Axeon Hydrogen User manual

User's Manual
Hydrogen Water Generator

Hydrogen
Water Generator
Features :
Great Permeability and Diffusivity
Hydrogen can permeate both water soluble matters and fat soluble
matters. It can reach mitochondria,where the active oxygen is generated.
Selectivity
Hydrogen will not remove useful free radicals, it only removes the harmful
free radicals, such as O:OH, ONOO C H O
Strong Reducibility
Every hydrogen molecule will be evenly surrounded by some water
molecules to be a small molecule group. These molecule groups can
easily permeate the cytoderm to remove the harmful oxygen free
radicals.
Safety
Japan Ministry of Health, Labour and Welfare approves hydrogen as food
additives.
“Criterion and Specification of Food Additives" of Korea stipulated that
hydrogen can be added into beverages. ( KFDA, No. 150224)
Benefits of Hydrogen Water
♦ Anti-wrinkle,
♦ Whiten, remove Freckle
♦ Slimming, Detoxifying
♦ Improve Immunity, Prevent Disease
♦ Improve micro circulation, coordinate intestines and stomach
How to Charge:
This generator includes a lithium battery. Please use the power cable and
plug which are fit with this generator. When LED light of the base blinks
red, please charge the generator.
1.Plug the USB Male plug into the adapter.
2. Open the charge port cover at the bottom of base, plug the
micro-B plug of USB cable into the base interface. 3.Connect the adapter
with the external power source and then
turn on the power.
4. The LED light goes red during charging. When the LED light
becomes green, it means that the power is full, please pull out the cable
and close the charge port cover.
Maintenance:
1.After using for some time, if you find there is white scale on the
body and the base, please put warm water into the bottle to submerge
the scale, and then add some vinegar or citric acid into warm water. Wait
for a while and then wash the scale with
clean water.
2. The temperature of water, which is put in the generator or for cleaning
the base, should be below 60°C. Otherwise, the hot water may destroy
components of the generator.
18 31 4
-

Hydrogen
Water Generator
Using Method:
1. Turn on: Press the ON/OFF button once, the LED light goes on
with one beep, the hydrogen water generator works for four minutes. Or
long press the ON/OFF button, LED light goes on with two beeps, the
hydrogen water generator works for six
minutes.
2. Turn off: After the selected time (4 or 6 minutes), generator will
stop automatically. Or you can long press the ON/OFF button during
electrolysis until the LED light goes off with one beep to
stop it manually.
3.Charge: Use the output of 5V/1A cellphone adapter and USB
cable to charge.
4.Work status: During working, LED light is BLUE. During
charging, LED light is RED. When the power is full, the LED
light is GREEN.
5.If the LED light blinks red during working, it indicates that the generator
is out of power, please charge the generator immediately

Hydrogen
Water Generator

Problems and Solutions:
Solutions
Please make sure the body and the
base is tight, you can release the body
and then tighten it again. If leakage still
happens, please check whether there
is the rubber gasket in the base and
the cover, if it miss, please contact
your dealer to buy some.
Problems
When the hydrogen water generator is
used for the first time, the ion
membrane is dry and the permeation
effect may be not perfect, so that it will
lead to few bubbles and low hydrogen
concentration. But after electrolyzing
for one or two times, it will become
better. If there were still seldom .
bubbles after electrolysis for several
times, please use the water which
temperat u r e i s a b o u t 50°C to
electrolyze, aswarm water will quicken
the permeation of ion membrane. If the
situation doesn't improve, please
contact your dealer for assistance.
Please check whether the generator is
out of power. If it is, please charge it. If
you press the ON/OFF button when
the generator is full of power but the
generator doesn't work, please contact
your dealer for assistance.
After you charge the generator for
some time, pull out the power plug and
the generator still does not work, but
when you connect it with the external
power, the generator works, it means
the lithium battery breaks down. You
can connect with the external power
during electrolysis, or you can contact
your deal to change the battery.
During electrolysis,
there are hydrogen
bubbles but the LED
light does not work.
Water leakage
LED light breaks down. Please contact
your dealer for assistance.
The generator can not
charge.
LED light is off after you
press the ON/OFF button.
During the electrolysis,
there are few bubbles
Hydrogen
Water Generator

Hydrogen
Water Generator
Packing List:
hydrogen water generator, power cable, power plug, base gasket, user's
manual, guarantee card
Thank you very much for purchasing high concentration hydrogen water
generator. Please read the following information carefully.
Warning:
1.Available water source: Water source should conform to the Standards
for drinking water quality. We suggest you to use the bottled or canned
mineral water, distilled water or purified water. Do not put into any juice,
tea or milk, or else it may
damage the electrolysis plate.
2.Do not put into any conductive metal or liquid.
3. Before using this generator, please use warm water to clean it.
Generator base should not be soaked into water or flush with water,
please clean it with wet cloth.
4.Before the first time you use this product, please charge it with
an applicable power until GREEN LED goes on.
5.During using this product, please place it on a flat and stable
table. 6.Please don't use this product where fire is nearby
Product name
Model
Capacity
Net weight
Size Diameter
Operation time
Battery type
Battery capacity
Charge time
Adapter Input
Working time
Concentration
ORP
Hydrogen water generator
400ml
410g
66+1mm; Height: 243+3mm 225+3mm
4 or 6 minutes
Polymer lithium battery
1400mAh
About 2.5 hours
AC100-240V/50-60Hz Output: DC5V/1A
According to different water quality,
it can be used for about 10 times after
a full charge.
About 800ppb to 1200ppb
-500mV ~-600mV
Product Parameter: