Cisco MGX 8850 Installation manual

Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]
Cisco MGX 8850 Routing Switch
Command Reference
Release 2.0
October 2001
Customer Order Number: DOC-10467=
Text Part Number: 78-10467-04 Rev C0

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE
PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR
APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO
LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of
UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDINGANYOTHERWARRANTYHEREIN, ALL DOCUMENT FILESAND SOFTWARE OF THESE SUPPLIERSARE PROVIDED
“AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR
INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
AAccessPath, AtmDirector, Browse with Me, CCIP, CCSI, CD-PAC, CiscoLink, the Cisco Powered Network logo, Cisco Systems Networking Academy,
the Cisco Systems Networking Academy logo, Fast Step, Follow Me Browsing, FormShare, FrameShare, GigaStack, IGX, Internet Quotient, IP/VC, iQ
Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, MGX, the Networkers logo, Packet, RateMUX, ScriptBuilder,
ScriptShare, SlideCast, SMARTnet, TransPath, Unity, Voice LAN, Wavelength Router, and WebViewer are trademarks of Cisco Systems, Inc.; Changing
the Way We Work, Live, Play, and Learn, Discover All That’s Possible, and Empowering the Internet Generation, are service marks of Cisco Systems,
Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS,the Cisco
IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub,
FastSwitch, IOS, IP/TV, LightStream, MICA, Network Registrar, PIX, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, SwitchProbe,
TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (0108R)
Cisco MGX 8850 Routing Switch Command Reference, Release 2.0
Copyright © 2001, Cisco Systems, Inc.
All rights reserved.

Cisco Reader Comment Card
General Information
1Years of networking experience: Years of experience with Cisco products:
2I have these network types: LAN Backbone WAN
Other:
3I have these Cisco products: Switches Routers
Other (specify models):
4I perform these types of tasks: H/W installation and/or maintenance S/W configuration
Network management Other:
5I use these types of documentation: H/W installation H/W configuration S/W configuration
Command reference Quick reference Release notes Online help
Other:
6I access this information through: Cisco.com (CCO) CD-ROM
Printed docs Other:
7I prefer this access method:
8I use the following three product features the most:
Document Information
Document Title: Cisco MGX 8850 Routing Switch Command Reference
Part Number: DOC-7810467= S/W Release (if applicable): Release 2.0
On a scale of 1–5 (5 being the best), please let us know how we rate in the following areas:
Please comment on our lowest scores:
Mailing Information
Company Name Date
Contact Name Job Title
Mailing Address
City State/Province ZIP/Postal Code
Country Phone ( ) Extension
Fax ( ) E-mail
Can we contact you further concerning our documentation? Yes No
You can also send us your comments by e-mail to [e-mail], or by fax to 408-527-8089.
The document is written at my technical
level of understanding. The information is accurate.
The document is complete. The information I wanted was easy to find.
The information is well organized. The information I found was useful to my job.
% %
% %

BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 4631 SAN JOSE CA
POSTAGE WILL BE PAID BY ADDRESSEE
ATTN DOCUMENT RESOURCE CONNECTION CISCO SYSTEMS INC 170 WEST TASMAN DRIVE SAN JOSE CA 95134-9883
NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES

iii
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, PartNumber 78-10467-04 Rev C0, October 2001
CONTENTS
About This Manual xxi
Objectives xxi
Audience xxi
Organization xxii
Related Documentation xxiii
Conventions xxiv
Command Changes xxv
New Commands xxv
Changed Commands xxvi
Removed Commands xxvi
CHAPTER 1Command Line Interface Overview 1 - 1
The Role of the CLI 1 - 1
Command Line Prompt 1 - 2
Command Syntax 1 - 2
Notation 1 - 3
Position-Dependent and Keyword-Driven Parameters 1 - 3
Command Entry 1 - 3
Contents of a Command Description 1 - 3
Identifyingthe AXSM Models 1 - 4
Connection Capacities of the AXSM 1 - 5
Identifying Physical and Logical Elements 1 - 5
AXSM Format 1 - 5
PNNIFormat 1 - 6
Listof Commands 1 - 7
?1 - 8
bye 1 - 9
cc 1 - 10
cd 1 - 11
clrscrn 1 - 12
cmdhistory 1 - 13
copy 1 - 15
cp 1 - 16

