 24
After Switch Installation 25
Connecting to the StackWise Ports 25
Connecting Devices to the Ethernet Ports 27
10/100/1000 Port Connections 27
Auto-MDIX Connections 27
Auto-MDIX Connections 27
PoE and POE+ Port Connections 28
Installing a Network Module 31
CHAPTER 3
Installing a Network Module in the Switch 31
Safety Warnings 31
Equipment That You Need 31
Installing a Network Module 32
Removing a Network Module 34
Finding the Network Module Serial Number 34
Installing and Removing SFP Modules 35
Installing SFP/SFP+ Modules 35
Removing SFP/SFP+ Modules 37
Installing a Power Supply Unit 39
CHAPTER 4
Power Supply Modules Overview 39
Finding the Power Supply Module Serial Number 41
Installation Guidelines 42
Installing or Replacing an AC Power Supply Module 43
Installing a Fan Module 47
CHAPTER 5
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
iv
Contents

Fan Modules Overview 47
Installation Guidelines 48
Installing a Fan Module 48
Finding the Fan Module Serial Number 49
Configuring the Switch 51
CHAPTER 6
Configuring the Switch Using the Web User Interface 51
Setting up the Switch 51
Connecting to the Switch 51
Creating User Accounts 52
Choosing Setup Options 53
Configuring Basic Device Settings 53
Configuring Your Device Based on a Site Profile 54
Configuring Switch Wide Settings 59
Configuring VLAN Settings 59
Configure STP Settings 60
Configuring DHCP, NTP, DNS and SNMP Settings 60
Configuring Port Settings 61
Configuring the Switch Using the CLI 62
Accessing the CLI Through the Console Port 62
Connecting the RJ-45 Console Port 63
Connecting the USB Console Port 63
Installing the Cisco Microsoft Windows USB Device Driver 64
Installing the Cisco Microsoft Windows XP USB Driver 64
Installing the Cisco Microsoft Windows 2000 USB Driver 65
Installing the Cisco Microsoft Windows Vista and Windows 7 USB Driver 65
Uninstalling the Cisco Microsoft Windows USB Driver 65
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 65
Uninstalling the Cisco Microsoft Windows Vista and Windows 7 USB Driver 66
Technical Specifications 69
APPENDIX A
Environmental and Physical Specifications 69
Specifications for the Power Supplies and Fans 72
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
v
Contents

Switch LEDs 75
APPENDIX B
LEDs 75
Console LED 75
System LED 76
MASTER LED 76
STACK LED 77
PoE LED 78
Port LEDs and Modes 78
Beacon LED 80
RJ-45 Console Port LED 81
Fan LED 81
Uplink Port LEDs 81
Introduction ?
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
vi
Contents

CHAPTER 1
Product Overview
•Switch Models, on page 1
•Front Panel Components, on page 2
•Rear Panel, on page 6
•Network Configurations, on page 11
Switch Models
The Cisco Catalyst 9200 Series switches have four modular (C9200) and eight fixed (C9200L) switch models.
The following tables describe all the available Cisco Catalyst 9200 Series switches and the features supported.
Table 1: C9200L Switch Models and Descriptions
DescriptionSwitch Model
Stackable 24x1G PoE+ ports; 4x1G fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-24P-4G
Stackable 24x1G PoE+ ports; 4x10G fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-24P-4X
Stackable 24x1G ports; 4x1G fixed uplink ports; 2 power supply
slots; 2 fixed fans; supports StackWise-80.
C9200L-24T-4G
Stackable 24x1G ports; 4x10G fixed uplink ports; 2 power supply
slots; 2 fixed fans; supports StackWise-80.
C9200L-24T-4X
Stackable 48x1G PoE+ ports; 4x1G fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48P-4G
Stackable 48x1G PoE+ ports; 4x10G fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48P-4X
Stackable 48x1G ports; 4x1G fixed uplink ports; 2 power supply
slots; 2 fixed fans; supports StackWise-80.
C9200L-48T-4G
Stackable 48x1G PoE+ ports; 4x10G fixed uplink ports; 2 power
supply slots; 2 fixed fans; supports StackWise-80.
C9200L-48T-4X
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
1

