Clack Res-Up User manual

Res-Up®
Feeders
The most efcient water softener media are resin
beads honeycombed with microscopic pores. As raw
water passes through the medium impurities are
deposited around the resin beads and in the pores.
The brine bath removes the impurities but, alone,
can't penetrate the pores or remove iron and slime
deposits.
RES-UP CLEANER is formulated to penetrate bead
pores and loosen up and oat away iron and other
impurities. Res-Up Cleaner will also keep softener
components and control valve parts free of build-ups
which impair proper functions.
RES-UP FEEDER is a programmed feeder which
meters the proper amount of Res-Up Cleaner each
time the resin bed is regenerated. The Res-Up Feeder
can be programmed for the size of the resin bed and
the amount of iron and impurities in the raw water.
Programmed Feeder and Resin
Cleaner for more efcient water
conditioning resin and brine systems.
BRINE
WELL
BRINE TANK
RES-UP
FEEDER
Figure 1

Res-Up® Feeders
1. Remove brine tank cover.
2. Attach bracket to Res-Up
Feeder (plastic container)
and position in brine tank
next to brine well as shown
in Figure 1 on the front of
this sheet.
3. Drill
9⁄16" hole in brine well
cap for Feeder. Drill two 3⁄8”
holes in brine tank, under
rim, for bracket and
grommets.
4. Remove Feeder and ll to
top with water so the
lter stone tube and wick
are immersed. Allow to soak
for 15 minutes or more.
5. Empty container and pull
tubing until stone is upright,
and resting in bottom of
stone well.
6. Insert free end of tube into
brine well cap. This end
of the tube must be below
the bottom level of the
Feeder.
7. Reinstall Feeder and
bracket.
8. Fill plastic container with
Res-Up®Cleaner to the
"Fill Line" on label.
9. Replace cover on container
and automatic feeding will
occur within a few hours.
10. On S6306 Clear 1.0 oz
there is no lter stone.
Make sure knotted wick
end is at bottom of
container.
Note: Res-Up is not to be used with Gel Zeolite. In the event the resin bed is initially contaminated you may add quantities of
Res-Up cleaner directly into the brine well to start the cleaning action immediately.
Res-Up Cleaner and Feeder Application Guide
APROX. RESIN
BED SIZE
DELIVERY
FEED
REGENERATION CYCLE (12 DAY CLOCK)
1 Cycle 2 Cycle 3 Cycle 4 Cycle 5 Cycle
1⁄2cu. ft
Light
Medium
Heavy
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
3⁄4cu. ft.
Light
Medium
Heavy
Yellow
Clear
Clear
Yellow
Yellow
Clear
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
1 cu. ft.
Light
Medium
Heavy
Clear
Clear
Clear
Yellow
Yellow
Clear
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
ORDER
NUMBER
FEEDER
SIZE
FEED COLOR
CODE
AVERAGE DELIVERY
PER DAY
UNIT
CTN
CTN
WEIGHT
S6304 3 Pints Yellow Tubing .40 oz 12.0 cc 12 5 Lbs.
S6305 3 Pints Clear Tubing 1.00 oz 30.0 cc 12 5 Lbs.
T6001-04 1 Quart Res-Up Cleaner 12 8 Lbs.
T6002-04 1 Gallon Res-Up Cleaner 4 38 Lbs.
Recommended Dosages:
For heavily fouled softener
beds use 3-4 oz per cubic
foot for initial cleanup. For
preventive maintenance,
use 1⁄2-1 oz per cubic foot
per regeneration.
4462 DURAFORM LANE • WINDSOR, WISCONSIN 53598-9716 USA
phone [phone] fax [phone] sales /customer service fax [phone] Form No. 1677 • 12/1/2011
www.clackcorp.com