Clarion DXZ77SUS8 User manual

If'~ ~tn\~®
~~~~;ij~~
Owner"s manual
Mode d"emploi
Manual de instrucciones
DXZ77SUS8
CD/USB/MP3IWMAlAAC RECEIVERWITH CeNET CONTROL
AUTORADIO CD/USB/MP3IWMA IAVEC COMMANDE CeNET
RECEPTOR DE CD/USB/MP3IWMAlAAC CON CONTROL CeNET

This equipment has been tested and found to comply with the limits for aClass Bdigital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed
to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in aparticular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to consult the dealer or an
experienced radiolTV technician for help.
Cet appareil aete teste
et juge conforme aux Iimites des appareils numeriques de Classe B, aux
termes de la Section
15 des Reglements FCC.
Ces limites ant pour but d'assurer une protection raisonnable contre les interferences parasites
dans une installation residentielle.
Cet appareil engendre, utilise
et peut emettre une energie radioelectrique et, s'il n'est pas installe
et utilise
en stricte confarmite avec ces instructions, il peut provoquer des interferences parasites
sur les liaisons radiophaniques. Ceci ne garantit par pour autant qu'une installation particuliere ne
provoquera aucune interference.
Si !'appareil engendre des interferences sur la reception des andes radio au de television, ce qui
peut etre verifie
en mattant I'appareil hors tension puis sous tension, l'utilisateur est invite a
consulter son revendeur au un technicien exprimente en radio/television pour lui demander conseil.
R1?~
ID3TAG
[
-.~
-.TV ~~~~~~s J
~
'~A~IO.l
READY
I
I
I
Este equipo ha side probado y se ha comprobado que cumple can los lfmites de un dispositivo
digital de
c1ase B, segun 10 indicado en la Parte 15 de las Normas de FCC.
Estos Ifmites
se han establecido para ofrecer una protecci6n razonable contra interferencias
perjudiciales
en instalaciones residenciales.
Este equipo genera, emplea, ypuede radiar energfa de radiofrecuencia
y, si no se instala yemplea
de acuerdo can las instrucciones, puede causar interferencias perjudiciales en las
radiocomunicaciones. Sin embargo, no se garantiza que las interferencias no ocurran
en una
instalaci6n en particular.
Si este equipo causa interferencias perjudiciales en la recepci6n de radio ade televisi6n, 10 cual
podra determinarse conectando ydesconectando
la alimentaci6n del equipo, se aconseja al
usuario que consulte al abastecedor 0que pida ayuda aun tecnico en radio/television
experimentado.
MODEL Iclarion
12V 8GROUND
AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS PRODUCTION COMPLIES WITH
DHHS RULES 21 CFR
SUBCHAPTER JAPPLICABLE AT DATE
OF MANUFACTURE
CLARION CO.,LTD
50 KAMITODA,TODA-SHI.SAITAMA-KEN,JAPAN
This product includes technology owned by
Microsoft Corporation and cannot be used
or diWibuted
without alicense from MSLGP.
SERIAL No.
PEc=J
tfi:\ 276-c=::J
~ ClanonCo"Ud
MADEINc=J
Bottom View of Source Unit
Fond
de I'appareil pilote
Vista
inferior de la unidad fuente
Be sure to unfold and read the next page. ~
Veuillez depUer et vous referera fa page suivante.
Cerciorese de desplegaryde
leer /a pagina siguiente.
DXZ775USB i

Source unit/Appareilpilote/Unidad fuente
[~] (EJECT)
[SEEK PANEL]
Clarion
[MENU]
[~II ENT]
[lR RECEIVER]
With the MOTORIZED FACE opened/ Ouvrez la FACE MOTOR/SEE
Apertura del FRONTAL MOTORIZADO
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez deplier cette page et vous referer aux schemas quand vous lisez chaque chapitre.
Nota: Cuando lea los capftulos, despliegue esta pagina y consulte los diagramas.
ii DXZ775USB

I
I
I
CLARION PRODUCT REGISTRATION INFORMATION
For USA and Canada only
www.clarion.com
Dear Customer:
Congratulations on your purchase of aClarion mobile electronic products. We are
confident that you'll enjoy your Clarion experience.
There are many benefits to registering your product. We invite you to visit our website at
www.clarion.com to register your Clarion product.
We have made product registration simple with our easy to use website. The registration
form is short and easy to complete. Once you're registered, we can keep you informed of
important product information.
Register at www.clarion.com -it's easy to keep your Clarion product up to date.
