Citizen 6P73 User manual

FEATURES : ANALOG MULTI-HAND QUARTZ WATCH WITH DATE AND 24HOUR
A) DISPLAY
B) OPERATION PROCEDURE
C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE, SECOND)
D) SETTING THE DATE (BY QUICK OPERATION)
A) DISPLAY
B) OPERATION PROCEDURE
1 SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
2 SETTING THE DATE
Cal. 6P73 Instruction manual
24HOUR HAND
DATE
HOUR HAND
SECOND HAND
MINUTE HAND
NORMAL CROWN POSITION
1ST POSITION
2ND POSITION
NORMAL CROWN POSITION
1ST POSITION
2ND POSITION QUICK OPERATION - DATE (COUNTERCLOCKWISE)
TIME/DAY SETTING (CLOCKWISE)
1 / 2

C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute and second are set by the same operation.
SETTING PROCEDURE
Pull the crown out to the 2nd position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired
time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to
the normal position to start the second hand going.
NOTE: Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)
Check am./p.m. by the 24hour hand.
D) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set
the date quickly.
NOTE:
* Do not set the date between the hours 9:00p.m. and 0:30a.m..The date may not change
correctly the next day.
These specifications might be changed without prior notice.
HOUR
&24HOUR
MINUTE SECOND
2 / 2