Table 2: C9200 Switch Models and Descriptions
DescriptionSwitch Model
Stackable 24x1G PoE+ ports; 4x1G and 4x10G fixed uplink ports;
2 power supply slots; 2 field-replaceable fans; supports
StackWise-160.
C9200-24P
Stackable 24x1G ports; 4x1G and 4x10G fixed uplink ports; 2 power
supply slots; 2 field-replaceable fans; supports StackWise-160.
C9200-24T
Stackable 48x1G PoE+ ports; 4x1G and 4x10G fixed uplink ports;
2 power supply slots; 2 field-replaceable fans; supports
StackWise-160.
C9200-48P
Stackable 48x1G ports; 4x1G and 4x10G fixed uplink ports; 2 power
supply slots; 2 field-replaceable fans; supports StackWise-160.
C9200-48T
Front Panel Components
This section describes the front panel components of Cisco Catalyst 9200 Series switches :
• 24 or 48 downlink ports of one of the following types:
• 10/100/1000
• 10/100/1000 PoE+
• 1G/10G Uplink ports
• USB Type A storage ports
• USB mini-Type B console port
• LEDs
• Blue Beacon
All the switch models have similar components. See the following illustration for example.
The Cisco Catalyst 9200 Series switches might have slight cosmetic differences on the bezels.
Note
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
2
Product Overview
Front Panel Components

Figure 1: Front Panel of a C9200L Switch
USB Type A storage ports5Blue Beacon (UID button)1
10/100/1000 PoE+ ports6Mode button2
Fixed uplink ports7Status LEDs3
USB mini-Type B (console) port4
Figure 2: Front Panel of a C9200 Switch
USB Type A storage ports4Blue Beacon (UID button)1
10/100/1000 PoE+ ports5Mode button2
Network Module with uplink
ports
6USB mini-Type B (console)
port
3
10/100/1000 Ports
The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet
(100 meters). The 100BASE-TX and 1000BASE-T traffic requires twisted pair (UTP) cable of Category 5
or higher. The 10BASE-T traffic can use Category 3 cable or higher.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
3
Product Overview
10/100/1000 Ports

PoE and PoE+ Ports
The PoE and PoE+ ports provide the following functionality:
• PoE/PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4W PoE per port) and
support for IEEE 802.3at-compliant powered devices (up to 30W PoE+ per port).
• Support for pre-standard Cisco powered devices.
• Configurable support for Cisco intelligent power management, including enhanced power negotiation,
power reservation, and per-port power policing.
See the Power Supply Modules, on page 8 for the power supply matrix that defines the available PoE and
PoE+ power per port. The output of the PoE+ circuit has been evaluated as a Limited Power Source (LPS)
per IEC 60950-1.
Management Ports
The management ports connect the switch to a PC running Microsoft Windows or to a terminal server.
• Ethernet management port. See Ethernet Management Port, on page 10.
• RJ-45 console port (EIA/TIA-232). See RJ-45 Console Port, on page 10.
• USB mini-Type B console port (5-pin connector).
The 10/100/1000 Ethernet management port connection uses a standard RJ-45 crossover or straight-through
cable. The RJ-45 console port connection uses the supplied RJ-45-to-DB-9 female cable. The USB console
port connection uses a USB Type A to 5-pin mini-Type B cable. The USB console interface speeds are the
same as the RJ-45 console interface speeds.
If you use the USB mini-Type B console port, the Cisco Windows USB device driver must be installed on
any PC connected to the console port (for operation with Microsoft Windows). Mac OS X or Linux do not
require special drivers.
The 4-pin mini-Type B connector resembles the 5-pin mini-Type B connectors. They are not compatible. Use
only the 5-pin mini-Type B.
Figure 3: USB Mini-Type B Port
This illustration shows a 5-pin mini-Type B USB port.
With the Cisco Windows USB device driver, you can connect and disconnect the USB cable from the console
port without affecting Windows HyperTerminal operations.
The console output always goes to both the RJ-45 and the USB console connectors, but the console input is
active on only one of the console connectors at any one time. The USB console takes precedence over the
RJ-45 console. When a cable is connected into the USB console port, the RJ-45 console port becomes inactive.
Conversely, when the USB cable is disconnected from the USB console port, the RJ-45 port becomes active.
You can use the command-line interface (CLI) to configure an inactivity timeout which reactivates the RJ-45
console if the USB console has been activated and no input activity has occurred on the USB console for a
specified time.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
4
Product Overview
PoE and PoE+ Ports