INFORMATIONS DE L'ENREGISTREMENT DE PRODUITS CLARION
Pour les Etas Unis et Ie Canada seulement
www.clarion.com
Cher client:
Nous vous remercions d'avoir achete ce produit electronique mobile Clarion. Nous
sommes confiants que vous apprecierez votre experience Clarion.
II y a beaucoup d'avantage aenregistrer votre produits. Nous vous invitens avisiter notre
site Web www.clarion.com pour enregistrer votre produit Clarion.
Nous avons facilits la tache d'enregistrement de produit simple et facile grace anotre
site Web.
Le formulaire d'enregistrement est court et facile acompleter. Lorsque vous
etes enregistrer, nous pouvons vous tenir informs des informations important de produits.
Enregistrer awww.clarion.com -c'est facile de mettre ajour votre produit Clarion.
INFORMACION DEL REGISTRO DE PRODUCTO DE CLARION
Para USA YCanada nomas
www.clarion.com
Querido Cliente:
Felicitaciones por
su compra de producto electr6nico m6vil de Clarion. Estamos seguros
que usted gozara de
su experiencia con el producto de Clarion.
Hay muchas ventajas
al registrar su producto. Le invitamos aque visite nuestro sitio en
internet www.clarion.com para registrar
su producto de Clarion.
Hemos heche
el registro de producto facH en nuestro sitio. La forma de registro es corta
yfacil de completar. Una vez que
10 registre, podremos proporcionarle la informaci6n de
su producto.
Registrese
en www.clarion.com - es facil mantener su producto de Clarion actualizado.
iii OXZ775USB

I
Thank you for purchasing this Clarion product.
*Please read this owner's manual in its entirety before operating this equipment.
*After reading this manual, be sure to keep it in ahandy place (e.g., glove compartment).
*Check the contents of the enclosed warranty card and keep it carefully with this manual.
*This manual includes the operating procedures of the iPod® interface, CD/DVD changer, Satellite
Radio Receiver and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer
and TV tuner have their own manuals, but
no explanations for operating them are described.
"iPod"
is atrademark of Apple Computer, Inc., registered in the U.S. and other countries.
Contents
CONTROlS ii
1. FEATURES 1
2. PRECAUTIONS 2
Motorized Face 2
Handling Compact Discs 3
3. NOMENCLATURE 4
Names of the Buttons and Their Functions 4
Display Items 5
LCD Screen 5
4. DCP 6
5. REMOTE CONTROL 7
Inserting the Battery , , 7
Functions of Remote Control Unit Buttons 8
6. OPERATIONS 10
Basic Operations , 10
Radio Operations 20
CD/MP3/WMAJAAC Operations 22
Operations Common to Each Mode 26
7. OPERATIONS OF ACCESSORIES 30
USB Operations 30
iPod
8B Operations 32
Satellite Radio Operations 34
CD Changer Operations ,36
DVD Changer Operations , , 38
TV Operations 39
8. IN CASE OF DIFFICUl TV 40
9. ERROR DISPLAYS 42
10. SPECIFICATIONS 43
•Digital Time Alignment Control with 3-way Crossover
•Motorized Full Dot LCD with SLiDETRAK
•6ch/6V RCA Output I53W X 4 Built-in MOSFET Amplifier
DXZ775USB 1

I
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form
on the disc or the
optical parts
of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with asoft cloth.
If moisture forms on the optical parts of the
player, do not use'the player for about one
hour. The condensation will disappear
naturally allowing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. This unituses aprecision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
Motorized Face
ACAUTION
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT
BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY AND WILL VIOLATE FCC
APPROVAL.
This unit uses motorized face to make large-screen displays possible.
When you use the motorized face, be sure to close it.
ACAUTION
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE MOTORIZED FACE.
1. For safety's sake, always close the
MOTORIZED FACE before leaving this unit
unused for aprolonged period
or switching
OFF the ignition key.
If you switch OFF the ignition key with the
MOTORIZED FACE tilted, the MOTORIZED
FACE
does not close.
2. Before the MOTORIZED FACE closes, there
may be abraking sound from the safety
mechanism. This is normal.
2DXZ775USB
3. If you move the MOTORIZED FACE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[~] button to close the MOTORIZED FACE.
4. After adisc is ejected, the MOTORIZED
FACE automatically returns to the tilted or
closed state. If there is any obstruction when
the MOTORIZED FACE tries to close, the
safety mechanism is triggered and the
MOTORIZED FACE returns to the open
state. If this happens, remove the
obstruction, then press the
[~l button.
5. To avoid scratching the compact disk, keep
the CD level when inserting
or removing
them.

Handling Compact Discs
Use only compact discs bearing the ~[~~ or
ffilm~~ffil mark.
~
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded
in CD-R/CD-RW mode
may not be usable.
