Clarke CARS1 Instruction Manual

OPERATION & MAINTENANCE
INSTRUCTIONS
LS1117 - ISS 2
ORIGINAL INSTRUCTIONS
ROLLER STAND
MODEL NO: CARS1
PART NO: 6500980

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for selecting this Clarke roller stand.
Read this manual before use and save it for future reference.
SAFETY
• Minimum Working Height 690 mm - Maximum Load 60 kg.
• Maximum Working Height 1050 mm - Maximum Load 45 kg.
• Make sure that the lock handle is properly tightened before use.
• Do not use the stand as a step ladder or scaffold.
• Never use the product if any parts are missing.
ASSEMBLY
ATTACH THE FEET
ATTACH THE LOCK HANDLE

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ATTACH THE ROLLER HEAD
HOW TO USE THE ROLLER STAND
1. Open the legs of the stand fully.
• For increased stability, always
push the workpiece over the
roller from the rear of the stand
as shown.
ADJUST THE HEIGHT
1. Rotate the lock handle
counterclockwise to loosen the
roller head.
2. Lift the roller head to the correct
height (between 690 - 1050 mm).
3. Rotate the lock handle clockwise
to lock the roller into position.