Contents
iv
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
del 1 - 17
exit 1 - 18
help 1 - 19
history 1 - 20
logout 1 - 21
ls 1 - 22
ping 1 - 24
pwd 1 - 25
who 1 - 26
whoami 1 - 27
CHAPTER 2Shelf Management Commands 2 - 1
Position-Dependent and Keyword-Driven Parameters 2 - 1
Command Entry 2 - 2
Identifyingthe AXSM Models 2 - 2
Connection Capacities of the AXSM 2 - 2
Identifying Physical and Logical Elements 2 - 3
AXSM Format 2 - 3
PNNIFormat 2 - 4
abortrev 2 - 6
addtrapmgr 2 - 9
adduser 2 - 10
bootChange 2 - 12
burnboot 2 - 14
clidbxlevel 2 - 15
clrallcnf 2 - 16
clrcnf 2 - 17
cnfclkparms 2 - 19
cnfclksrc 2 - 20
cnfdate 2 - 24
cnfname 2 - 25
cnfndparms 2 - 26
cnfpasswd 2 - 30
cnfserialif 2 - 31
cnfsnmp 2 - 32
cnftime 2 - 34
cnftmzn 2 - 35

Contents
v
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
cnftmzngmt 2 - 36
cnfuser 2 - 37
commitrev 2 - 39
delclksrc 2 - 41
deltrapmgr 2 - 42
deluser 2 - 43
downloadflash 2 - 44
dspbkpl 2 - 45
dspcd 2 - 46
dspcds 2 - 49
dspclksrcs 2 - 51
dspdisk 2 - 55
dspipconntask 2 - 56
dspipif 2 - 57
dspipifcache 2 - 59
dspndparms 2 - 60
dsppvcif 2 - 61
dsprevs 2 - 63
dspserialif 2 - 66
dspsnmp 2 - 67
dsptrapmgr 2 - 68
dspusers 2 - 69
dspversion 2 - 70
ipifconfig 2 - 72
loadrev 2 - 75
pvcifconfig 2 - 79
resetsys 2 - 81
restoreallcnf 2 - 82
runrev 2 - 83
routeShow 2 - 86
routestatShow 2 - 87
saveallcnf 2 - 88
setipconndebug 2 - 90
setrev 2 - 91
svcifconfig 2 - 95
switchcc 2 - 97
telnet 2 - 98

Contents
vi
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
timeout 2 - 100
users 2 - 101
CHAPTER 3Equipment and Resource Provisioning 3 - 1
Position-Dependent and Keyword-Driven Parameters 3 - 1
Command Entry 3 - 2
Identifyingthe AXSM Models 3 - 2
Connection Capacities of the AXSM 3 - 2
Identifying Physical and Logical Elements 3 - 3
AXSM Format 3 - 3
PNNIFormat 3 - 4
addapsln 3 - 6
addcontroller 3 - 8
addfdr 3 - 11
addpart 3 - 12
addport 3 - 15
addred 3 - 18
addrscprtn 3 - 19
clrbecnt 3 - 21
clrfdrstat 3 - 22
cnfapsln 3 - 23
cnfatmln 3 - 25
cnfcdsct 3 - 27
cnfln 3 - 29
cnfpart 3 - 32
cnfport 3 - 34
cnfrscprtn 3 - 36
delapsln 3 - 38
delcontroller 3 - 39
delfdr 3 - 40
delpart 3 - 41
delport 3 - 42
delred 3 - 43
delrscprtn 3 - 44
dnlmi 3 - 45
dnln 3 - 46
dnport 3 - 47

Contents
vii
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
dspapsbkplane 3 - 48
dspapsln 3 - 49
dspapslns 3 - 51
dspatmln 3 - 52
dspbecnt 3 - 53
dspcd 3 - 54
dspcds 3 - 57
dspcdsct 3 - 59
dspcon 3 - 64
dspcons 3 - 68
dspcontrollers 3 - 71
dspfdr 3 - 72
dspfdrs 3 - 73
dspfdrstat 3 - 74
dspln 3 - 75
dsplns 3 - 77
dspload 3 - 79
dsppart 3 - 81
dspparts 3 - 83
dspport 3 - 84
dspports 3 - 86
dspportsct 3 - 87
dspred 3 - 94
dsprscprtn 3 - 95
dsprscprtns 3 - 97
dspsct 3 - 98
dsptotals 3 - 102
switchapsln 3 - 103
switchredcd 3 - 104
uplmi 3 - 105
upln 3 - 106
upport 3 - 107
CHAPTER 4ILMI Commands 4 - 1
Position-Dependent and Keyword-Driven Parameters 4 - 1
Command Entry 4 - 1
Identifying Physical and Logical Elements 4 - 2