Handling
•Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for along time
in the car.
•New discs may Ball-point pen
have some
roughness Roughness
around the
edges. If such
discs are used,
the player may
not work or the
sound may skip. Use aball-point pen or the
like to remove any roughness from the edge
of the disc.
•Never stick labels on the surface of the
compact disc or mark the surface with a
pencil or pen.
•Never
playa compact disc with any
cellophane tape or other glue
on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
•
Do not use compact discs that have large
scratches,
are" misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
•To remove acompact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
•
Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc."These may damage the disc
or cause breakdown of the internal
mechanism.
Storage
•Do not expose compact discs to direct
sunlight or any heat source.
•Do not expose compact discs to excess
humidity or dust.
•Do not expose compact discs to direct heat
from heaters.
Cleaning
To remove fingermarks and dust, use asoft
cloth and wipe
in astraight line from the
center of the compact disc to the
circumference.
Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
After using special compact disc cleaner, let
the compact disc dry off well before playing it.
DXZ775USB 3

Note:
•Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).
Names of the Buttons and Their Functions
[RELEASE] button
•Deeply push in the button to unlock the DCP.
[SRC] button
•Press the button to turn on the power.
•Press and hold the button for 1second or
longer to turn off the power.
•Switch the operation mode among the radio
mode, etc.
[OPTION] button
•Press the button to enter the option mode.
•Press and hold the button for 1second or
longer to enter the adjust mode.
[SEEK PANEL]
•The [SEEK PANEL] allows the controls on
the ends to be moved to right or left to permit
station tuning (radio), track selection (CD),
and to perform various settings
in the
adjustment mode.
[MENU] button
•Switch the band, or seek tuning or manual
tuning while
in the radio mode.
•Press the button to enter the list search mode
while
in the CD/MP3IWMAJAAC mode.
•Press and hold the button for 1second or
longer to play the first track while
in the COl
MP3IWMAJAAC mode.
•Press the button to change the character.
[~II ENT] button
•Play or pause atrack while in the CD/MP31
WMAJAAC mode.
•Press the button to enter the preset memory
mode (radio).
•Confirm various settings.
4 DXZ775USB
[P.CH] button
• Push the button upward or downward to recall
the stored station while
in the radio mode.
•Select the folder while
in the MP3/WMA/AAC
mode.
•Perform various settings.
[J] (SOUND) button
•Press the button to enter the sound mode.
•Press and hold the button for 1second or
longer to enter the sound setting mode.
[ISR] button
• RecalliSR radio station in memory.
•Press and hold the button for 2seconds or
longer: Store current station into ISR memory
(radio mode only).
[IR RECEIVER]
•Receiver for remote control unit. (Operating
range: 30° in all directions)
[TITLE] button
•Use the button to switch the user titles or
track titles, etc. while
in the CD/MP3/WMAJ
AAC mode.
•Press and hold the button to switch the
display indication (Action display, Title display
and Clock time display).
[g4"] (MUTE) button
•Turn mute on or off.
[~] (EJECT) button
•Press to open the MOTORIZED FACE and
insert aCD into the CD SLOT.
•Press to eject aCD loaded in the unit.
[VOL] button
•Push the button upward or downward to
adjust the volume.
[CD SLOT]
•CD insertion slot.

Display Items
Source indication
•FM1-3, AM :Radio mode
•SR1-3 :Satellite radio mode (SIRIUS)
•XM1-3 :Satellite radio mode (XM)
•CD :CD/MP3JWMAlAAC mode
•USB :USB mode
•iPod :iPod BB mode
•CDC1-4 :CD changer mode
•DVDC1-4 :DVD changer mode
•TV1-2 :TV mode
•AUX :AUX mode
•TEL :Telephone mode
Source icon
(3 patterns)
•Radio mode: Preset No. /frequency
•CD mode :Track No. /playback time
•MP3JWMAlAAC mode
:Folder No. /track No. /playback time
•CD /DVD changer mode
:Disc No. /track No. /playback time
•TV mode :Preset No. /channel
Operation status indication
Titles indication
LCD Screen
A.RDM: Disc/Folder random
A.RPT :Disc/Folder repeat
A.SCN :Disc/Folder scan
ROM :Track random
RPT :Track repeat
SCN :Track/Preset/Service scan
AS :Auto store
ST :Stereo indication (radio only)
MP3 :MP3 indication
WMA :WMA indication
MANU :Manual indication
CAT MODE :Category mode indication
CH MODE :Channel mode indication
SAT :Satellite indication
DZE :Digital Z-Enhancer indication
SR :Sound restorer indication
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DXZ775USB 5

•The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
•If the [RELEASE] button is pressed and
the DCP is not locked into place, it may fall
out from vibration of the car. This can
break the DCP, so after removing it, either
install it on the unit or put it in its DCP
case.
