Citizen YP17747 User manual

bALARM
Alarm Time Setting
2. Press "D"to increase thehour,
press and hold toincrease
at high speed;
3. Press "B"to select the minutes;
4. Press "D"to increase the
minutes,press and hold to
increase at highspeed;
5. Press "A"to exit theset state,
after you set.
Alarm and Chime
The alarm sounds at the preset time each day for
about 60 seconds, press anybutton to breakit.
USER'S GUIDE
YP17747(MULTI FUNCTION SPORT WATCH)
BUTTONS
The operation ofbuttons are indicatedby using
the letters shownin the illustration.
A -- Reset
B -- Mode
E -- EL backlight
D -- Start/ Stop
A T T E N T I O N
1. Never tryto open thecase or removeits back cover.
2. Do notoperate buttons underwater.
3. Should moistureappear inside thewatch,have it
checked immediately by yourdealer. Otherwise
it can causeerosion of themetal parts ofthe watch.
4. Though thewatch is designedto withstand
normal use, youshould avoid roughuse or
dropping the watch.
5. Avoidexposing the watch totemperature extremes.
6. Wipe thewatch with dry, Soft clothonly. Avoid all
owing it tocome into directcontact with chemical
materials, which cancause deterioration ofthe
plastic parts ofthe watch.
7. Avoidto wear the watchin electromagnetic,
static conditions.
Time Setting
6. Press "A"to exit theset state, after
you set.(The dayof week is autom-
atically displayed in accordancewith
year, monthand date setting)
TIMEKEEPING
a
12/24H Format
1. In the timekeeping mode,press and
hold "A" until the seconds to flash;
(flashing indicated in set mode)
3. Press "B"change to the
next selection;
4. Press "D"to increase thenumber,
press and holdto increase at
high speed;
2. Press "D" to reset the seconds ;
In the timekeeping mode,
press and hold "D" to display:
Year, Month, Date.
Calendar
In the timekeeping mode, press "A"
to switch between 12/24H formats.
11
100 Years Calendar
Battery(CR2025)
EL Backlight
Dual Time Alarm
Stopwatch
Chime
100M Water Resistant
100
The screen shownin below:
DISPLAY
BACKLIGHT
The backlight that usesan EL (electro-luminescent)
cause the display toglow for easy readingin the dark.
Use EL Backlight
In any mode, press
"C" or "E"to illuminate the
display about 3 seconds.
MODE SELECTION
The alarm sounds at the
preset time each day.
Hourly time signal;
bALARM
Measuring range:
0'00"00 ~ 23:59'59".
1/100 second unit;
c
STOPWATCH
The time for other time zone.
d
DUAL TIME
Press "B" tochange mode tomode in the
following Sequence:
Timekeeping Mode Alarm Mode
Stopwatch Mode DualTime Mode.
A Lap Time
c
STOPWATCH
1. In the stopwatch mode,
press "D" tostart the
stopwatch;
2. To stop the stopwatch
by pressing "D"again;
3. Press "A"to reset thestopwatch.
Split Time
1. In the stopwatch mode,press "D"
to start thestopwatch;
2. Press "A"to display thesplit time,
stopwatch timing continues
internally;
4. Repeat step2 and 3, you can
measure themulti splittime;
3. Press "A"to clear thesplit time and
to continue time measurement;
5. Press "D" to stop the stopwatch.
d
DUAL TIME
Dual Time Setting
1. In the dual time mode,
press "A" thehour to
flash; (flashing
indicated in set mode)
2. Press "D" to increase
the hour,press and
hold to increaseat
high speed;
3. Press "B"to select the
minutes;
4. Press "D"to change the
minutes; (press once
change 30 minutes)
5. Press "A" toexit the set state,after you set.
5. Repeat step3 and 4,the selection
in the followingsequence:
Seconds Hour Minutes
Year Month Date;
In the alarm mode, press
"D" to on/off the alarm
and chime inthe
following sequences:
Alarm & Chime off
Alarm on Chime on
Alarm & Chime on.
1. In the alarm mode, press "A" the
hour to flash, the indicator " "
appear;(flashing indicated in
set mode)
Hour, Minutes, Seconds,
Day of week, Date;
100 years Calendar (2000 ~ 2099).
12/24H Format;
a
TIMEKEEPING
C -- EL backlight
" D "" A "
" B "
" E "
" C "
Hour Seconds
Minutes
Day of week Date
CITIZEN WATCH CO.,LTD.
Q&Q SALES DEPARTMENT