Citizen miyota User manual

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMEN
T
CALIBER NO. 6L71
BATTERY: SR626W
INSTRUCTION MANUAL
A
)DISPLAY
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
second hand begins to run.
C) SETTIN THE ALARM
1. Pull the crown out to the 1st position.
2. Turn the crown to set the alarm indicator.
In the case of alarm setting within one hour, turn the alarm indicator
counter-clockwise.
D) Alarm sound ON / OFF
A
larm ON: Pull the alarm button out. Alarm function is set and alarm sound
can be heard at the time you set.
A
larm OFF: Push the alarm button fully. Alarm sound stops.
REMARKS:
Within 3minutes after alarm sounded 15 seconds, if you reset the position of
the alarm indicator, alarm sound may not be heard.
In that case, push the alarm button once and pull it out again.
Hour hand
Minute hand
Normal crown
position
1st position
Second hand
Alarm button: OFF
Alarmbutton: ON
Alarm Indicator
2nd position

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMEN
T
CALIBER NO. 6L76
BATTERY: SR626W
INSTRUCTION MANUAL
A
)DISPLAY
*Date position may be located at different position depends on models.
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
not change the following day.
3. After the date has been set, push the crown back to the normal position.
D) SETTIN THE ALARM
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the alarm indicator.
In the case of alarm setting within one hour, turn the alarm indicator
counter-clockwise.
E) Alarm sound ON / OFF
A
larm ON: Pull the alarm button out. Alarm function is set and alarm sound
can be heard at the time you set.
Hour hand
Minute hand
Normal crown
position
1st position
Second hand
Alarm button: OFF
Alarmbutton: ON
Alarm Indicator
2nd position
*Date

A
larm OFF: Push the alarm button fully. Alarm sound stops.
REMARKS:
Within 3minutes after alarm sounded 15 seconds, if you reset the position of
the alarm indicator, alarm sound may not be heard.
In that case, push the alarm button once and pull it out again.