•The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
•Ifthe DCP is dirty, wipe off the dirt with asoft, dry
cloth only.
2. Press the left side ©of the DCP carefully to
fit it
in place.
Attaching the DCP
1. Insert the DCP so that the ®section on the
right side of the DCP catches on the hook @
on the unit.
3. Pull the DCP toward you and remove it.
•Always close the MOTORIZED FACE
before removing the DCP.
•If you remove the DCP with the
MOTORIZED FACE open, the MOTORIZED
FACE closes immediately. Be careful not
to get'your fingers caught.
Removing the DCP
1. With the MOTORIZED FACE closed, turn off
the power.
2. Press the [RELEASE] button deeply to open
the DCP.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
6DXZ775USB

Inserting the Battery
CD Turn over the remote control unit and slide
the cover in the direction indicated by the
arrow in
the illustration.
®Insert the battery (CR2025) into the insertion
guides, with the printed side
(+) facing
upwards.
@) Press the battery in the direction indicated by
the arrow so that it slides into the
compartment.
@Replace the cover and slide
in until it clicks
into place.
Notes:
Misuse may result in rupture of the battery,
producing leakage
of fluid and resulting in personal
injury
or damage to surrounding materials. Always
follow these safetyprecautions:
•Use only the designated battery.
•When replacing the battery, insertproperly, with
+/- polarities orientedcorrectly.
•Do notsubjectbatteryto heat,
or dispose of in fire
or water. Do not attempt to disassemble the
battery.
•Dispose
of usedbatteries properly.
Insertion guide
DXZ775USB 7

Functions of Remote Control Unit Buttons
*Some buttons on the remote control unit have different functions from the corresponding buttons on the main
unit.
iSigna, transmitter
--------
[!],[']
Clarion
•Shared modes
[SRC] button
•Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
•Use to alternate operation mode among the
various modes.
[~], [T] buttons
•Increases and decreases volume.
[MUTE] button
•Turns mute function on and off.
[ISR] button
•Recalls ISR radio station stored in memory.
•Press and hold the button for 2seconds or
longer to store current station
in ISR memory
(radio mode only).
[DISP] button
•Press to alternate among action display, title
display and Clock time display, etc.
8DXZ775USB
•Radio/Satellite Radio modes
[BND] button
•Switches reception band.
[1ollIII~], [~~] buttons
•Moves preset channels up and down.
[SCN] button
•Press to perform preset scan.
•Press and hold the button for 2seconds or
longer to perform auto store.
•
In the Satellite Radio mode, press once to
perform category scan; hold depressed for 1
second or longer to perform preset scan.
•CD/MP3/WMA/AAC and USB
modes
[BND] button
•Press to play the first track.
[1ollIII~], [~] buttons
•Press to move the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.

Functions of Remote Control Unit Buttons
[~II] button
•Switches between playback and pause.
[SCN] button
•Press to perform scan play.
•When in MP3IWMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder scan play.
[RPT] button
•Press to perform repeat play.
•When in MP3IWMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder repeat play.
[ROM] button
•Press to perform random play.
•When
in MP3IWMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder random play.
•CD changerlDVD changer modes
[BND] button
•Press to switch to next disc in ascending
order.
[~~], [~~] buttons
•Press to move the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.
[~II] button
•Switches between playback and pause.
[SCN] button
•Press to perform scan play.
•Press and hold the button for 1second or
longer to perform'disc scan play.
[RPT] button
•Press to perform repeat play.
•Press and hold the button for 1second or
longer to perform disc repeat play.
[ROM] button
•Press to perform random play.
•Press and hold the button for 1second or
longer to perform disc random play.
•iPod BB mode
[1<lllI~], [~~] buttons
•Press to move the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.
[~II] button
•Switches between playback and pause.
[RPT] button
•Press to perform repeat play.
•Press and hold the button for 1second or
longer to perform all repeat play.
[ROM] button
•Press to perform random play.
•Press and hold the button for 1second or
longer to perform all random play.
• TVmode
[BND] button
•Switches reception band.
[1<lllI~], [~~] buttons
•Moves preset channels up and down.
[SCN] button
•Press to perform preset scan.
•Press and hold the button for 2seconds or
longer to perform auto store.
[ROM] button
•Press to alternate between TV and VTR.
DXZ775USB 9

Note:
•Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).
Basic Operations
Be sure to lower the volume before
switching
off the unit power or the ignition
key. The
unit remembers its last volume
setting. Ifyou switch the power
off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt
your
hearing and damage the unit.
