Clarke air movers Manual

OPERATING & MAINTENANCE
INSTRUCTIONS
AXIAL PLATE FANS
AXIAL PLATE FANS
0201

Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the machine’s data plate
For Spare Parts and Service,please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: [phone]
PARTS & SERVICE FAX: [phone]
or e-mail as follows:
PARTS: [e-mail]
SERVICE: [email protected]
Parts & Service Contacts
2

Thank you for purchasing your new Clarke Axial Plate Fan. Before attempting
to operate this machine please read this instruction manual thoroughly
and follow all directions carefully. This is for your own safety and that of
others around you, and to help you achieve long and trouble free service
from your fan.
Guarantee
This product is guaranteed against faults in manufacture for 12 months from
purchase date. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product has been abused or tampered with
in any way, or not used for the purpose for which it is intended. The reason
for return must be clearly stated.
This guarantee does not affect your statutory rights.
3
Before Installation
1. Ensure that the impeller has not been damaged or distorted during transit.
2. Check that the impeller rotates freely and is secured tightly to the shaft. If the
tip clearance of the blades is not sufficient slacken the motor bolts and re-
align.
Installation
1. Mount the fan securely using the 4 bolt holes provided in the outer casing.
2. Ensure that the installation is free from any vibration which could damage the
impeller or motor bearings.
3. Ensure that when installed the impeller side of the fan cannot be touched i.e.
if this is not covered by ducting or cowling, then the optional side guard must
be fitted.
4. IMPORTANT - If a fan (without louvre shutters) is used for a reversible air flow,
the fan must always be completely stopped before changing direction.
5. Air Flow Direction - See the section on electrical connection for guidance on
wiring for air flow direction.

WARNING!
THIS APPLIANCE MUST BE EARTHED
Connect the mains lead, through a suitably fused isolator switch, to a 230 Volt
(50Hz) electrical supply, having a fuse rating in accordance with the specifications
given on Motor Data Plate. A standard, domestic type, 13 Amp plug MUST NOT
be used with this Fan.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the flexible lead of this appliance may not correspond with the
coloured markings identifying terminals in your electrical supply, proceed as follows:
• Connect GREEN & YELLOW cord to terminal marked with a letter “E” or
Earth symbol “ ” or coloured GREEN or GREEN & YELLOW.
• Connect BROWN cord to terminal marked with “L” or coloured RED.
• Connect BLUE cord to terminal marked with “N” or coloured BLACK.
Electrical Connections
Direction of Air Flow
To achieve air flow direction A or
B (fig 1.), the fan should be wired
as shown in fig 2. (A similar
diagram is also included inside the
fan motor terminal box).
Consult a qualified electrician
if you are in any doubt about
the electrical connection of
this fan.
Terminal Box Connections
4

Operation
1. These fans are suitable for ambient temperature between -20OC and +50OC.
2. Use for ventilation only. NOT suitable for extracting flammable material.
Maintenance
WARNING!
DISCONNECT THE FAN FROM THE ELECTRICITY SUPPLY BEFORE ANY INSPECTION
OR MAINTENANCE.
1. Check that the impeller and motor bolts and nuts are fully tightened within the
first 100 hours of use, and periodically after this.
2. Ensure that the impeller, motor and fan housing are kept clean. This is important
for the ongoing safe use of this fan.
3. Periodically check that the fan installation is free from corrosion.
Specifications
Dimensions (mm)
Model A B C D E F G H
CAF304 400 350 25 315 45 15 195 255
CAF354 450 400 25 365 45 15 238 298
CAF404 500 450 25 420 45 15 238 298
CAF454 550 500 25 470 45 15 247 306
CAF506 600 550 25 520 45 15 273 332
CAF556 680 630 25 570 45 15 247 307
CAF606 730 680 25 620 45 15 273 332
5

Performance
Model RPM Power Sound Power Sound Pressure
kW Level db(A) Level at 3M (db(A)
CAF304 1400 0.06 72 55
CAF354 1400 0.18 76 59
CAF404 1400 0.25 75 58
CAF454 1400 0.36 80 63
CAF506 900 0.18 73 56
CAF556 900 0.25 76 59
CAF606 800 0.36 80 73
Part No.
CAF304 CAF354 CAF404 CAF454 CAF506 CAF556 CAF606
1Side Guard 3230102 3230112 3230122 3230132 3230142 3230152 3230162
2Assy Screws 3230103 3230113 3230123 3230133 3230143 3230153 3230163
2.1 Nut 3230103A 3230113A 3230123A 3230133A 3230143A 3230153A 3230163A
2.2 G. Washer 3230103B 3230113B 3230123B 3230133B 3230143B 3230153B 3230163B
2.3 G. Washer 3230103C 3230113C 3230123C 3230133C 3230143C 3230153C 3230163C
2.4 Washer 3230103D 3230113D 3230123D 3230133D 3230143D 3230153D 3230163D
3Fan Plate 3230104 3230114 3230124 3230134 3230144 3230154 3230164
4Impeller 3230105 3230115 3230125 3230135 3230145 3230155 3230165
4.1 Screw 3230105A 3230115A 3230125A 3230135A 3230145A 3230155A 3230165A
4.2 G. Washer 3230105B 3230115B 3230125B 3230135B 3230145B 3230155B 3230165B
4.3 Washer 3230105C 3230115C 3230125C 3230135C 3230145C 3230155C 3230165C
5Motor Guard 3230106 3230116 3230126 3230136 3230146 3230156 3230166
6Assy Screws 3230107 3230117 3230127 3230137 3230147 3230157 3230167
6.1 H. Nut 3230107A 3230117A 3230127A 3230137A 3230147A 3230157A 3230167A
6.2 Washer G 3230107B 3230117B 3230127B 3230137B 3230147B 3230157B 3230167B
6.3 Antivib. Mtg. 3230107C 3230117C 3230127C 3230137C 3230147C 3230157C 3230167C
6.4 Antivib. Spacer 3230107D 3230117D 3230127D 3230137D 3230147D 3230157D 3230167D
6.5 Washer 3230107E 3230117E 3230127E 3230137E 3230147E 3230157E 3230167E
6.6 H. Screw 3230107F 3230117F 3230127F 3230137F 3230147F 3230157F 3230167F
7Motor 3230108 3230118 3230128 3230138 3230148 3230158 3230168
8Assy Screws 3230109 3230119 3230129 3230139 3230149 3230159 3230169
8.1 H. Screw 3230109A 3230119A 3230129A 3230139A 323019A 3230159A 3230169A
8.2 Plate Washer 3230109B 3230119B 3230129B 3230139B 3230149B 3230159B 3230169B
8.3 Washer 3230109C 3230119C 3230129C 3230139C 3230149C 3230159C 3230169C
8.4 G. Washer 3230109D 3230119D 3230129D 3230139D 3230149D 3230159D 3230169D
8.5 H. Nut - 3230119E 3230129E 3230139E 3230149E 3230159E 3230169E
Parts List
No. Description
6

Parts Diagram
Accessories
A full range of draught operated Louvre Shutters,
Impeller Side Guards and Fan Speed Regulators
is available. Please contact your Clarke dealer
for details
7