Cisco Linksys SGE2010P Quick start guide

Switch Firmware Upgrade via TFTP
Document ID: 108853
Questions
Introduction
How do I upgrade the firmware of the switch via TFTP?
Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business
products (formerly Linksys Business Series).
Note: The firmware version, type, and user interface used in this example might be different than the
firmware version, type, and user interface for these switches: SRW208, SRW208G, SRW208L, SRW208P
and SRW208MP, SRW2008, SRW2008P and SRW2008MP, SRW2024, SRW2048, SRW2016, SRW224G4,
SRW248G4, SFE1000P, SFE2000, SFE200P, SFE2010, SFE2010P, SGE2000, SGE2000P, SGE2010, and
SGE2010P.
Refer to Cisco Technical Tips Conventions for information on document conventions.
Q. How do I upgrade the firmware of the switch via TFTP?
A. Complete these steps in order to upgrade the switch firmware via TFTP:
Check the model and version number at the back of the switch.
Note: If there is no hardware version displayed beside the model number, the device
is considered version 1.
1.
Go to Cisco Software Center ( registered customers only) . Cisco recommends that you
perform all firmware upgrades on your local network, not remotely.
Note: You need a registered account to login. If you do not already have one, please
register at Cisco.com.
Device Name Firmware
Version URL File Name URL
SRW208 ls_srw208_8fe−104.ros
2.

Cisco Support
Center:
SRW208,
SRW208G,
SWR208MP,
SWR208P.
SRW208G
Cisco Support
Center:
SRW208,
SRW208G,
SWR208MP,
SWR208P. ls_srw208_8fe−104.ros
SRW208L
Cisco Support
Center:
SRW208,
SRW208G,
SWR208MP,
SWR208P. ls_srw208_8fe−104.ros
SRW208MB
Cisco Support
Center:
SRW208,
SRW208G,
SWR208MP,
SWR208P. ls_srw208_8fe−104.ros
SRW208P
Cisco Support
Center:
SRW208,
SRW208G,
SWR208MP,
SWR208P. ls_srw208_8fe−104.ros
SRW2008
Cisco Support
Center:
SRW2008,
SRW2008MB,
SRW2008P. ls_srw2008−104.ros
SRW2008MB
Cisco Support
Center:
SRW2008,
SRW2008MB,
SRW2008P. ls_srw2008−104.ros
SRW2008P
Cisco Support
Center:
SRW2008,
SRW2008MB,
SRW2008P. ls_srw2008−104.ros
SRW2024 Cisco Support Center:
SRW1024,
SRW2016. ls20xx−12230.ros

SRW2016 Cisco Support Center:
SRW1024,
SRW2016. ls20xx−12230.ros
SRW224G4 Cisco Support Center:
SRW224G4,
SRW248G4 ls_106−12216.ros
SRW248G4 Cisco Support Center:
SRW224G4,
SRW248G4 ls_106−12216.ros
SRW2048 Cisco Support
Center:
SRW2048 gesm−12211.ros
SFE1000P Cisco Support
Center:
SFE1000P. linksys1_sfe1000p−10020.ros
SFE2000 Cisco Support Center:
SFE2000,
SFE200P. linksys1_bp_fe_bx−1011.ros
SFE200P Cisco Support Center:
SFE2000,
SFE200P. linksys1_bp_fe_bx−1011.ros
SFE2010 Cisco Support Center:
SFE2010,
SFE2010P. SFE2010_ros_ls1_bp_fe_bx−20180.ros
SFE2010P Cisco Support Center:
SFE2010,
SFE2010P. SFE2010_ros_ls1_bp_fe_bx−20180.ros
SGE2000 Cisco Support Center:
SGE2000,
SGE2000P. linksys1_bp_ge_bx−10045.ros
SGE2000P Cisco Support Center:
SGE2000,
SGE2000P. linksys1_bp_ge_bx−10045.ros
SGE2010 Cisco Support Center:
SGE2010,
SGE2010P. SGE2010_ros_ls1_bp_ge_bx−20175.ros
SGE2010P Cisco Support
Center: SGE2010_ros_ls1_bp_ge_bx−20175.ros

SGE2010,
SGE2010P.
Download and install a TFTP server (for example, SolarWinds) on your computer.3.
Save the boot image file (with the extention .ros) that you downloaded to the
TFTP−Root directory.
4.
Access the switch web UI, and go to Firmware Upgrade.5.
Click the via TFTP radio button, and then click the Upgrade radio button.6. Choose Software Image from the File Type drop−down list.7. In the TFTP Server field, enter the IP address of the computer on which the TFTP
server is installed.
8.

In the Source File field, enter the name of the firmware file.9.
Related Information
Cisco Small Business Managed Switches (Linksys Business Series)• Technical Support & Documentation − Cisco Systems•
Contacts & Feedback | Help | Site Map
© 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of
Cisco Systems, Inc.
Updated: Apr 06, 2009 Document ID: 108853