Selecting speakersystem
When this product is turned on for the first time,
it allows you toselect aspeaker system.
Speaker system
Speaker Speaker configuration
system
NORMAL Front 2ch
Rear2ch Subwoofer 2ch
(Normal)
3WAY High 2ch Mid 2ch Subwoofer 2ch
(3way)
2WAY High 2ch Mid 2ch Rear 2ch
(2way)
•Normal speaker system (NORMAL)
Front speaker-~ ~. IlIrFront speaker
(left) Q ' ~ (right)
Rear speaker~ ... _. ~Rear speaker
(left)
W'-'br (right)
Subwoofer
•3way speaker system (3WA V)
Tweeter (left) l~r Tweeter (right)
t~~(1~
Front speaker-~ ~ Ill-Front speaker
(left) Q Q (right)
~-~
Subwoofer
10 DXZ775USB
•2way speaker system (2WA V)
Tweeter (left)J~l Tweeter (right)
t(l~U~
Front speaker -~ ~ IlIrFront speaker
(left) Q Q
~ (right)
~:#) speaker ~~~r,;)speaker
1. Push the [SEEK PANEL] leftward or
rightward to select the setting.
Each time you push the [SEEK PANEL]
leftward or rightward, the setting change in
the following order:
"NORMAL" +-+ "3WAY" +-+ "2WAY" +-+
"NORMAL" ...
2. Press the [~II ENT] button.
3. Push the [SEEK PANEL] leftward or
rightward to select "OK" or "CANCEL".
4. Press the [~II ENT] button to store the
setting.
*Refer to the section "Adjusting Sound Mode"
(page 12) and "Adjusting Sound Setting Mode"
(page 16).
Note:
•The first time this unitis turned on afterthe wire
connections are completed, it mustbe checked
what equipmentis connected. When the power is
turned on, "SYSTEM
CHECK" appears in the
display, then the unit returns to the selecting
speakersystem.
System check function
If you change your speaker system while the
power of this unit is on, perform the System
check function to selectthe appropriate speaker
system again. See "Performing asystem
check" (page
28) for details.
Select the speaker system suited to your
speaker configuration. Failing to do so can
damage
your speakers.

Basic Operations
Turning
on/off the power
Note:
• Be careful about using this unit for along time
witho~t running the engine. If you drain the car's
battery too far, you may not be able to start the
engine
and this can reduce the service life of the'
battery.
1. Press the [SRC] button.
The mode that was previous active
is
displayed.
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Selecting amode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes
in the following
order:
Radio'" (Satellite radio) CD/MP3IWMAI
AAC'" USB ... (iPod BB) (CD changer) ...
(DVD changer) ... (TV) ... AUX ... Radio...
*External equipment not connected with
CeNET is not displayed.
Adjusting the volume
1. Push the [VOL] button upward or downward
to adjust the volume.
*The volume level is from 0(minimum) to 33
(maximum).
Switching the display
Press and hold the [TITLE] button for 1second
or longer to select the desired display.
•When the power is turned on
1. Each time you press and hold the [TITLE]
button for 1second or longer, the display
switches
in the following order:
Action
display'" Title display'" Clock time
display'" Action display ...
•When the power is turned off
1. Each time you press the [TITLE] button, the
clock time appears or disappears
in the
display.
Mute
Use this function to turn off the sound
immediately.
1. Press the [g3I] button.
The sound turns off and "MUTE" blinks
in the
display.
2. Press the [g3I] button again to cancel the
mute mode.
DXZ775USB 11

:no sound effect
:Suitable for genuine speakers
:Suitable for separate
speakers
OlE 3 : Suitable for co-axial speakers
3-3. When the "OlE 1", "OlE 2" or "OlE 3" is
set, push the [P .CH] button upward or
downward to change the DZE level from +3
to-3.
*The factory default setting is "0".
•Adjusting the subwoofer output
volume
You can adjustthe volume output from the unit's
subwoofer output terminal.
"S-W VOLUME" can be adjusted only when
"SUB WOOFER" is set to "ST" or "MONO"
(page 19).
2-1. Select the "S-W VOLUME".
3-1. Push the [P.CH] button upward or .
downward to change the output volume.
*The factory default setting is "0".
(Setting range: +6 to -6)
•Setting the Digital Z-Enhancer
This unit are provided with 3types of sound
tone effects stored in memory. Select the one
you prefer.
*The factory default setting is "DZE OFF".
2-1. Select the "OlE".
3-1. Press the [~II ENT] button.
