Clarion NX700 User manual

User Manual
Bluetooth Connectivity
NX700

Bluetooth Connectivity
Bluetooth Profiles
This system incorporates Bluetooth wireless communications technology.
Devices with Bluetooth capabilities can exchange information over a distance of
about 10 meters (30 feet) without requiring a physical connection.
This system supports Bluetooth profiles as below:
zHands-free Profile (HFP)
NOTE:
zNot all Bluetooth devices support all profiles. Check the document of a Bluetooth device to
know its Bluetooth capabilities.
zWhen necessary, you can turn off the Bluetooth radio on this system. (See Section
“Turning On/Off Bluetooth Radio” for more information.)
Connecting a Bluetooth Mobile Phone
Connecting to a Mobile Phone for the First Time
1. Tap the TEL button on the Source screen or tap the on the Navi
menu.
2. Tap Setup ÆSearch Phone.
Æ
1

3. Make sure that your Bluetooth mobile phone is in discoverable mode. Tap OK
for the program to search for nearby Bluetooth mobile phones.
4. The screen shows the search result. Tap the mobile phone you want to
connect.
5. Tap Pair to connect this system with the mobile phone.
6. When prompted, enter the passkey 1234 on your mobile phone to establish a
connection. Depending on the mobile phone model, you may need to select
the hands-free service to complete the connection.
7. Tap OK. The Phone Menu screen appears.
2

Connecting from a Mobile Phone for the First Time
You will be prompted when a mobile phone wants to connect to the system.
1. Tap Accept on the system to proceed.
2. Enter the same passkey used on the mobile phone and tap Pair on the system to
establish a connection.
Disconnecting and Reconnecting the Mobile Phone
When you pair your mobile phone with this system, a connection is established
between them. The name of the connected device appears at the bottom of the
Setup menu. You can then disconnect or reconnect your mobile phone by tapping
Disconnect or Connect on the Setup menu.
3

Connecting a Paired Mobile Phone
Tap the Connect button on the Phone Menu to connect a paired phone.
Phone Operations
Placing a Call
After pairing with a mobile phone, you can place a call by using the Phonebook,
Call Log and Phone Dialer button on the Phone Menu.
Phone Dialer
1. Tap Phone Dialer on the Phone Menu.
2. Enter the telephone number.
NOTE:
zInternational calls require a country code to be included in the phone number. On this
system, the country code is separated from the rest of the number sequence by a plus (+)
sign. If you are making an international call, tap on the Dial Pad.
zTo delete the last digit entered, tap .
3. Tap .
4

Phone Book
1. Tap Phonebook button on the Phone Menu screen
2. If the contact list does not display, tap to download the contact list from
the mobile phone.
NOTE: Not all mobile phone models support the downloading of such data.
3. The contact list appears on the screen with meaning the contacts saved in
the mobile phone’s memory and meaning the contacts saved in the SIM
card.
NOTE: Not all mobile phone models support the downloading of the data saved in the
phone’s memory or the SIM Card.
Select a contact to place a call.
NOTE: You can clear the downloaded contact list by tapping . Doing so does not delete
the data on the mobile phone.
4. When a contact has more than one phone number, tapping the contact opens the
details screen. Various numbers appear on the screen with meaning work,
meaning home, and meaning mobile phone and meaning fax.
Tap the phone number to place a call.
5

NOTE: If you need to input other numbers during a call, such as an extension number, tap
Phone Dialer on the Phone Menu to open the keypad and tap the digits.
Call Log
1. Tap Call Log on the Phone Menu.
2. The call history appears on the screen with meaning incoming calls and
missed calls and meaning outgoing calls.
3. To call a number in your call history, tap the number.
4. The details of the call display on the screen such as name, number, date, and
time. Depending on your mobile phone model, not all information will be
displayed.
5. Tap .
6

NOTE: If you need to input other numbers during a call, such as an extension number, tap
Phone Dialer on the Phone Menu to open the keypad and tap the digits.
Redialing a Recently Dialed Number
To make a call using a recently dialed number:
1. Do one of the following:
zWhen in Phonebook, tap .
zWhen in Call Log, tap .
2. Tap .
7

Receiving a Call
After pairing with a mobile phone, this system will ring and display the incoming
call screen when there is an incoming call.
To receive the call, tap . To reject the call, tap .
Operations during a Call
During a phone call:
zIf you need to browse the phonebook or the message, tap and then tap
Phonebook or SMS. You cannot refresh the data.
zIf you need to input other numbers, such as an extension number, use the dial
pad and tap the digits.
zTap to mute your sound so that the other party cannot hear you. To end
the mute mode, tap the same button again.
zTap to end the call.
Viewing Messages
After pairing with a mobile phone, you can browse sent and received messages.
NOTE: You cannot send messages via this system.
1. Tap SMS on the Phone Menu.
8

2. If the messages do not display, tap to download the messages from the
mobile phone.
NOTE: Not all mobile phone models support the downloading of such data.
3. Select a message to view the full message.
The screen displays the sender, date and the message. Depending on your
mobile phone model, not all information will be displayed.
Æ
NOTE: You can clear the downloaded messages by tapping . Doing so does not delete
the data on the mobile phone.
Using the Shortcuts
Once a Bluetooth connection has been established, a shortcut will be saved. You
can then use the shortcut to reconnect a particular device without searching and
entering the passkey again.
1. Tap the Connect button on the Phone Menu.
9

2. Select the device you want to connect.
3. Tap .
NOTE:
zThe shortcuts will be cleared if you shut down the system.
zYou can delete a selected shortcut by tapping .
Turning On/Off Bluetooth Radio
Whenever you start the Bluetooth, the Bluetooth radio is turned on.
To turn off Bluetooth radio, tap the Setup button on the Phone Menu and tap
Bluetooth Off. To turn on Bluetooth radio, tap Bluetooth On button.
Æ
10

MIC Gain
You can adjust the microphone volume for hands-free calling.
Tap the Setup button on the Phone Menu and tap MIC Gain.
Æ
Tap to increase the microphone volume; tap to decrease the microphone
volume.
Info
To view the application version, address and name of the Bluetooth of the system,
tap the Setup button on the Phone Menu and tap Info.
Æ
11

Regulatory Information
Bluetooth QD ID B016101
Revision: R00
(11/2009)
Trademarks
The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. All other
brand and product names are trademarks or registered trademarks of their
respective companies.
Note
The information in this manual is subject to change without notice.
12