Contents
viii
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
AXSM Format 4 - 2
PNNIFormat 4 - 2
addprfx 4 - 4
clrilmicnt 4 - 5
cnfaddrreg 4 - 6
cnfautocnf 4 - 7
cnfilmi 4 - 8
cnfilmienable 4 - 10
cnfilmiproto 4 - 12
dbgilmi 4 - 14
delprfx 4 - 15
dnilmi 4 - 16
dspilmi 4 - 17
dspilmiaddr 4 - 18
dspilmicnt 4 - 19
dspilmis 4 - 20
dsppnilmi 4 - 21
dspprfx 4 - 23
upilmi 4 - 24
CHAPTER 5PNNI Commands 5 - 1
PNNI Addressing 5 - 2
Position-Dependent and Keyword-Driven Parameters 5 - 3
Command Entry 5 - 3
Identifyingthe AXSM Models 5 - 3
Identifying Physical and Logical Elements 5 - 4
AXSM Format 5 - 4
PNNIFormat 5 - 5
addpnni-node 5 - 6
addpnni-summary-addr 5 - 12
aesa_ping 5 - 15
cnfpnni-election 5 - 18
cnfpnni-intf 5 - 21
cnfpnni-link-selection 5 - 24
cnfpnni-mtu 5 - 26
cnfpnni-node 5 - 27
cnfpnni-pkttrace 5 - 33

Contents
ix
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
cnfpnni-routing-policy 5 - 35
cnfpnni-scope-map 5 - 39
cnfpnni-svcc-rcc-timer 5 - 41
cnfpnni-timer 5 - 43
dbgpnni 5 - 47
delpnni-node 5 - 51
delpnni-summary-addr 5 - 52
dsppnni-bn-path 5 - 53
dsppnni-bypass 5 - 56
dsppnni-dbg 5 - 58
dsppnni-election 5 - 60
dsppnni-idb 5 - 62
dsppnni-inducing-uplink 5 - 64
dsppnni-intf 5 - 66
dsppnni-link 5 - 69
dsppnni-link-selection 5 - 71
dsppnni-mtu 5 - 73
dsppnni-neighbor 5 - 74
dsppnni-node 5 - 77
dsppnni-node-list 5 - 81
dsppnni-path 5 - 87
dsppnni-pkttrace 5 - 92
dsppnni-ptse 5 - 94
dsppnni-reachable-addr 5 - 104
dsppnni-routing-policy 5 - 108
dsppnni-scope-map 5 - 112
dsppnni-spoke 5 - 113
dsppnni-summary-addr 5 - 115
dsppnni-svcc-rcc 5 - 117
dsppnni-svcc-rcc-timer 5 - 119
dsppnni-timer 5 - 121
CHAPTER 6Logical Node, Port,and Signaling Commands 6 - 1
Types of Address 6 - 1
Position-Dependent and Keyword-Driven Parameters 6 - 2
Command Entry 6 - 2
Identifyingthe AXSM Models 6 - 2

Contents
x
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Connection Capacities of the AXSM 6 - 3
Identifying Physical and Logical Elements 6 - 3
AXSM Format 6 - 4
PNNIFormat 6 - 4
Dot Notation in ATM Addresses 6 - 5
addaddr 6 - 6
addfltset 6 - 9
addpnport 6 - 12
aesa_ping 6 - 14
clrpnconstats 6 - 16
clrsigstats 6 - 18
clrsscopstats 6 - 20
cnfe164justify 6 - 21
cnfenhiisp 6 - 22
cnffdonaal5 6 - 23
cnffltset 6 - 24
cnfintfcongth 6 - 26
cnfnodalcongth 6 - 28
cnfpnctlvc 6 - 31
cnfpnportacc 6 - 33
cnfpnportcac 6 - 34
cnfpnportcc 6 - 36
cnfpnportloscallrel 6 - 38
cnfpnportrange 6 - 39
cnfpnportsig 6 - 41
cnfsig 6 - 45
cnfsigdiag 6 - 48
cnfspvcprfx 6 - 51
cnfsscop 6 - 53
cnftrapip 6 - 55
deladdr 6 - 56
delfltset 6 - 58
delpnport 6 - 59
delpnportacc 6 - 60
delsigdiag 6 - 61
disablesscop 6 - 63
dnpnport 6 - 64