3-2. Push the [SEEK PANEL] leftward or
rightward to select the tone effect. Each
time you push the [SEEK PANEL], the tone
effect changes in the following order:
"OlE OFF" +--+ "OlE 1" +--+ "OlE 2" +--+ "OlE
3"
OlE OFF
OlE 1
OlE 2
To change sound mode
SOUND
~ s-w va UME
When speaker system is "NORMAL":
"S-W VOLUME"
+--+ "OlE" +--+ "P.EQ" +--+
"BASS" +--+ "TREBLE" +--+ "s RESTORER"
+--+ "HPF" +--+ "S-W LPF" +--+ "BALANCE" +--+
"FADER"
When speaker system is "3WAY":
"S-W VOLUME"
+--+ "OlE" +--+ "P.EQ" +--+
"BASS" +--+ "TREBLE" +--+ "s RESTORER"
+--+ "BALANCE"
When speaker system is "2WAY":
"OlE" +--+ "P.EQ" +--+ "BASS" +--+ "TREBLE"
+--+ "s RESTORER" +--+ "BALANCE" +--+
"FADER"
3. Push the [P.CH] button upward or
downward to select the "desired setting
value".
* In the case of item names appearing with
the "ENT" suffix after the item name, the
[~II ENT] button must be pressed to display
the setting value.
*"P.EQ" can be adjusted only when the
,"P.EQON/OFF" is set to "ON" (page 19)
and "EQ SELECT" is set to "P.EQ" (page
19).
*"BASS" and "TREBLE" can be adjusted
only when "DZE" is set to "DZE OFF" (page
12) and "EQ SELECT" is set to "BIT" (page
19).
*After completing settings, press the [ J' ]
button to return to the previous mode.
Note:
•During soundadjustmentmode, if no operation
is performedfor more than
10 seconds, this
mode can be canceled
and return to the
previous mode.
1. Press the [ J' ]button and select the sound
mode to adjust.
2. Push the [SEEK PANEL] leftward or
rightward to select the "item
name".
Basic Operations
Adjusting Sound Mode
12 DXZ775USB

Basic Operations
•Compensation
There is no need to compensate frequency
characteristics if they are flat (no peaks or
valleys) when you have measured the
frequency characteristics with ameasuring
device. However, sometimes the frequency
characteristics rise or fall
in some places. If this
happens, the frequency characteristics must be
compensated. Create afrequency curve having
characteristics that are opposite to the center
frequency of parts where the characteristics rise
and fall to cancel out these peaks and values,
and make the frequency characteristics as flat
as possible.
Making the frequency characteristics as flat as
possible is called "Compensation".
On this unit, frequency characteristics can be
compensated by P.EQ (Parametric Equalizer).
•Compensation of frequency
characteristics
The figure below shows the relationship
between the center frequency, gain
"and Q
curve.
Level
(dB)
Gain
~FreqUency
curve
Center Frequency
Frequency (F) (Hz)
• Q curve
The Qcurve becomes sharper when the
numerical value is increased, and smoother
when the numerical value is decreased.
Flat frequency characteristics can be made by
selecting a Q curve opposite to that of the curve
to be compensated.
Qcurve :20
~ Qcurve : 1
•Setting P.EQ
P.EQ (Parametric Equalizer) allows you to
compensate the entire frequency level range
in
detail by smooth curve using frequency
compensation matched to the type of your car.
The item corresponding to the system set
in the
section
"Selecting speaker system" (page 10)
will be displayed.
2-1. Select "P.EQ".
3-1. Press the
[~II ENT] button.
When speaker system is "NORMAL":
3-2. Push the [SEEK PANEL] leftward or
rightward and select from:
"SEDAN-1"
~ "SEDAN-2" ~ "MINI VAN-1"
~ "MINI VAN-2" ~ "WAGON" ~ "USER"...
P.EQ
basic menu
No.Display name Speaker Mounting
position
1SEDAN-1 Front: Front door
(sedan-1) Rear: Rear parcel
2SEDAN-2 Front: Front door
(sedan-2) Rear: Rear door
3MINI VAN-1 Front: Front door
(mini van-1) Rear: Luggage (side)
4MINI VAN-2 Front: Front door
(mini van-2) Rear: Rear door
5WAGON Front: Front door
(wagon) Rear: Luggage (side)
6USER (user) User preference
3-3. Press the [OPTION] button.
3-4. Press the [MENU] button and select from:
"BAND1"
-+ "BAND2" -+ "BAND3" -+
"BAND1"...
