Citizen CMP-20 Service manual

Installation
& Instruction
Manual
P.O. Box 36550
Indianapolis, IN 46236-0550
3130 N. Mitthoeffer Rd.
Indianapolis, IN 46235-0550
[phone]
FAX [phone]
WEB:www.standardchange.com
8M00598 REV. 2

3
PRINTER OVERVIEW
The Audit Printer can be used in any machine equipped with an EF Module or EF+ Module. This option
allows the variety of Audits and in some machine models, can print the Event or Error logs. Review the
machines owner manual for your changer to determine the audits and logs that are available for your
specific machine model.
Citizen CMP-20
Portable Audit Printer
Locating The Printer In Your Machine
Find an open spot where you can easily access the printed receipt and where the printer will be stable. The
printer should be positioned to allow easy access to for loading paper. An optional mount is included in the
printer kit. This mount can be used to secure the printer onto existing machine studs (if available) or to
secure the printer connector to the printer. If the printer is moved around frequently we recommend using
the mount as a strain relief to prevent failure of the printer connector.
Connecting The Printer To An EF Module
See the illustration below for power and data cable connections.
MODULAR CHANGER WITH EF MODULE
Powe
r
Data Cable

4
Connecting The Printer To A EF+ Module
The Portable Audit Printer connects to the Serial Port on the bottom of the EF+ Module. The Serial Port
will be indicated by the “PRINTER” on the decal above the connector. Using the Data Cable supplied in
the kit, you make the serial connection to the EF+ Module. Follow the instructions for printing a report
below.
CONNECTION OF PORTABLE AUDIT PRINTER TO EF+ MODULE
EF+ Module
Data Cable
(supplied)
Connecting The Printer To A GXPController
Important - The GXP cannot be equipped with a receipt printer AND a portable audit printer. To connect
the portable audit printer, remove the Control Module cover. A decal identifying all connections on the
Controller is located inside the cover. Find the connector labeled “Printer”, the connector on the board is
also marked with a small piece of blue tape. Connect the Data cable into the GXP Controller connector.
Connect the other end of the “data cable” (see picture above-gray cable) to the communication cable (black
cable) supplied with the printer. Connect the other end of the communication cable to the printer. Connect
the printer power supply into an available outlet in the GXP.
PRINTING AN AUDIT
Step through the available menu’s until you find the “AUDIT” menu. Step into this menu until you come to
“Print Audit?” Answer yes and the audit will print.

5
TROUBLESHOOTING
Make sure that the communication cable and power cables are firmly seated to the printer. The Power light
on the printer will be on if the power is properly connected.
Standard Change-Makers – Factory and Home Office
P.O. Box 36550
Indianapolis, IN 46236-0550
3130 North Mitthoeffer Road
Indianapolis, IN 46235-0550
[phone]
800-968-6955
FAX [phone]
EMAIL: [email protected]
WEB: www.standardchange.com
_
_______________________
/ \
| DETAIL AUDIT |
| Location id 1234 |
| 11-02-11 WED 15:07:45 |
\_______________________/
deposits:
total = $12.25
coins = $0.25
credits = $0.00
bills = $12.00
$1 bills = 2
$5 bills = 0
$10 bills = 1
$20 bills = 0
vends:
25c dispenser = 13
25c dispenser = 12
10c dispenser = 12
5c dispenser = 12
------------------------------
Description
A
unique identifier entered by the owne
r
D
escription
D
ate, day abbreviation, and Timestamp
Category description
Sum of all coins, credits and bills
Sum of coins deposited
Sum of credit dollars used
Sum of bills accepted.
N
umber of $1 bills accepted
N
umber of $5 bills accepted
N
umber of $10 bills accepted
N
umber of $20 bills accepted
Category description
N
umber of items dispensed from Hopper A.
N
umber of items dispensed from Hopper B.
N
umber of items dispensed from Hopper C.
N
umber of items dispensed from Hopper D.
Separation line