Contents
xi
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
dspaddr 6 - 65
dspatmaddr 6 - 66
dspconsegep 6 - 67
dspenhiisp 6 - 68
dspfltset 6 - 69
dspintfcongcntr 6 - 71
dspintfcongflags 6 - 72
dspintfcongth 6 - 73
dspnodalcongcntr 6 - 74
dspnodalcongflags 6 - 75
dspnodalcongth 6 - 76
dsppingatmaddr 6 - 78
dsppncon 6 - 79
dsppncons 6 - 81
dsppnconstats 6 - 83
dsppnctlvc 6 - 86
dsppnport 6 - 87
dsppnportcac 6 - 89
dsppnportcc 6 - 90
dsppnportidmaps 6 - 91
dsppnportloscallrel 6 - 92
dsppnportrange 6 - 93
dsppnportrsrc 6 - 94
dsppnports 6 - 95
dsppnportsig 6 - 99
dsppnsysaddr 6 - 100
dspsig 6 - 103
dspsigdiag 6 - 104
dspsigparm 6 - 106
dspsigstats 6 - 107
dspspvcprfx 6 - 110
dspsscop 6 - 111
dspsscopstats 6 - 113
dspsvcparm 6 - 114
dsptrapip 6 - 115
tstpndelay 6 - 116
uppnport 6 - 117

Contents
xii
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
CHAPTER 7SPVC and SVC Commands 7 - 1
Position-Dependent and Keyword-Driven Parameters 7 - 1
Command Entry 7 - 2
Identifyingthe AXSM Models 7 - 2
Connection Capacities of the AXSM 7 - 2
Identifying Physical and Logical Elements 7 - 3
AXSM Format 7 - 3
PNNIFormat 7 - 4
addcon 7 - 6
clrpncon 7 - 15
clrpnconstats 7 - 17
cnfabr 7 - 18
cnfabrtparmdft 7 - 20
cnfcdvtdft 7 - 22
cnfcon 7 - 24
cnfconsegep 7 - 28
cnfmbsdft 7 - 29
cnfoamsegep 7 - 30
delcon 7 - 31
delcons 7 - 32
delconsegep 7 - 33
dncon 7 - 34
dspabrtparmdft 7 - 35
dspcdvtdft 7 - 36
dspcon 7 - 37
dspconinfo 7 - 41
dspcons 7 - 42
dspconsegep 7 - 46
dspmbsdft 7 - 47
dspoamsegep 7 - 48
dsppncon 7 - 49
dsppncons 7 - 52
dsppnconstats 7 - 54
upcon 7 - 56
upport 7 - 57

Contents
xiii
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
CHAPTER 8Network Optimization Commands 8 - 1
Position-Dependent and Keyword-Driven Parameters 8 - 1
Command Entry 8 - 1
Identifyingthe AXSM Models 8 - 2
Connection Capacities of the AXSM 8 - 2
Identifying Physical and Logical Elements 8 - 3
AXSM Format 8 - 3
PNNIFormat 8 - 4
cnfpnportloscallrel 8 - 5
cnfrrtparm 8 - 6
cnfrteopt 8 - 8
cnfrteoptthld 8 - 11
dspload 8 - 12
dsppnportloscallrel 8 - 15
dsprrtparm 8 - 16
dsprteoptcnf 8 - 17
dsprteoptstat 8 - 18
optrte 8 - 19
routeShow 8 - 21
routestatShow 8 - 22
rrtcon 8 - 23
CHAPTER 9Troubleshooting Commands 9 - 1
Position-Dependent and Keyword-Driven Parameters 9 - 1
Command Entry 9 - 1
Identifyingthe AXSM Models 9 - 2
Identifying Physical and Logical Elements 9 - 2
AXSM Format 9 - 2
PNNIFormat 9 - 3
abortofflinediag 9 - 5
addchanloop 9 - 6
addlnloop 9 - 8
clrallcnf 9 - 9
clralmcnt 9 - 10
clrbecnt 9 - 11
clrcdcnt 9 - 12
clrchancnt 9 - 13