3-5. Push the [SEEK PANEL] leftward or
rightward and select from:
•FRONT (Front speaker)
•FREQUENCY (Frequency) (20 Hz to 20 kHz)
~t~ :,,,,",~----n
•GAIN (Gain) (-12 dB to +12 dB)
· 6(Q curve) (1,3,5,7,20)
t
•REAR (Rear speaker)
•FREQUENCY (20 Hz to 20 kHz)
t
•GAIN (-12 dB to +12 dB)
t
•Q(1, 3, 5, 7, 20)
t
•FRONT
DXZ775USB 13

Basic Operations
P.EQ basic menu setting values
F: Center frequency, Q: Qcurve, G: Gain (output level)
Parametric Equalizer Parameters (default)
No. (car type) Band 1Band 2Band 3
Channel FQGFQGFQG
1(SEDAN-1) Front 250 Hz 3
-8 dB 2kHz 1
-4 dB
5kHz 1
-4 dB
Rear 250 Hz 3
-10 dB
1.25 kHz 5odB 8kHz 5odB
2(SEDAN-2) Front 250 Hz 7
-10 dB 800 Hz 3 -4 dB 8kHz 1 -5 dB
Rear 80 Hz 7
+3dB
125 Hz 5 -12dB 1.25 kHz 5
OdB
3Front 125 Hz 5 -4 dB
1.25 kHz 3
-4 dB 2kHz 7+3 dB
(MINI VAN-1) Rear 250 Hz 1
-6 dB 630 Hz 3 -4 dB 8kHz 5odB
4Front 250 Hz 3
-4 dB 1.25 kHz 3 -8 dB 80 Hz 3
+3dB
(MINI VAN-2) Rear 250 Hz 3
-8 dB 500 Hz 5
":"5 dB
8kHz 5odB
5(WAGON) Front 250 Hz 3
-8 dB
1kHz 3 -8 dB 10 kHz 1
-6 dB
Rear 250 Hz 3
-8 dB 800 Hz 1
-8 dB 8kHz 5odB
6(USER) Front 500 Hz 1odB 1kHz 1
OdB
5kHz 1odB
Rear 500 Hz 1o
dB
1kHz 1odB 5kHz 1odB
3-6. Push the [P.CH] button upward or
downward to adjust the frequency, the gain
and the
Q.
3-7. Press and hold the [~II ENT] button for 2
seconds or longer to store the adjusting
in
USER memory and auto return to the
USER mode.
When speaker system is "3WA Y" or
"2WAY":
3-2. Press the [MENU] button and select from:
"BAND1" "BAND2" ... "BAND3"
...
"BAND1" -
3-3. Push the [SEEK PANEL] leftward or
rightward and select from:
3WAYmode
2WAYmode
-LEFT
(Front speaker (left))
-FREQUENCY
t(Frequency)
-GAIN
t(Gain)
-Q
(Q cUNe)
-LEFT
(Front speaker (left))
-FREQUENCY
t(Frequency)
-GAIN
t(Gain)
-Q
(Q cUNe)
14 DXZ775USB
-RIGHT
(Front speaker (right))
-FREQUENCY
t
-GAIN
t
-Q
t
-LEFT
-RIGHT
(Front speaker (right))
-FREQUENCY
*
-GAIN
*
-Q
t
-LEFT
3-4. Push the [P.CH] button upward or
downward to adjust the frequency, the gain
and the
Q.
Items Adjustable Initial value
range
FREQUENCY 20 Hz to 20 kHz 500 Hz
(Frequency)
GAIN (Gain)
-12 dB to +12 odB
dB
Q(Q curve)
1,3,5,7,20 1
3-5. Press the [~II ENT] button to return to the
previous mode.
Note:
•Press and holdthe [~II ENT] button for 2
seconds or longer to copy the settings between
left
and right (for 3WAY or 2WAYspeaker
system).

Basic Operations
•Adjusting the bass
2-1. Select "BASS".
3-1. Press the
[~II ENT] button.
3-2. Push the [P.CH] button upward or
downward to adjust the gain from
-6 to +6
(The factory default setting is "0").
3-3. Press the
[~II ENT] button to return to the
previous mode.
•Adjusting the treble
2-1. Select "TREBLE".
3-1. Press the
[~II ENT] button.
3-2. Push the [P.CH] button upward or
downward to adjust the gain from
-6 to +6
(The factory default setting is "0").
3-3. Press the
[~II ENT] button to return to the
previous mode.
•Adjusting the sound restorer
The sound restorer enriches the playback of all
types of music files that have undergone any
level of data compression.
2-1. Select "s RESTORER".
3-1. Push the [P.CH].button upward or
downward to adjust.
