Cisco Meraki MS225 Series Parts list manual

Cisco Meraki MS225 Series Setup Guide

Models
Model number Description
MS225-24-HW Layer-3 24-port Gigabit Ethernet switch with 4 SFP interfaces
MS225-24P-HW Layer-3 24-port Gigabit Ethernet 370W PoE switch with 4 SFP interfaces
MS225-48-HW Layer-3 48-port Gigabit Ethernet switch with 4 SFP interfaces
MS225-48LP-HW Layer-3 48-port Gigabit Ethernet 370W PoE switch with 4 SFP interfaces
MS225-48FP-HW Layer-3 48-port Gigabit Ethernet 740W PoE switch with 4 SFP interfaces
Ratings
Model Power Altitude Temperature
MS225-24-HW 100-240V~, 1.5A-0.85A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-24P-HW 100-240V~, 8-4A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48-HW 100-240V~, 1.5A-0.85A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48LP-HW 100-240V~, 8-4A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48FP-HW 100-240V~, 12-6A, 50-60Hz 2000m 45℃
℃℃
℃

Package contents
In addition to MS switch, the following mounting kit is provided with 1Umodels only:
MS225-24-HW Front Panel
MS225-24P-HW Front Panel
MS225-48-HW Front Panel
MS225-48LP-HW Front Panel
MS225-48FP-HW Front Panel

There is a Restore button available on the front panel. Insert a paper clip if a restore is required:
- To delete a downloaded configuration and reboot: brief, momentary press.
- To force the unit into a full factory restore: press and hold for more than 10 seconds.
MS225-24-HW Back Panel
MS225-24P-HW Back Panel
MS225-48-HW Back Panel
MS225-48LP-HW Back Panel
MS225-48FP-HW Back Panel