Contents
xiv
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
clrchancnts 9 - 14
clrdiagerr 9 - 15
clrdiagstat 9 - 16
clrerr 9 - 17
clrerrhist 9 - 18
clrilmicnt 9 - 19
clrlncnt 9 - 20
clrlog 9 - 21
clrportcnt 9 - 22
clrportcnts 9 - 23
clrxbaralm 9 - 24
clrxbarerrcnt 9 - 25
cnfalm 9 - 26
cnfdiag 9 - 31
cnfdiagall 9 - 35
cnfpnportloscallrel 9 - 37
cnfxbarerrthresh 9 - 38
cnfxbarmgmt 9 - 40
conntrace 9 - 42
copycons 9 - 43
dbgcon 9 - 45
delchanloop 9 - 46
dellnloop 9 - 47
dncon 9 - 48
dnln 9 - 49
dnport 9 - 50
dspalm 9 - 51
dspalmcnf 9 - 53
dspalmcnt 9 - 55
dspalms 9 - 57
dspbecnt 9 - 59
dspcd 9 - 60
dspcdalms 9 - 63
dspcdbucketcnt 9 - 66
dspcdcnt 9 - 67
dspcderrs 9 - 69
dspcds 9 - 70

Contents
xv
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
dspcdstatus 9 - 72
dspchancnt 9 - 75
dspchanloop 9 - 76
dspchantests 9 - 77
dspclkalms 9 - 79
dspclksrcs 9 - 81
dspcon 9 - 84
dspconinfo 9 - 88
dspcons 9 - 90
dspcons-dbg 9 - 94
dspcontrollers 9 - 95
dspdiagcnf 9 - 96
dspdiagerr 9 - 98
dspdiagstat 9 - 100
dspdiagstatus 9 - 101
dspenvalms 9 - 103
dsperr 9 - 106
dsperrhist 9 - 108
dspilmicnt 9 - 110
dspln 9 - 111
dsplncnt 9 - 113
dsplns 9 - 115
dsplog 9 - 117
dsplogs 9 - 120
dspndalms 9- 121
dsppnportloscallrel 9 -124
dspportcnt 9 - 125
dspprfhist 9 - 127
dspswalm 9 - 128
dsptrapmgr 9 - 130
dspxbar 9 - 131
dspxbaralm 9 - 134
dspxbarerrcnt 9 - 136
dspxbarerrthresh 9 - 138
dspxbarmgmt 9 - 140
dspxbarstatus 9 - 141
dumptrace 9 - 143

Contents
xvi
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
offdiagstat 9 - 144
ondiagstat 9 - 145
pathtraceie 9 - 146
pathtracenode 9 - 147
pathtraceport 9 - 148
resetcd 9 -150
resetsys 9 - 151
switchcc 9 - 152
tstconseg 9 - 153
tstdelay 9 - 155
upcon 9 - 158
upln 9 - 159
upport 9 - 160
INDEX

FIGURES
xvii
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Figure 5-1 Cisco Factory-shipped Node-Addressing Defaults Mapping into Both NSAP and DCC Address Formats 5 - 2
Figure 5-2 Switch-Level ATM Address 5 - 7
Figure 5-3 PNNI Logical Node Identifier 5 - 8
Figure 5-4 Peer Group Identifier 5 - 8
Figure 5-5 Cisco Factory-shipped Defaults for PNNI Peer Group Identifier, PNNI Summary Address, ATM Address, and
PNNI Node Identifier 5 - 12
Figure 5-6 Cisco Factory-shipped Defaults for PNNI Peer Group Identifier, PNNI Summary Address, ATM Address, and
PNNI Node Identifier 5 - 31
Figure 5-7 Cisco Factory-shipped Defaults for PNNI Peer Group Identifier, PNNI Summary Address, ATM Address, and
PNNI Node Identifier 5 - 78
Figure 5-8 Multi-Peer Group 5 - 83
Figure 5-9 A List of Nodes in a Multi-Peer Group 5 - 84
Figure 6-1 An SPVC With Endpoints and a Via Node 6 - 97
Figure 6-2 Cisco Factory-shipped Defaults for PNNI Peer Group Identifier, PNNI Summary Address, ATM Address, and
PNNI Node Identifier 6 - 101
Figure 9-1 Connection (Channel) Loopbacks on the Ingress and Egress 9 - 6
Figure 9-2 Alarm Type Hierarchy 9 - 73

Figures
xviii
Cisco MGX 8850 Routing Switch Command Reference Release 2.0, Part Number 78-10467-04 Rev C0, October2001