Each time you push the [P.CH] button, the
sound restorer changes
in the following
order:
"OFF"
~ "1" ~ "2" ~ "3"
*The factory default setting is "OFF".\
Set this adjustment in accordance with the
music source used
OFF: For music sources compressed at
high bit rate
1: For music sources compressed for high
quality at low bit rate
2: For music sources compressed for
standard quality at low bit rate
3: For music sources compressed for low
quality at low bit rate
•Adjusting the balance
2-1. Select "BALANCE".
3-1. Push the [P.CH] button upward to
emphasize the sound from the right
speaker, push the button downward to
emphasize the sound from the left speaker.
*The factory default setting is "0".
(Adjustment range: L12 to R12)
•Adjusting the fader
"FADER" can be adjusted only when the
speaker system is set to "2WAY" or "NORMAL".
2-1. Select "FADER".
3-1. Push the [P.CH] button upward to
emphasize the sound from the front
speaker, push the button downward to
emphasize the sound from the rear
speaker.
*The factory default setting is "0".
(Adjustment range: R12 to F12)
•Setting high pass filter
"HPF" can be adjusted only when the speaker
system is set to "NORMAL".
2-1. Select "HPF".
3-1. Push the [P.CH] button upward or
downward to select the setting. Each time
you push the [P.CH] button, the setting
changes
in the following order:
"THRGH"
~ "50Hz" ~ "80Hz" ~ "125Hz"
*The factory default setting is "THRGH"
(through).
•Setting low pass filter
"S-W LPF" can be adjusted only when the
speaker system is set to "NORMAL" .
*If subwoofer function is set to "ST" or "MONO",
"S-W LPF" can be selected.
2-1. Select "S-W LPF".
3-1. Push the [P.CH] button upward or
downward to select the setting.
Each time you push the [P.CH] button, the
setting changes
in the following order:
"THRGH"
~ "50Hz" ~ "80Hz" ~ "125Hz"
*The factory default setting is "THRGH"
(through).
DXZ775USB 15

Basic Operations
Adjusting Sound Setting
Mode
To change sound setting mode
1. Press and hold the [J]buttonfor 2
seconds or longer and select the sound
setting mode
to adjust.
2. Push the
[SEEK PANEL] leftward or
rightward to select the "item name".
When speaker system is "NORMAL":
"PRESET"
~ "ALL SEAT" ~ "T
ALIGNMENT"
~ "P.EQ ON/OFF" ~ "EQ
SELECT"
~ "SUB WOOFER" ~
"PRESET"...
When speaker system is "3WAV":
"PRESET"
~ "ALL SEAT" ~ "~-OVER"
~ "T ALIGNMENT" ~ "SPEAKER GAIN"
~ "P.EQ ON/OFF" ~ "EQ SELECT" ~
"SUB WOOFER" ~ "PRESET"...
When speaker system is "2WAV":
"PRESET"
~ "ALL SEAT" ~ "X-OVER"
~ "T ALIGNMENT" ~ "SPEAKER GAIN"
~ "P.EQ ON/OFF" ~ "EQ SELECT" ~
"PRESET"...
* In the case of item names appearing with
the "ENT" suffix, after the item name, the
[~II ENT] button must be pressed to display
the setting value.
*After completing settings, press the [J]
button to return to the previous mode.
•Setting the preset setting
This function allows you to recall, save or
initialize the sound settings.
If your speaker system is "3WAV" or "2WAV",
yoU can store and recall up to three adjustments
you have made to "P.EQ ON/OFF", "X-OVER",
"T ALIGNMENT", "SPEAKER GAIN".
LOAD: To recall the stored sound settings.
SAVE: To save the sound settings.
INITIAL: To initialize the sound settings.
The load and the save can be adjusted as
follows.
16 DXZ775USB
2-1. Select "PRESET".
3-1. Press the
[~II ENT] button.
3-2. Push the
[SEEK PANEL] leftward or
rightward and select from:
"LOAD"
~ "SAVE" ~ "INITIAL" ~
"LOAD"...
3-3. Push the [P.CH] button upward or
downward to adjust the load and the save.
LOAD :"SELECTING 1" to "SELECTING
\3" (The factory default setting is
"SELECTING 1
")
SAVE :"1" to "3" (The factory default
setting is
"1 ")
3-4. Press and hold the [~II ENT] button to
store into memory.
(LOAD: Press and hold the button for 1
second or longer.
SAVE: Press and hold the button for 2
seconds or longer.)
•Setting the all seat
"The setting of "T ALIGNMENT" and "SPEAKER
GAIN" temporarily returns to the factory default
setting. When the setting that is adjusted for the
driver's seat returns to the factory default
setting, asound suitable for all seats is
provided.
*The factory default setting is "OFF".
2-1. Select "ALL SEAT".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".